HomeMy WebLinkAboutBlock Iron & Supply/Convention Center/Oshkosh Centre 1985 AGREEMENT
THIS AGREEMENT made and entered into this 8th day of March,
1985, by and between BLOCK IRON & SUPPLY CO., P.O. Box 557, Oshkosh,
WI 54902 party of the first part, and the CITY OF OSHKOSH, a
municipal corporation located in Winnebago County , Wisconsin ,,
hereinafter referred to as the "City", and party of the second part.
WITNESSETH:
WHEREAS, the Common Council of the City of Oshkosh by resoluton
duly adopted on the 7th day of March, 1985 , accepted the bid of the
first party and authorized and directed the proper City officials to
enter into an agreement with the party of the first part for:
hardware, locks, closers for Oshkosh Centre project
according to the specifications and bid for same on file in the
office of the City Clerk .
NOW, THEREFORE, pursuant to said resolution of the Common
Council of the City of Oshkosh, the parties hereto agree as
follows:
1 . That the party of the first part will furnish same to
the City, all in accordance with the specifications and bid on file in
the office of the City Clerk.
2. That no assignment of this agreement or of any rights
thereunder by said party of the first part, shall be valid with-
out the written consent of the City; and that this document
including the specifications and bid, constitutes the entire
agreement between the parties hereto and that any understanding
either oral or written, not a part hereof shall not be binding on
either party.
3. That in consideration thereof, the City will pay to the
first party the sum of $61,445.00, upon presentation of a proper
voucher, and delivery and acceptance by the City in conformity on
said specifications and bid .
1
IN WITNESS WHEREOF, the parties hereto have caused this
agreement to be signed by the proper officers of each party and
their corporate seals to be hereunto affixed all on the day and
year first above written; then if first party is a corporation or
partnership, the signing of this agreement shall constitute a
warranty by the person (s) so signing the proper authority so to
do.
In the Presence of: BLOC I ?ON & S 'P CO.
l 1. ��� �7� -6 BY: I i,r ' / i..'
i,- Signature •f the sole pro-
/,, - '-. `5� c��- pr ' etar, or n.me or corporation
or partnership
//
President or Partner
Secretary
CITY OF/SHKOSH
j 4W / it-1c i/ BY: 47/ �!rc�.-
f� William D. rueh,. City
`� M nagger i �;?
• !'i�+, 1 � �_ .� • And: ` _z ,?/i ' _ „/;' //
/ Donna C. Serwas ,
City Clerk
Approv-d as to . 14 d -cution: I hereby certify that the
,/ / necessary provisions have
`� '' ' -- , ti's ` been made to pay the lia-
Warren P. Kraft, bility that will accrue
Asst. City Attorney under this Contract.
i.
EDWARD A NOKES ,
City Comptroller
2
A
0 '0 00 N tp
N . I-.. '"S V
0' 00 CD N20
Ps'• n CD 0
o PC- C-4
(i) rb b
• oH Or) 03 al
x ■-1 w '-sc
o `< PT'r-,•
V 20 H F--'CD
VI P 'I
Cl) VI cn
c0 ACS• •
• o b W V) •
N b CD d =
H. A "S '0
`< . 'L7
N
n
0
• 20
Cl) •
CD
H▪.
n
CD =
9
H d
n 9
• z
_ _ _ rn
co H
t7 r
CC) 0
1 n
C
rn ON ~0 V)
rn
'� z
40 0 m n
cn r-, d r
u, o
d ti 0
O o rn rn
o o to =1\ Cl)
4_ o
9 'II
Z 0
~<
N Q
U7 Cn
CO W . x
0 o
I I 0 - o
rn c0 VD
N N r' CO =
0 0 H Ln
< n
Cy a rn rn
in w z z
U) Cr)
rn
z z
CD CD
r+ e•
w rn
O 0 z
CS• a. cn
P) w
s<
( U)
L
`• N 9
CD 7
P s<
-.1 CD 9
P.)
(
PROPOSAL
HARDWARE , LOCKS , CLOSERS , AND PADLOCKS FOR THE
CITY OF OSHKOSH CONVENTION CENTRE
We , the undersigned propose tofurnish the City of Oshkosh, Wis-
consin the neccessary hardware for the Convention Centre , as per
specifications or approved equal for the following amounts deliv-
ered to the job site .
