Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Certificate of Occupancy
CITY HALL Inspection Services Div 215 Church Avenue City of Oshkosh 0 PO Box 11301 r i a IA WI 54903 -1130 OJHKOIH ON THE WATER Approved: 2/25/2011 Issued: 3/02/2011 MM Properties Oshkosh LLC 280 E Fernau Dr Oshkosh WI 54901 CERTIFICATE OF OCCUPANCY An Occupancy Permit is hereby issued for the Warehouse Addition at 280 E Fernau Dr, Oshkosh WI as described in Building Permits Numbers 127276 and 139080 This building shall be used for a Storage Warehouse and is located in the M3 General Industrial District. LIMITATIONS: Maximum number of persons: Per State Approved Plan Certificate of Occupancy shall be required prior to occupancy, should additional building(s) be erected, or should any buildings mentioned above be altered or moved. The use of land, or buildings, shall not be changed until a Certificate of Occupancy is issued for that occupancy. All conditions noted above must be complied with in order for this certificate to be valid. Buil ing ystems Consultant Building Permit Work Card .ress 280 E FERNAU AVE Permit Number 0127276 Create Date 10/12/2007 Owner JAY & PETER SCHABLOSKI /JUNE MACADAN Contractor STODOLA -MARS CONSTRUCTION Category 210 - Addition Industrial Plan Z4- 2078 -0807 Occupany Permit Required Flood Plain No Height Permit Not Required Class of Const: 3B Use /Nature IND/ Construct 3200 sq. ft. addition as per plans. of Work HVAC Contr Plumbing Contr Electric Contr Inspections: Date/Time Inspected 08/09/2010 09:30AM Type Inspector Brian Noe Remaining Issues that were originally identified on FCN dated 1/8/2008 are compliant. --- CO to be issued Date/Time requested: 1/19/2011 02:19 PM Notice Type: Ready Date/Time: Access: Requested By: STODOLA -MARS CONSTRUCTION Phone Number: approved 0 Reinspect Fee 0 Fee Waived ❑ Reinspect Fee Paid Page 2 of 2 Building Permit Work Card Job Address 280 E FERNAU AVE Permit Number 0127276 Create Date 10/12/2007 Owner JAY & PETER SCHABLOSKI /JUNE MACADAM Contractor STODOLA -MAAS CONSTRUCTION Category 210 - Addition Industrial Plan Z4- 2078 -0807 Occupany Permit Required Flood Plain No Height Permit Not Required Class of Const: 3B Use /Nature IND/ Construct 3200 sq. ft. addition as per plans. of Work HVAC Contr Plumbing Contr Electric Contr Inspections: Date/Time Inspected 10/29/2007 12:OOAM Type Foundation Backfill Inspector Allyn Dannhoff REQUEST LINE / READY FOR A FOUNDATION* *WOULD LIKE THE INSPECTION 10/29/07- MONDAY AT NOON, HE WOULD ALSO LIKE TO BE PRESENT FOR THE INSPECTION ** Date/Time requested: 10/26/2007 01:16 PM Notice Type: Ready Date/Time: 10/29/2007 12:OOPM Access: Requested By: STODOLA -MAAS CONSTRUCTION - Chuck Phone Number: (920) 960 -8004 no time O Reinspect Fee O Fee Waived ❑ Reinspect Fee Paid Date/Time Inspected 01/08/2008 12:OOAM Type Inspector Allyn Dannhoff REQUEST LINE / WOULD LIKE A PARTIAL OCCUPANCY INSPECTION.SEE FCN Date/Time requested: 1/7/2008 11:16 AM Notice Type: Ready Date/Time: 01/08/2008 12:OOAM Access: Requested By: STODOLA -MAAS CONSTRUCTION - Larry Phone Number: (920) 960 -9207 not approved 0 Reinspect Fee O Fee Waived ❑ Reinspect Fee Paid Date/Time Inspected 03/31/2008 12:OOAM Type Inspector Allyn Dannhoff Most items addressed. Send notice on Make -up Air for Paint Booth. SEE FCN. Date/Time requested: Notice Type: Ready Date/Time: Access: Requested By: Phone Number: not approved 0 Reinspect Fee O Fee Waived ❑ Reinspect Fee Paid Page 1 of 1 Building