HomeMy WebLinkAboutDalum's Utility Equipment Co., Inc./Forestry 1986 AGREEMENT
THIS AGREEMENT made and entered into this 2nd day of May,
1986, by and between DALUM'S UTILITY EQUIPMENT CO., INC. , P. O.
Box 177, Waukesha, WI 53187 party of the first part, and the
CITY OF OSHKOSH, a municipal corporation located in Winnebago
County, Wisconsin, hereinafter referred to as the "City", and
party of the second part.
WITNESSETH:
WHEREAS, the Common Council of the City of Oshkosh by reso-
luton duly adopted on the 1st day of May, 1986, accepted the bid
of the first party and authorized and directed the proper City
officials to enter into an agreement with the party of the first
part for:
One (1) Chip & Dump Unit
for Forestry Division
according to the specifications and bid for same on file in the
office of the City Clerk.
NOW, THEREFORE, pursuant to said resolution of the Common
Council of the City of Oshkosh, the parties hereto agree as
follows:
1. That the party of the first part will furnish same to the
City, all in accordance with the specifications and bid on file in
the office of the City Clerk.
2. That no assignment of this agreement or of any rights
thereunder by said party of the first part, shall be valid with-out
the written consent of the City; and that this document including
the specifications and bid, constitutes the entire agreement be-
tween the parties hereto and that any understanding either oral or
written, not a part hereof shall not be binding on either party.
3. That in consideration thereof, the City will pay to the
first party the sum of $17,494.00 , upon presentation of a proper
voucher, and delivery and acceptance by the City in conformity on
said specifications and bid.
IN WITNESS WHEREOF, the parties hereto have caused this agree-
ment to be signed by the proper officers of each party and their
1
corporate seals to be hereunto affixed all on the day and year
first above written; then if first party is a corporation or part-
nership, the signing of this agreement shall constitute a warranty
by the person(s) so signing the proper authority so to do.
In the Presence of: DA M'S UTILITY EQUIPMENT CO.
INC.
i Qvi(,`j 0:rf. ,, BY:
Signature of the sole pro-
p ' etor, or name or corporation
or partnership
E- , J ,_ _._)
P fa.i d e n t xxix 4'•4;4•t•C =•
L4 9. -
tri%64-\,
Secretary
I' i' CITY OF OSHKOSH
Al)�.(0, )L�' t_. BY: --/-1'//1
' `._. n Li
William D. Frueh, City
//, '/-t ll 7,e/11.
)
And ;Mayer 14,4
J
./// Donna C. Serwas,
City Clerk
A proved as orm .and execution: I hereby certify that the
!--- necessary provisions have
_(c ■,\ — iG \ been made to pay the lia-
Warren P. K aft, bility that will accrue
Asst. City Attorney under this Contract.
EDWARD A NOKES,
City Comptroller
$
2
0 0“)&401.0 A- sy
/
•
PURCHASING DIVISION
NOTICE TO VENDORS:
1 . We are submitting herewith for your consideration an invita-
tion to bid on:
ONE ( 1 ) CHIP AND DUMP UNIT FOR CITY OF OSHKOSH
FORESTRY DIVISION .
2 . Bids must be addressed to Oshkosh Purchasing Division , P.O. Box
1130, City Hall , Oshkosh, Wisconsin 54902 . Envelope shall show
name of bidder , and must be plainly marked in the lower left
hand corner "Bid for Chip & Dump"
3 . Bids must be on file in the office of the Purchasing Agent no
later than 10 : 30 a .m . , C.S .T. , Thursday , April 24 , 1986
Any bids received after that hour and date will not be opened and
will be returned to the bidder unread.
4 . A written request for the withdrawal of a bid or any part thereof
may be granted if the request is received by the City prior to the
specified time of opening .
5 . All formal bids submitted shall be binding for thirty-five (35)
calendar days following bid opening date , unless the bidder(s)
upon request of the Purchasing Agent , agrees to an extension.
6 . Bids will publicly opened and read at the hour and date above
stated. Award, if any, will be made as soon thereafter. as practica
7 . Although no certified check , cashier ' s check , or bid bond must
accompany the proposal , if the bid is accepted , the bidder must
execute and file the proper contract within ten ( 10) days after
award by the Common Council and receipt of the contract form for
signature .
8 . The City reserves the right to reject any and all bids and to
waive any informalities in bidding.