$ 61 ,445.00
BID
$ Sixty One Thousand Four Hundred Fourty Five
Dollar amount in writing
Brand names to be used Per specifications - Butts=Hager; Locks and
Panics=Sargent; Flat Goods=Quality; Thresholds and Weatherstrip=Reese
Delivery: 90 - 120 days after approval .
Terms : Net 30 days
Warranty : One year on material only.
Block Iron & Supply Co.
Name of Company
Douglas W. Fritz
Person completing this bid
SUBMITTED BY: P.O. Box 557 36 E. 10th Ave.
Address
Oshkosh, WI 54902
City , State , Zip code
Feb. 25, 1985 (414 ) 231-7200
Date Telephone Number
�y �
& OSh
PURCHASING DIVISION
NOTICE TO VENDORS:
1 . We are submitting herewith for your consideration an invita-
tion to bid on:
HARDWARE , LOCKS , CLOSERS , AND PADLOCKS FOR
CITY OF OSHKOSH CONVENTION CENTRE
2 . Bids must be addressed to Oshkosh Purchasing Division, P.O. Box
1130, City Hall , Oshkosh, Wisconsin 54902 . Envelope shall show
name of bidder , and must be plainly marked in the lower left
hand corner "Bid for Hardware".
3 . Bids must be on file in the office of the Purchasing Agent no
later than 10 :30 a.m. , C.S.T. , Monday, February 25 , 1985
Any bids received after that hour and date will not be opened and
will be returned to the bidder unread.
4. A written request for the withdrawal of a bid or any part thereof
may be granted if the request is received by the City prior to the
specified time of opening .
5 . All formal bids submitted shall be binding for thirty-five (:35)
calendar days following bid opening date , unless the bidder(s )
upon request of the Purchasing Agent , agrees to an extension.
6 . Bids will publicly opened and read at the hour and date above
stated. Award, if any , will be made as soon thereafter as practical .
7 . Although no certified check, cashier ' s check , or bid bond must
accompany the proposal , if the bid is accepted, the bidder must
execute and file the proper contract within ten ( 10) days after
award by the Common Council and receipt of the contract form for
signature .
8 . The City reserves the right to reject any and all bids and to
waive any informalities in bidding.
9 . For specifications and further information concerning this
invitation to bid, contact Donald La Fontaine , Purchasing Agent ,
Room 312 , City Hall or telephone (414) 236-5100 .
William D. Frueh
City Manager
PUBLISH: February 13 & 15th, 1985
CITY HALL - 215 CHURCH AVENUE - P .Q . BOX 1130 - OSHKOSH , WI 54902
GENERAL PROVISIONS
I. Proposals shall be submitted on the sheets provided by the City of Oshkosh
and proposals not submitted on those forms will be considered irregular and
will not be read.
2. Unless stated otherwise in the specifications, all equipment or commodities
shall be new and the manufacturer's current model , complete with all standard
equipment and accessories.
3. Full identification of equipment or commodities quoted upon, including
brand, make, model , catalog identification number (if any) , and descriptive
literature where possible, must be furnished with the bid as an aid in
checking the bid against specifications. If the item bid varies in any way
from these specifications, special mention must be made of such points or
it will be understood that the bidder proposes to meet .all details of the
specifications.
4. Unless stated otherwise in the specifications, all prices shall be F.O.B.
Oshkosh, Wisconsin, stated destination, with all Federal Excise and Wisconsin
Sales taxes deducted. The City of Oshkosh is exempt from these taxes and
will furnish proper exemption certificate, if requested by the successful
bidder.
5. If a warranty applies, the bidder shall state the conditions of warranty.
6. When requested in the specifications, the bidder must state the nearest
location were parts and repair service will be available.
7. Delivery date must be stated in realistic terms to enable the bidder to
adhere to them.
8. Indicate your terms of payment. The City of Oshkosh pays invoices on the
first and third Thursday of the month.
9. If there are several items in the bid, the City of Oshkosh reserves the
right to accept separate items or to award the total bid to one supplier,
whichever is in the best interest of the City. If you bid is qualified in
this respect, clearly state whether your bid is for "all or none" or to
what extent it is qualified.