Permit Work Card Job Address 280 E FERNAU AVE Permit Number 0127276 Create Date 10/12/2007 Owner JAY & PETER SCHABLOSKI /JUNE MACADA? Contractor STODOLA -MAAS CONSTRUCTION Category 210 - Addition Industrial Plan Z4- 2078 -0807 Occupany Permit Required Flood Plain No Height Perrnit Not Required Class of Const: 3B Use /Nature IND/ Construct 3200 sq. ft. addition as per plans. of Work HVAC Contr Plumbing Contr Electric Contr Inspections: Date 10/29/2007 : Type Foundation Backfill Inspector Allyn Dannhoff no time REQUEST LINE / READY FOR A FOUNDATION "'WOULD LIKE THE INSPECTION 10/29/07- MONDAY AT NOON. HE WOULD ALSO LIKE TO BE PRESENT FOR THE INSPECTION" Date /Time requested: 10/26/2007 01:16 PM Notice Type: Ready Date /Time: 10/29/2007 12:00 PM Access: Requested By: STODOLA -MAAS CONSTRUCTION - Chuck Phone Number: (920) 960 -8004 Reinspect Fee C Fee Waived ❑ Reinspect Fee Paid Date VOS : W Type Q Inspector Allyn Dannhoff REQUEINE /WOULD LIKE A PARTIAL OCCUPANCY INSPECTION ENTERED Date /Time requested: 1/7/2008 11:16 AM Notice Type: Ready Date /Time: 1/8/2008 00:00 Access: Requested By: STODOLA -MAAS CONSTRUCTION Larry Phone Number: (920) 960 -9207 Reinspect Fee D Fee Waived ❑ Reinspect Fee Paid ® E, k - � _ /. ; � Page 1 of 1 OTICE 1 FIELD IN PORT EION OIORRECTION N ORT - (9 0 C JOB LOCATION: ' 0 i - , lic CONTRACTOR: SO.' Ad ' " �. City of Oshkosh CONTRA ��e r �s w Inspection Services Division PROJE TO BE INSPECTED' 215 Church Avenue, PO Box 1130 ' , Oshkosh, W] 54903 -113 Phone: (920) 236 -5050 TYPE OF INSPECTION • r-- ' `- Fax (920) 236 -508 or to concealment approved within 30 days unless otherwise noted. u tllifo and date re-inspections tn bottom o notice Violations orcmust y. corrected and pp '. . rte / � of and/or occupancy. Upon completing the corrections, the owner/contractor/agent - { ipe and return it to the Inspection Services Division by the Compliance a C T ION RE SUL T S MOMS CODE .• s s WM 00 .z. • .. 0 r- 110411r.MI * . , . , , / — A- ! A. err dd uar _ um; if- . ./- -,- — - , ..,- -- - - - , st imm y i. _ 1 _ gm /11 AP x-_ ,"A"_ - 1, - .° _ • c• / -- I e_ _ o • ■.. . e..4_9 It e t• -�� c '/ ivy r- t-' r"MVP _ 1l •r. O. • I J _ //`` pry / `-'.. l /l . ltiw.V iii roved/ Ins Report iv n to ailed/Faxed 0 Not App Insp. epo • left on site 0 No pp p epo g / gvii'' �3/o g - -�-��� �� Phone # Signed d!..... - Da of nspection p- Lion Services Divisi� ; that the f � ' a1� n8 m y, $ • Print Name Company Signature: Date City of Oshkosh Division of Inspection Services 215 Church Avenue PO Box 1130 Oshkosh WI 54903 -1130 O n IC I www.ci.oshkosh.wi.us ON THE WATER f -I October 11, 2007 Thomas R. Karrels Thomas R. Karrels PESC 1934 Algoma Blvd Oshkosh, WI 54901 Lauren Schabloski Moe's Marine 2022 West Wind Rd Oshkosh, WI 54901 Site: Plan Number: Z4- 2078 -0807 Moe's Marine 280 E Fernau Ave. Oshkosh WI 54901 For: Description: Addition Object Type: Building only Class of Construction: lIIB - 3200 Sq Ft.; Unsprinklered Occupancy: S: Storage, B: Business / Office The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes and Wisconsin Statutes. The submittal has been CONDITIONALLY APPROVED. The owner, as defined in Chapter 101.01(10), Wisconsin Statutes, is responsible for compliance with all code requirements Key Item(s) / Conditions: • IBC 906.1 / IFC 906.3 The maximum travel distance allowed to a fire extinguisher is 75 feet. • IBC 1003.2.11 Means of egress illumination is required to be installed per this