9 . For specifications and further information concerning this
invitation to bid, contact Donald La Fontaine , Purchasing Agent ,
Room 312 , City Hall or telephone (414) 236-5100 .
William D. Frueh
City Manager
PUBLISH: April 14 , 1986
CITY HALL - 215 CHURCH AVENUE - P .O . BOX 1130 - OSHKOSH , WI 54902
GENERAL PROVISIONS
1. Proposals shall be submitted an the sheets provided by the City of Oshkosh
and proposals not submitted on those forms will be considered irregular and
will not be read.
2. Unless stated otherwise in the specifications, all equipment or commodities
shall be new and the manufacturer's current model , complete with all standard
equipment and accessories.
3. Full identification of equipment or commodities quoted upon, including
brand, make, model , catalog identification number (if any) , and descriptive
literature where possible, must be furnished with the bid as an aid in
checking the bid against specifications. If the item bid varies in any way
. from these specifications, special mention must be made of such points or
it will be understood that the bidder proposes to meet ,all details of the
specifications.
4. Unless stated otherwise in the 'specifications, all prices shall be F.O.B.
Oshkosh, Wisconsin, stated destination, with all Federal Excise and Wisconsin
Sales taxes deducted. The City of Oshkosh is exempt from these taxes and
will furnish proper exemption certificate, if requested by the successful
bidder.
5. If a warranty applies, the bidder shall state the conditions of warranty.
6. When requested in the specifications, the bidder must state the nearest
location were parts and repair service will be available.
7. Delivery date must be stated in realistic terms to enable the bidder to
adhere to them.
8. Indicate your terms of payment. The City of Oshkosh pays invoices on the
first and third Thursday of the month.
9. If there are several items in the bid, the City of Oshkosh reserves the
right to accept separate items or to award the total bid to one supplier,
whichever is in the best interest of the City. If you bid is qualified in
this respect, clearly state whether your bid is for "all or none" or to
what extent it is qualified.
10. If there is a trade-in, the City of Oshkosh may elect to accept the bid
with trade-in or without trade-in, whichever is in the best interest of the
City.
11. Equipment or items must conform to all applicable Federal Occupational
Safety and Health Act provisions.
12. If two or more bidders submit identical bids and are equally qualified, the
decision of the City to make award to one or more of such bidders shall be
final . Selection shall be made by drawing lots. Cash discounts, when 10
days or longer are allowed will be considered.
SPECIFICATIONS
ONE ( 1 ) CHIP & DUMP UNIT
FOR CITY OF OSHKOSH FORESTRY DIVISION
The following are minimum specifications for one ( 1 ) Chip & Dump unit .
The vendor shall complete every space in the "Bidder ' s Proposal" column
with an "as specified" notation if the item being quoted is exactly as
specified, or a description to indicate any deviation of the item being
bid from the "specification" column. Any additions , deletions , or vari-
ations from the specifications must be noted.
ITEM SPECIFICATIONS BIDDER'S PROPOSAL
Engine 4 cyl . water cooled, gas engine , 60 hp
at 3000 RPM 163 CID full engine enclosure
and side panels
Clutch 10"
Tanks 30 gallon gas
30 gallon Hydraulic
Axle/brakes Tandem axle w/electric brakes
Stabilizers Adjustable rear stabilizer (2 ) with skid
plates
Gauges AMP, Oil , Fuel , Hourmeter , Tach AMP OIL
FUEL HM
Tach
Lights Complete highway package
Feed system Two 16" hydraulically powered solid steel
top and bottom feed rollers w/intermesh to
pull in small brances , as well as 12" dia.
logs . Top roller adjusts automatically ,
w/spring tension on both sides to size of
limb for positive feed . Full width feed
control bar across top & both sides to allow
forward-stop- reverse positions .
Infeed Maximum infeed opening 16"x14"
Chute 80" rectangular discharge chute to rear-
mounted dump box.
Chip box Smooth interior- no protrusions or reinforce-
ments inside . Structural steel reinforced
dump box w/10 gauge steel floor and reinfor-
ced sides . Feed stop ,drop gate , extra
heavy steel on sides and top at chip defle-
tion points . Latch mechanism w/positive
locking handle , no pull pins .