10. If there is a trade-in, the City of Oshkosh may elect to accept the bid
with trade-in or without trade-in, whichever is in the best interest of the
City.
11. Equipment or items must conform to all applicable Federal Occupational
Safety and Health Act provisions.
12. If two or more bidders submit identical bids and are equally qualified, the
decision of the City to make award to one or more of such bidders shall be
final. Selection shall be made by drawing lots. Cash discounts, when 10
days or longer are allowed will be considered.
1983 HARDWARE AND SPECIALTIES 0870-1
PART 1 - GENERAL
1.01 RELATED WORK SPECIFIED ELSEWHERE: -
1. Finish Carpentry - Section 0610
2. Wood Doors - Section 0820
1.02 DESCRIPTION:
A. Furnish and deliver finish hardware, including accessories required
to fully equip in satisfactory manner, doors as shown and specified.
Include necessary screws, bolts, expansion shields and other devices
necessary for the proper hardware application.
B. Submit a complete schedule of all hardware and keying for approval.
C. After schedule approval, submit approved lists and templates to
suppliers and trades affected.
PART 2 - PRODUCTS
2.01 MATERIALS:
A. HARDWARE BY OTHERS:
Cabinet Hardware - Section 0620
Sliding Glass Door Hardware - Section 0620
Tambour Sliding Panel - Section 0620
Door Silencers - Section 0810
Signs - Section 1044
B. HARDWARE FOR OTHER MATERIAL:
Cylinders for Rolling Counter Doors - Room 162
Cylinders for Overhead Doors - Doors D-126 and D-128
Cylinders for Operable Partition Pocket Doors (6)
Cylinders for 2 pr. Radisson Hotel Skywalk Doors
C. KEYLINE:
All locks Master and/or Grand Master keyed as required. Furnish 6
Master, 6 Grand Master, and 3 keys per lock.
D. EQUALS
Butts - McKinney, Lawrence, Stanley
Locks - No Sub. (LNL for 8110 Series & OB for 7700 Series)
Closers - Sargent
0870-2 • HARDWARE AND SPECIALTIES 1983.
Flat Goods - Quality, Hiawatha, Cipco, Bulders Brass
Panic Devices - Von Duprin (Plated finishes only)
Sargent 6500 - V.D. 33 Series w/Brookline 087 Modified -
Sargent 6700 - V.D. 99 Series w/697 Trim
Sargent 6800 - V.D. 99 Series w/697 Trim
Thresholds - Weatherstrip - Penko, Zero
2.02 HARDWARE SETS
A. Hardware Set #1 - Doors D-1, D-2, D-3, D-4, D-25, D-26, D-47, D-48,
D-54, D-55, D-59, D-60, D-61, D-62, D-63, D-64, D-65, D-94, D-95, D-96.
Each door to receive:
4 Ea. Hager BB1199 - 5" x 4-1/2" - NRP - US10B Butts
1 Ea. Sargent 16-6510 x 823 x US10B Panic
(Sargent 16-6504 x 823 - on Doors D-1, D-26, D-48,
D-59, D-65, and D-94)
1 Ea. Sargent 71 x US10B (All doors) Cylinder
1 Ea. Sargent 64 x US10B (Doors D-1, D-26, D-48, D-59,
D-65, and D-94 only)
1 Ea. LCN 4040 x 18G x Stat Closer
1 Ea. .GJ 90 MS x US10B 0. H. Stop
(IVE 407-1/2 B1OB - Doors D-25, D-26, D-47, D-48,
D-54, D-55, D-94, D-96) Wall Stop
1 Ea. Reese 773 Sweep
1 Ea. Reese 5477A (2-1/2" longer than door width - to
butt around mullions and to overlap hinge jambs
by 1") Threshold
Weatherstrip by door and frame supplier.
B. Hardware Set #2 - Doors D-5, D-66. Each door to receive:
4 Ea. Haeger BB1199 - 5" x 4-1/2" - NRD - US10B Butts
1 Ea. Sargent 16-6510 x 823 x US10B Panic
1 Ea. Sargent 71 x US10B Cylinder
1 Ea. IVE 407-1/2 BLOB (Door D-5) Wall Stop
1 Ea. GJ 90 MS x US10B (Door D-66) 0. H. Stop
1 Ea. Reese 773 Sweep
1 Ea. Reese 5477A (2-1/2" longer than door width - to
butt around mullions and to overlap hinge jambs
by 1")
For LCN Handicapped Hardware - See Set #24.
•
1983 HARDWARE AND SPECIALTIES 087D-3
C. Hardware Set #3 - Doors D-6, D-7, D-8, D-9, D-67, D-68, D-69, D-70,
D-71, D-73, D-74, D-77, and D-78. Each door to receive;
4 Ea. Haeger BB1168 - 5" x 4-1/2" - US10B -.Butts
1 Ea. Sargent 16-6510 x 823 x US10 Panic
(Sargent 16-6504 x 823 on Doors D-6, D-674 D-73, D-77)
1 Ea. Sargent 71 x US10B (All doors) Cylinder
1 Ea. Sargent 64 x US10B (Doors D-6, D-67, D-73, and
D-77 only) Cylinder
1 Ea. LCN 4040 x 18G x Stat (Spec. Arm if required) Closer
(LCN 4040 x EDA x Stat - Doors D-73, D-74, D-77,
and D-78) Closer
1 Ea. Brookline 8" x 2" LDW x US10B (Doors D-73, D-74,
D-77, D-78 only) Kick
1 Ea. GJ 90 M x US10B 0. H. Holder
(GJ W2X x US10B - Doors D-73, D-74, D-77, and D-78) Wall Holder
D. Hardware Set #4 - Doors D-10, and D-72. Each door to receive:
4 Ea. Haeger BB1168 5" x 4-1/2" US10B Butts
1 Ea. Sargent 16 - 6510 x 823 x US10B Panic
1 Ea. Sargent 71 x US10B Cylinder
1 Ea. GJ 90 M x US10B Stop
For LCN Handicapped Hardware - See Set #24.
E. Hardware Set #5 - Doors D-11, D-12, D-13, D-100 and D-101.
Each door to receive:
4 Ea. Haeger BB1168 5" x 4 1/2" US10B Butts
1 Ea. LCN 4040 - Cush-H x Stat Closer
1 Ea. Sargent 813 FLW x US10B Pull
1 Ea. Brookline 72 (10 x 20) x US10B Push
1 Ea. Brookline 8" x 2" LDW x US10B Kick
1 Ea. IVE 407 1/2 BlOB (Doors D-11, D-13, and D-101) Wall Stop
F. Hardware Set #6 - Pr. Doors D-14/D-15, D-16/D-17, D-18/D-19,
D-35/D-36, D-41/D-42, D-50/D-51, D-75/D-76, D-79/D-80, D-83/D-84,
D-29/D-30, D-31/D-32, D-33/D-34, D-39/D-40, D-102/D-103, D-104/D-105,
D-106/D-107, D-109/D-110, D-37/D-38. Each door to receive:
8 Ea. Haeger BB1279 5" x 4 1/2" - US10B Butts
2 Ea. LCN 4040 - EDA Closer
(LCN 4040 - Cush-H Doors D-35, D-38, D-41, D-51,
D-39, D-40, D-29, D-30, D-31, D-32, D-33, D-34,
D-102, D-103, D-104, D-105, D-106, D-107, D-109,
and D-110)
1 Ea. Sargent 16 - 14 - 6710 x 813 FLW x US10B Panic
1 Ea. Sargent 16 - 14 - 6710 x 313 x 813 FLW x US10B Panic
3 Ea. Sargent 72 x US10B Cylinders
2 Ea. GJ W2Y x US10B (Doors D-14, D-15, D-16, D-17, D-18,
D-19, D-36, D-37, D-42, D-50, D-75, D-76, D-79, D-80,
D-83, and D-84)/
(IVE 407-1/2 BlOB - Doors D-29, D-30, D-31, D-34, D-39,
and D-40)