Knives (4 ) reversible & rotatable for double ser-
vice , bolted in two 14" solid knife pockets
ITEM SPECIFICATIONS BIDDER' S PROPOSAL
Disc Size 40" dia x 14" thick
Bearings 2- 7/16" taper roller bearings
Discharge
Chute 360° rotatable & adjustable
Blower (6) high velocity concave air discharge
paddles
Hydraulic Pump : 7 gpm @ 2800 RPM
Motors : 2 high torque 3300 in/lbs @ 2500 psi
Tank approx: 11 gallon capacity
Filter : cartridge type
Hoist for Hydraulic pump 9 gpm 1500 psi
Box coupled in-line to engine
Cylinder: 21" bofte , 48" stroke
Construction Trailer/frame 6" structural steel channel
reinforced throughout
Tires 4- 15" 6 ply , load range B, mounted
on semi-drop center 6-stud wheels equipped
with hub caps
Axles tandem- load range 12 ,000 pounds w/leaf
springs & heavy duty hubs
Chain Safety chain high tensile , pinned to frame
not welded, with grab hooks .
Lighting two tail lights
Capacity Dump box to have at least 8 cu yd dump
capacity
Paint Prime and two coats ,painted yellow
Miscell- Tool Box
aneous Pintle hitch
Extra set (4) knives
Set of operations & maintenance manuals
delivered & installed by authorized
factory representative
Dimensions Height : bidder to state
Width : bidder to state
Length : bidder to state
Trade-In : One ( 1 ) 1972 Wayne 16" Brush chipper model 16T318
To inspect call Rod Brusius (414) 236-5087
PROPOSAL
ONE ( 1 ) CHIP AND DUMP UNIT FOR FORESTRY DIVISION
We , the undersigned, propose to furnish the City of Oshkosh
Forestry Division one (1 ) Chip and Dump unit , as per attached
specifications , for the sum of :
Make and Model Number
Less Trade-In of one ( 1 ) 1972 Wayne 16"
trailer mounted, brush chipper $
NET BID WITH TRADE-IN $
BID WITHOUT TRADE-IN $
Delivery days after receipt of order
Warranty
Terms days
Name of Company
Name amd title of person
SUBMITTED BY: making out the bid.
Address of Company
1986
Date City tate Zip
NOTE: Descriptive literature must accompany bid
SPECIFICATIONS
ONE ( 1 ) CHIP & DUMP UNIT
FOR CITY OF OSHKOSH FORESTRY DIVISION
The following are minimum specifications for one (1 ) Chip & Dump unit .
The vendor shall complete every space in the "Bidder ' s Proposal" column
with an "as specified" notation if the item being quoted is exactly as
specified, or a description to indicate any deviation of the item being
bid from the "specification" column. Any additions , deletions , or vari-
ations from the specifications must be noted.
ITEM SPECIFICATIONS BIDDER'S PROPOSAL
Engine 4 cyl . water cooled, gas engine , 60 hp
at 3000 RPM 163 CID full engine enclosure as specified
and side panels
Clutch 10" "
Tanks 30 gallon gas
30 gallon Hydraulic " +'
Axle/brakes Tandem axle w/electric brakes " ++
Stabilizers Adjustable rear stabilizer (2) with skid T
plates
Gauges AMP, Oil , Fuel , Hourmeter, Tach AMP X OIL X
FUEL X HM x
Tach X
Lights Complete highway package as specified
Feed system Two 16" hydraulically powered solid steel
top and bottom feed rollers w/intermesh to
pull in small brances , as well as 12" dia.
logs . Top roller adjusts automatically,
w/spring tension on both sides to size of
limb for positive feed. Full width feed
control bar across top & both sides to allow
If
forward-stop- reverse positions .