0870-4 HARDWARE AND SPECIALTIES 1983
F. Hardware Set #6 Continued
2 Ea. Reese D579 DUR x 7'10" Sound Seal
1 Ea. Reese 757 DUR x 6'0" Sound Seal
2 Ea. Reese 430 x 3'0" Sound Bottom
1 Ea. Zero 34MD x 7'10" Astragal
2 Ea. Brookline 8" x 2" LDW x US10B (Omit bottom
row of screws) Kick
(Brookline 48" x 2" LDW x US10B Doors d-102, D-103,
D-104, D-105, D-106, D-107, D-109, D-110 - Omit
bottom row of screws) Armor
G. Hardware Set #7 - Doors D-27, D-28, D-56, D-57, D-97, D-98 and D-99.
Each door to receive:
4 Ea. Haeger BB1168 5" x 4-1/2" US10B Butts
1 Ea. LCN 4040 x 185 Stat. Closer
1 Ea. Sargent 823 x US10B Pull
1 Ea. IVE 407 1/2 B10B Stop
(GJ 90 M x US10B - Door D-98) Stop
H. Hardware Set #8 - Doors D-20, D-21, D-22, and D-23.
Each door to receive:
1 Ea. Adams Rite MX1850A x 313 lock
1 Ea. Sargent 72 x US10B Cylinder
1 Ea. Adams Rite Pull
I. Hardware Set #9 - Doors D-24, D-43, D-49, D-58, D-81, D-111, D-151,
D-152, and D-153. Each door to receive:
4 Ea. Haeger BB1279 5 x 4-1/2 US10B Butts
1 Ea. Sargent 82 - 8104 x US10B Lock
(Sargent 82-12-8104 x US10B - Door D-49) Lock
1 Ea. IVE 407-1/2 B10B Stop
1 Ea. Brookline 8" x 2" LDW x US10B Kick
1 Ea. LCN 4040 x EDA x Stat. x T.B. (Door D-49 only) Closer
(LCN 4040 - Reg. x Stat. - Door D-153 only) Closer
J. Hardware Set #10 - Door D-44. Each door to receive:
4 Ea. Haeger BB1168 5" x 4-1/2" US10B Butts
1 Ea. Sargent 82-8137 x US10B Lock
1 Ea. GJ 384 HD x US10B 0. H. Holder
1 Ea. IVE 54 MB 10B Bolt
1 Ea. IVE 470 826D (Mount on bottom half) Stop
K. Hardware Set #11 - Doors D-45, and D-46. Each door to receive:
3 Ea. Haeger BB1163 x 5" x US10B Butts
1 Ea. Sargent 12-82-8116 x US10B Lock
1 Ea. LCN 4040 - Reg. x T.B. x Stat. Closer
1 Ea. IVE 407 1/2 BlOB Stop
1 Ea. Brookline 8" x 2" LDW x US10B Kick
1983 HARDWARE AND SPECIALTIES 0870-5
L. Hardware Set #12 - Doors D-52, and D-53. Each door to receive:
4 Ea. Haeger BB1168 5" x 4-1/2" x US10B Butts
1 Ea. Sargent 813 FLW x US108 _Pull _. _
1 Ea. Brookline 72 (10 x 20) x US32D Push
1 Ea. Brookline 8" x 2" LDW x US32D Kick
1 Ea. Ive 407-1/2 BlOB Stop _. -
1 Ea. LCN 4041-EDA x Alum. 'Closer
-
1 Ea. Sargent 82-15-4878 x US10B x US26D Deadlock
M. Hardware Set #13 - Doors D-82, D-85, d-87, D-88, D-89, D-91, D-92,
D-93, D-86, and D-90. Each door to receive:
4 Ea. Haeger BB1279 5" x 4-1/2" US10B Butts
1 Ea. Sargent 82 - 8105 - US108 Lock
(Sargent 8115 - US10B - Door D-86) Lock
(Sargent 82 - 8126 - US10B - Door D-90) Lock
1 Ea. LCN 4040 - Reg. x Stat. (Doors D-85 and D-93) Closer
1 Ea. IVE 407-1/2 BlOB Stop
1 Ea. Brookline 8" x 2" LDW x US10B Kick
N. Hardware Set #14 - Doors D-113/D-114, D-118/D-117, D-122/D-123,
D-124/D-125, D-138/D-139, D-136/D-137, and D-130/D-131.
Each pair doors to receive:
8 Ea. Haeger B81279 5" x 4-1/2" US26D Butts
1 Ea. Sargent 82 - 15 - 4875 x US26D Deadlock
2 Ea. Brookline 48" x 2" LDW 'x US32D Armor
1 Ea. GJ W2X x US26D (Doors D-114, D-118, D-117, D-122,
D-123, D-124, D-125, D-138, D-139, D-137, D-136 -
None on D-130 and D-131)
1 Ea. GJ F9X x US26D (Door D-113 - none on D-130 and D-131) Holder
2 Ea. IVE 453 F26D - 18" - US & MS Bolts
4 Ea. Brookline 780 x US32D Pull
2 Ea. LCN 4040 - Reg. - Alum. Closer
(LCN 4040 - Cush - H - Alum. Doors D-130 and D-131)
0. Hardware Set #15 - Doors D-115, D-116, D-127, D-132, D-133, D-134,
D-135, D-140, D-141, D-142, D-143, and D-155. Each door to receive:
4 Ea. Haeger BB1279 - 4-1/2" x 4-1/2" x US26D (NRP on
Door D-115) Butts
1 Ea. Sargent 82 - 15 - 7725 x US26D Lock
(Sargent 82 - 7704 x US26D -_ Doors D-127, D-133,
D-134, D-135, and D-140)
1 Ea. IVE 407 1/2 B26D Stop
1 Ea. Brookline 36" x 2" LDW x US32D (None on Doors D-116,
D-127, D-132, D-142, D-143, and D-155)
1 Ea. GJ W2X x US26D (Doors D-134, D-135, and D-140 only) Holder
1 Ea. LCN 4040 - Reg. x Alum. (Doors D-143 and D-155 Closer
Q870-6 HARDWARE AND SPECIALTIES 1983
P. Hardware Set "l' - Doors D-119, D-120, and D-121. Each door to receive!
4 Ea. Haeger BB1279 - 5" x 4-1/2" x US26D Butts
1 Ea. LCN 4040 - Reg. x Alum. Closer
1 Ea. Brookline 72 x US32D (10 x 20) _ Push
1 Ea. Brookline 54 x C x US32D Pull
1 Ea. Brookline 8" x 2" LDW x US32D Kick
1 Ea. Sargent 82 - 15 - 4878 x US26D Deadlock
1 Ea. IVE 407-1/2 B26D Stop
Q. Hardware Set #17 - Doors D-126, and D-128. Each door to receive:
1 Ea. Sargent 72 or 64 x US26D - as required Cylinder
R. Hardware Set #18 - Doors D-129, and D-146. Each door to receive:
4 Ea. Haeger BB1199 5" x 4-1/2" x NRP x US26D Butts
1 Ea. Sargent 16 - 6863 x 833 FLW x US26D (6804 -
Door D-146) Panic
1 Ea. Sargent 72 x US26D (None on Door D-146) Cylinder
1 Ea. Sargent 64 x US26D Cylinder
1 Ea. LCN 4040 EDA Alum. (None on Door 8-146) Closer
1 Ea. Brookline 8" x 2" LDW x US32D (None on Door D-146) Kick
1 Ea. IVE 407-1/2 B26D (None on Door D-146) Stop
1 Ea. Reese S477A (3'4-1/2" - cut around door frame)
(None on Door D-146)