Infeed Maximum infeed opening 16"x14" "
Chute 80" rectangular discharge chute to rear-
mounted dump box. "
Chip box Smooth interior- no protrusions or reinforce-
ments inside . Structural steel reinforced
dump box w/10 gauge steel floor and reinfor-
ced sides . Feed stop ,drop gate , extra
heavy steel on sides and top at chip defle-
1tion points . Latch mechanism w/positive
locking handle , no pull pins . "
Knives (4 ) reversible & rotatable for double ser-
vice , bolted in two 14" solid knife pockets "
ITEM SPECIFICATIONS BIDDER'S PROPOSAL
Disc Size 40" dia x 14" thick
as specified
Bearings 2- 7/16" taper roller bearings ft
Discharge
Chute 360° rotatable & adjustable
Blower (6) high velocity concave air discharge
paddles „ „
Hydraulic Pump : 7 gpm @ 2800 RPM
Motors : 2 high torque 3300 in/lbs @ 2500 psi
Tank approx: 11 gallon capacity
It „
Filter : cartridge type
Hoist for Hydraulic pump 9 gpm 1500 psi
Box coupled in-line to engine
Cylinder : 21/2" bode , 48" stroke
Construction Trailer/frame 6" structural steel channel
reinforced throughout
Tires 4- 15" 6 ply , load range B, mounted
on semi-drop center 6-stud wheels equipped
with hub caps "
Axles tandem- load range 12 ,000 pounds w/leaf
ft
springs & heavy duty hubs
Chain Safety chain high tensile , pinned to frame
not welded, with grab hooks . „ „
Lighting two tail lights „ „
Capacity Dump box to have at least 8 cu yd dump
capacity „ „
Paint Prime and two coats ,painted yellow t,
Miscell- Tool Box
aneous Pintle hitch
Extra set (4) knives
Set of operations & maintenance manuals
delivered & installed by authorized
factory representative „ „
Dimensions Height : bidder to state 8' 11"
Width : bidder to state 6' 6"
Length: bidder to state 17' 8"
Trade-In : One ( 1 ) 1972 Wayne 16" Brush chipper model 16T318
To inspect call Rod Brusius (414) 236-5087
PROPOSAL
ONE (1 ) CHIP AND DUMP UNIT FOR FORESTRY DIVISION
We , the undersigned, propose to furnish the City of Oshkosh
Forestry Division one ( 1 ) Chip and Dump unit , as per attached
specifications , for the sum of :
Badger TM-40-G2 Chip & Dump $ 19 , 550 .00
Make and Model Number
Less Trade-In of one (1 ) 1972 Wayne 16" 1 , 550 .00
trailer mounted, brush chipper $
NET BID WITH TRADE-IN $ 18 , 000 .00
BID WITHOUT TRADE-IN $ 19 , 550 .00
Delivery 60 days after receipt of order
Warranty 1 Year
Terms net % 30 days
Badger Chipper Company
Name of Company
William McMahon , Sales Manager
Name amd title of person
SUBMITTED BY: making out the bid.
P.O . Box 671
Address of Company
April 21 , 1986 1986 Bay City , MI 48707
Date City State Zip
NOTE: Descriptive literature must accompany bid
E-, cd cd cd
Z a) a) a)
P4 >, >, >,
P4
:n
>, v7
ad >, >
ro czl
>- c v7 b 'ID
C4 >. O >'
W v) «3 M aS O If)
> b 'C3 h.
.-.a W O a) O 4-> O
, w E-• z a)
ra z
z ,
o CD CD CD
C) CD CD
C1) F.
1--4 CD ct O
> O W in c- O
r. = C-a in M
1-i H o4 O) Cr) .-
>- w 3 E-. cI
O4 ■D
E-, co
C!) O)
W CD CD
fx (=) W CD O
o I--1 (=)
C34
, - w d O
N LY• CD 0)O)
P4 E-• E-+ O d-
0 a w\ •' •'
[I. 1-1 Z co
a
E. a
z
w
w a:1 _
a z ¢ c., %..o 0 CD
w cx t- A- rx C) O
a E-• o) W
0 '- w a CD CD
cn z a cn o
oa Cl) C!)r".>• F-. u) if)
Cl W d "• N
a 1---1 .-7 U
w
U
CD O CD
O N CD N CD
• C7 • CJ • .
...i O $.. I ' - $.. 1 U Sr
Lr) a) O O) 0C) O Cd
W a:1 in M cCC- M -0
z -"-0 I ^-1:1 I ^ 1•.
o w 0) cci rn cd ‘-• 0
r- IF. CA E-. N �
iJ
a)
>, E '
Cl.. c)
cr3 •-
a
E Cr t, •'
O N- W Co >
U O .- I. O)
t- >, Cr) a) '
Cu •::I• •r-1 •ri • •
R,— ,-'I t— •,-1 .C. ,.O L )
a.t- H •,•i N- U N
•-4 O 4) • - Cd Cr) 1-4
= = U •'
U X A X CO X
O 4-1 14 I-1 O : >. O
t•• w •1-1 - ^w (n cd CO cd
a) U E • a)
C.0 • U O • 'C 'Cr '- cd
'1 O >. r-I U O •
cd • cd cd • cd •,-i 4-, cd
wawa cal ao arx .z
PROPOSAL
ONE ( 1 ) CHIP AND DUMP UNIT FOR FORESTRY DIVISION
We , the undersigned, propose to furnish the City of Oshkosh
Forestry Division one ( 1 ) Chip and Dump unit , as per attached
specifications , for the sum of :
Morbark $ 21 , 300 . 00
Make and Model Number
Less Trade-In of one (1 ) 1972 Wayne 16"
trailer mounted, brush chipper $
NET BID WITH TRADE-IN $
BID WITHOUT TRADE-IN $ 21 , 300 . 00
Delivery 60 - 75 days after receipt of order
Warranty 1 year
Terms % days
Lindsay Machinery , Inc .
Name of Company
Joe Starr , President
Name amd title of person
SUBMITTED BY: making out the bid.
R . 1 , Box 326
Address of Company
April 23 1986 Manawa , WI 54949
Date City State Zip
NOTE: Descriptive literature must accompany bid
SPECIFICATIONS
ONE ( 1 ) CHIP & DUMP UNIT
FOR CITY OF OSHKOSH FORESTRY DIVISION
The following are minimum specifications for one ( 1 ) Chip & Dump unit .
The vendor shall complete every space in the "Bidder ' s Proposal" column
with an "as specified" notation if the item being quoted is exactly as
specified, or a description to indicate any deviation of the item being
bid from the "specification" column . Any additions , deletions , or vari-
ations from the specifications must be noted .
ITEM SPECIFICATIONS I BIDDER'S PROPOSAL
Engine 4 cyl . water cooled, gas engine , 60 hp
at 3000 RPM 163 CID full engine enclosure
and side panels
Clutch 10"
Tanks 30 gallon gas
30 gallon Hydraulic
Axle/brakes Tandem axle w/electric brakes
Stabilizers Adjustable rear stabilizer (2 ) with skid
plates
Gauges AMP, Oil , Fuel , Hourmeter , Tach AMP OIL
FUEL HM
Tach
Lights Complete highway package
Feed system Two 16" hydraulically powered solid steel 14" instead of 16"
top and bottom feed rollers w/intermesh to
pull in small brances , as well as 12" dia.
logs . Top roller adjusts automatically,
w/spring tension on both sides to size of
limb for positive feed. Full width feed
control bar across top & both sides to allow
forward-stop- reverse positions .
Infeed Maximum infeed opening 16"x14" opening 14" x 12"
Chute 80" rectangular discharge chute to rear-
mounted dump box.
Chip box Smooth interior- no protrusions or reinforce-
ments inside . Structural steel reinforced
dump box w/10 gauge steel floor and reinfor-
ced sides . Feed stop ,drop gate , extra
heavy steel on sides and top at chip defle-
tion points . Latch mechanism w/positive
locking handle , no pull pins .
Knives (4) reversible & rotatable for double ser- (2) instead of (4)
1vice , bolted in two 14" solid knife pockets
ITEM SPECIFICATIONS BIDDER'S PROPOSAL
Disc Size 40" dia x 11/4" thick 371" dia x 2" thick
Bearings 2- 7/16" taper roller bearings
Discharge
Chute 360° rotatable & adjustable
Blower (A) high velocity concave air discharge (4) instead of (6)
paddles
Hydraulic Pump : 7 gpm @ 2800 RPM
Motors : 2 high torque 3300 in/lbs @ 2500 psi
Tank approx: 11 gallon capacity 9 • gallon capacity
Filter : cartridge type
Hoist for Hydraulic pump 9 gpm 1500 psi
Box coupled in-line to engine
Cylinder : 22" bone , 48" stroke
Construction Trailer/frame 6" structural steel channel 2" x 4" rectangular
reinforced throughout
Tires 4- 15" 6 ply , load range B, mounted
on semi-drop center 6-stud wheels equipped
with hub caps
Axles tandem- load range 12 ,000 pounds w/leaf
springs & heavy duty hubs
Chain Safety chain high tensile , pinned to frame
not welded, with grab hooks .