1 Ea. Reese 773 Alum. (None on Door D-146) Sweep
1 Set Reese 770 Alum. (None on Door D-146) W/S
1 Ea. GJ 90 M x US26D (Door D-146 only) Stop
S. Hardware Set #19 - Doors D-144, and D-145. Each door to receive:
4 Ea. Haeger BB1199 5" x-4-1/2" x US26D x NRP Butts
1 Ea. Sargent 82 - 15 - 7725 x US26D Lock
1 Ea. LCN 4040 - Cush - H x Alum. Closer
1 Ea. Reese 5477A (3'3-1/2" - cut around frame) Threshold
1 Ea. Reese 773 x Alum. Sweep
1 Set Reese 770 x Alum. W/S
T. Hardware Set #20 - Doors D-147/D-148, and D-149/D-150.
Each pair doors to receive:
6 Ea. Haeger BB163 x 5" x US10B Butts
2 Ea. LCN 4040 - Cush - x T.B. x Stat. Closer
1 Ea. Sargent 12 - 6710 x 813 FLW - DT x US10B
(Doors D-148, D-149, and D-150) Panic
: ° ' i51't'1� '2-``67'1® x 313 x 813 FLW x-uS1OB
(Door D-147) Panic
2 Ea. Brookline 8" x 2" LDW x US10B Kick
2 Ea. Reese F-DS79 Dur x 7'2" W/S
1 Ea. Reese F-757 Dur x W/S
2 Ea. Reese F-804 Dur x (mount on outside of doors) W/S
1983 HARDWARE AND SPECIALTIES 0870-7
U. Hardware Set #21 - Door D-154. Each door to receive:
2 Ea. Haeger BBI191 5" x 4-1/2" x US10B x NRP Butts
1 Ea. Sargent 82 - 15 - 7726 x US10B Lock
1 Ea. GJ 90 M x US10B Stop
1 Ea. geese S498A x 3'0" Threshold
1 Ea. Reese 773 x Dur. x 3'0" Sweep
1 Set Reese 770 x Dur. x 3'0" x 4'8" W/S
V. Hardware Set #22 - Doors D-156/D-157. Each pair doors to receive:
8 Ea. Haeger BB1279 - 5" x 4-1/2" x US10B x NRP Butts
1 Ea. Sargent 82 - 15 - 4875 x US10B Deadlock
2 Ea. Brookline 780 x US10B Pull
2 Ea. GJ 375 x US10B Stop
2 Ea. IVE 453 FlOB - 18" Us & MS Bolts
W. Hardware Set #23 - Miscellaneous
Cylinders - (2) Roll down grille - Room D-162
(2 only 72 or 64 x US10B)
Cylinders - Pocket Doors - Rooms 141, 139, 137
(6 only 72 or 64 x US10B)
Cylinders - Panic Devices for Radisson Hotel
Skywalk Doors (4 only 72 or 64 x US10B)
Padlocks - 82 - 856 HSC & 82 - 85C x 6013 Kit (5 only)
Key Cabinet - Telkey AUC 150-S (1 only)
X. Hardware Set #24 - Handicapped Access Hardware
Doors D-66, D-72, D-5 and D-10
2 Ea. LCN 4924 x Alum. (Doors D-5, and D-66)
2 Ea. LCN 4923 x Alum. (Doors D-10, and D-72)
1 Lot LCN 925 Tubing - Approx. 2,000 Ft.
2 Ea. LCN 902 Control Box
2 Ea. LCN 938 Jamb Switch
6 Ea. LCN 936 Wall Plate Switch
1 Ea. LCN 921 Compressor w/automatic drain
0870-8 HARDWARE AND SPECIALTIES 1983.
PART 3 - EXECUTION
3.01 GENERAL:
A. Deliver to job -in manufacturer's original packages with labels
intact, marked with suppliers reference and identification. Provide
protective wrappings as required to avoid damage.
B. Hardware supplier shall cooperate and instruct General Contractor
in the installation of hardware and inspect work to see that all items
are properly installed and adjusted. Applicator shall avoid damage to
finished hardware and surrounding surfaces, and protect against damage,
especially during. painting.
C. The General Contractor shall install all finish hardware required
to complete the building. All Hardware shall be left, at the completion
of the work, absolutely free from tool marks, paint or stain blemishes
or spots of any kind and made to work properly.
•
PROPOSAL
HARDWARE , LOCKS , CLOSERS , AND PADLOCKS FOR THE
CITY OF OSHKOSH CONVENTION CENTRE
We , the undersigned propose tofurnish the City of Oshkosh, Wis-
consin the neccessary hardware for the Convention Centre , as per
specifications or approved equal for the following amounts deliv-
ered to the job site .
BID
Dollar amount in writing
Brand names to be used
Delivery :
Terms :
Warranty:
Name of Company
Person completing this bid
SUBMITTED BY:
Address
City , State , Zip code
1985 ( )
Date Telephone Number