Lighting two tail lights
Capacity Dump box to have at least 8 cu yd dump
capacity
Paint Prime and two coats ,painted yellow
Miscell- Tool Box
aneous Pintle hitch
Extra set (4) knives
Set of operations & maintenance manuals
delivered & installed by authorized
factory representative
Dimensions Height : bidder to state 82 '
Width : bidder to state 7 , 7"
Length : bidder to state 182 '
Trade-In: One ( 1 ) 1972 Wayne 16" Brush chipper model 16T318
To inspect call Rod Brusius (414) 236-5087
A of OSt*
et's• QUOTATION NO. 86354
l‘PR 10 RECT
•
PURCHASING DIVISION
NOTICE TO VENDORS:
1 . We are submitting herewith for your consideration an invita-
tion to bid on:
ONE ( 1 ) CHIP AND DUMP UNIT FOR CITY OF OSHKOSH
FORESTRY DIVISION
2 . Bids must be addressed to Oshkosh Purchasing Division, P.O. Box
1130, City Hall , Oshkosh, Wisconsin 54902 . Envelope shall show
name of bidder , and must be plainly marked in the lower left
hand corner "Bid for Chip & Dump"
3 . Bids must be on file in the office of the Purchasing Agent no
later than 10 : 30 a .m . , C.S .T. , Thursday , April 24 , 1986
Any bids received after that hour and date will not be opened and
will be returned to the bidder unread.
4. A written request for the withdrawal of a bid or any part thereof
may be granted if the request is received by the City prior to the
specified time of opening.
5 . All formal bids submitted shall be binding for thirty-five (35)
calendar days following bid opening date , unless the bidder(s )
upon request of the Purchasing Agent , agrees to an extension.
6 . Bids will publicly opened and read at the hour and date above
stated. Award, if any, will be made as soon thereafter. as practica
7 . Although no certified check , cashier 's check , or bid bond must
accompany the proposal , if the bid is accepted, the bidder must
execute and file the proper contract within ten (10) days after
award by the Common Council and receipt of the contract form for
signature .
8 . The City reserves the right to reject any and all bids and to
waive any informalities in bidding.
9 . For specifications and further information concerning this
invitation to bid , contact Donald La Fontaine , Purchasing Agent ,
Room 312 , City Hall or telephone (414) 236-5100 .
William D. Frueh
City Manager
PUBLISH: April 14 , 1986
CITY HALL - 215 CHURCH AVENUE - P .O . BOX 1130 - OSHKOSH , WI 54902
GENERAL PROVISIONS
1 . Proposals shall be submitted on the sheets provided by the City of Oshkosh
and proposals not submitted on those forms will be considered irregular and
will not be read.
2. Unless stated otherwise in the specifications, all equipment or commodities
shall be new and the manufacturer's current model , complete with all standard
equipment and accessories.
3. Full identification of equipment or commodities quoted upon, including
brand, make, model , catalog identification number (if any) , and descriptive
literature where possible, must be furnished with the bid as an aid in
checking the bid against specifications. If the item bid varies in any way
. from these specifications, special mention must be made of such points or
it will be understood that the bidder proposes to meet ,all details of the
specifications.
4. Unless stated otherwise in the 'specifications, all prices shall be F.O.B.
Oshkosh, Wisconsin, stated destination, with all Federal Excise and Wisconsin
Sales taxes deducted. The City of Oshkosh is exempt from these taxes and
will furnish proper exemption certificate, if requested by the successful
bidder.
5. If a warranty applies, the bidder shall state the conditions of warranty.
6. When requested in the specifications, the bidder must state the nearest
location were parts- and repair service will be available.
7. Delivery date must be stated in realistic terms to enable the bidder to
adhere to them.
8. Indicate your terms of payment. The City of Oshkosh pays invoices on the
first and third Thursday of the month.
9. If there are several items in the bid, the City of Oshkosh reserves the
right to accept separate items or to award the total bid to one supplier,
whichever is in the best interest of the City. If you bid is qualified in
this respect, clearly state whether your bid is for "all or none" or to
what extent it is qualified.
10. If there is a trade-in, the City of Oshkosh may elect to accept the bid
with trade-in or without trade-in, whichever is in the best interest of the
City.
11 . Equipment or items must conform to all applicable Federal Occupational
Safety and Health Act provisions.
12. If two or more bidders submit identical bids and are equally qualified, the
decision of the City to make award to one or more of such bidders shall be
final . Selection shall be made by drawing lots. Cash discounts, when 10
days or longer are allowed will be considered.
SPECIFICATIONS
ONE ( 1 ) CHIP & DUMP UNIT
FOR CITY OF OSHKOSH FORESTRY DIVISION
The following are minimum specifications for one (1 ) Chip & Dump unit .
The vendor shall complete every space in the "Bidder ' s Proposal" column
with an "as specified" notation if the item being quoted is exactly as
specified, or a description to indicate any deviation of the item being
bid from the "specification" column. Any additions , deletions , or vari-
ations from the specifications must be noted .
ITEM SPECIFICATIONS I BIDDER'S PROPOSAL
Engine 4 cyl . water cooled, gas engine , 60 hp
at 3000 RPM 163 CID full engine enclosure comply
and side panels
Clutch 10" comply
Tanks 30 gallon gas comply
30 gallon Hydraulic
Axle/brakes Tandem axle w/electric brakes comply
Stabilizers Adjustable rear stabilizer (2 ) with skid
plates comply
Gauges AMP, Oil , Fuel , Hourmeter, Tach AMP comply OIL comply
FUELcomply HM comply
Tach comply
Lights Complete highway package comply
Feed system Two 16" hydraulically powered solid steel
top and bottom feed rollers w/intermesh to comply
pull in small brances , as well as 12" dia.
logs . Top roller adjusts automatically ,
w/spring tension on both sides to size of
limb for positive feed . Full width feed
control bar across top & both sides to allow
forward-stop- reverse positions .
Infeed Maximum infeed opening 16"x14"
comply
Chute 80" rectangular discharge chute to rear- comply
mounted dump box.
Chip box Smooth interior- no protrusions or reinforce- comply
ments inside . Structural steel reinforced
dump box w/10 gauge steel floor and reinfor-
ced sides . Feed stop ,drop gate , extra
heavy steel on sides and top at chip defle-
tion points . Latch mechanism w/positive
locking handle , no pull pins .
Knives (4) reversible & rotatable for double ser- comply
vice , bolted in two 14" solid knife pockets
ITEM SPECIFICATIONS BIDDER'S PROPOSAL
Disc Size 40" dia x 14" thick comply
Bearings 2- 7/16" taper roller bearings comply
Discharge comply
Chute 360 o rotatable & adjustable
Blower (6) high velocity concave air discharge comply
paddles
Hydraulic Pump : 7 gpm @ 2800 RPM comply
Motors : 2 high torque 3300 in/lbs @ 2500 psi comply
Tank approx: 11 gallon capacity comply
Filter : cartridge type comply
Hoist for Hydraulic pump 9 gpm 1500 psi
Box coupled in-line to engine comply
Cylinder : 21/2" bone , 48" stroke
comply
Construction, Trailer/frame 6" structural steel channel
reinforced throughout
Tires 4- 15" 6 ply , load range B, mounted
on semi-drop center 6-stud wheels equipped
with hub caps comply
Axles tandem- load range 12 ,000 pounds w/leaf
springs & heavy duty hubs comply
Chain Safety chain high tensile , pinned to frame
not welded, with grab hooks . comply
Lighting two tail lights comply
Capacity Dump box to have at least 8 cu yd dump
capacity comply
Paint Prime and two coats ,painted yellow -amply
Miscell- Tool Box comply
aneous Pintle hitch comply
Extra set (4) knives comply
Set of operations & maintenance manuals comply
delivered & installed by authorized comply
factory representative
Dimensions Height : bidder to state 8 ' 11"
Width : bidder to state 6 ' 6"
Length : bidder to state 17 ' 8" plus hitch
Trade-In : One ( 1 ) 1972 Wayne 16" Brush chipper model 16T318
To inspect call Rod Brusius (414) 236-5087
PROPOSAL
ONE ( 1 ) CHIP AND DUMP UNIT FOR FORESTRY DIVISION
We , the undersigned, propose to furnish the City of Oshkosh
Forestry Division one (1 ) Chip and Dump unit , as per attached
specifications , for the sum of :
Badger TM40-G2 with chip and dump $ 19 ,994. 00
Make and Mode. Number
Less Trade-In of one (1 ) 1972 Wayne 16"
trailer mounted, brush chipper $ 2 ,500. 00
NET BID WITH TRADE-IN $17,494 . 00
BID WITHOUT TRADE-IN $ 19 ,994. 00
Delivery approx. 60 days after receipt of order
Warranty See enclosed statement
Terms Net 30 days
Utility Equipment Company, Inc.
Name of Company
/( a
David Roembke, Sales Administrator
Name amd title of person
SUBMITTED BY: making out the bid.
N4 W22610 Bluemound Road, P.O. Box 177
Waukesha, WI 53187-0177
Address of Company
April 16 , 1986 Waukesha, WI 53187-0177
Date City State Zip
NOTE: Descriptive literature must accompany bid