section. All paths of egress are required to have adequate emergency lighting to meet the performance requirements of IBC 1003.2.113. Existing means of egress emergency lighting is permitted to be maintained in compliance with the code in effect at the time of construction. Any altered path of egress, or new path of egress, and any new emergency lighting being installed is required to comply with current code requirements. • Comm 61.30(3) / IMC 507.2 This plan review does not include heating, ventilation, or air conditioning. HVAC plans are required to be submitted and approved prior to installation of HVAC equipment. Be aware that IBC 1004.3.2.4 contains additional restriction for air movement in corridors • Comm 6131(4) Revisions to approved plans. All proposed revisions and modifications which involve rules under this code and which are made to construction documents that have previously been granted approval by the department or its authorized representative, shall be submitted to the office that granted the approval. All revisions and modifications to plans shall be approved in writing by the department or its authorized representative prior to the work involved in the revision or modification being carried out. A revision or modification to a plan, drawing or specification shall be signed and sealed in accordance with Comm 61.31(1). 1:`1n pectiuns`,P(an ReviewCommerrial Plan Review 2007 \Z4 - 2078 -0807 230 F, Fernau Ave Bldg Only dot; Page 1 of 2 SUBMIT: • Comm 61.50 (4) Supervision. Prior to the initial occupancy of an alteration the supervising professional shall file a compliance statement form SBD -9720 with this office. A copy of the approved plans, specifications, and this letter shall be on -site during construction. All permits are required to be obtained prior to commencement of work. In granting this approval the City of Oshkosh Inspection Services Department reserves the right to require changes or additions should conditions arise making them necessary for code compliance. As per state stats 101.12(2), nothing in this review shall relieve the designer of the responsibility for designing a safe building, structure, or component. Inquiries concerning this correspondence may be made to me at the number listed below or the address on this letterhead. Re . .,pr y, B a n " oe Building Systems Consultant (920) 236 -5051 Monday — Friday 7:30 A.M. to 8:30 A.M and 12:30 A.M to 1:30 P.M. bnoe @ci.oshkosh.wi.us cc: Property file Fee Required $ 390.00 Fee Received $ 390.00 Balance Due $ 0.00 1 Plan Review'•(_omrnercial Plan Review 2007:24- 2078 -0807 2S0 E Fernau Ave Mk Only.doc Page 2 of 2 • City of Oshkosh Division of Inspection Services 215 Church Avenue PO Box 1130 Oshkosh I 54902 -1130 O.IHKO/H Office e 920-236-5050 ON THE WATER Fax 920 -236 -5084 Temporary Occupancy Permit Application Address for the Requested Temporary Occupancy Permit: c -.- R"d relk A14 Li 'WE Occupancy or Use of Structure: )c*-,/tiry,tiQ' /2 At L- yO i.../ it)z S Building Permit Number: / 7 Issue Date: // /S -07 Applicant Information Name: :‹fly - 74 - 1`.,z-7 -r14._ sel,/ Ll1-Sk_1 ,3 /Aie.4,64 Company Name: / / e, j = S /� .V„0 Add' Mailing Address: _ +���__ _ 1 010 . k... , 1 . Phone Number: 940 - c3 /. — 7 99 Fax Number: ge,20 . psZil 0 1 As (check all that apply) I/ the owner, the General Contractor; the Building Permit Applicant, the agent for the owner, I hereby request approval for a Temporary Occupancy Permit at the aforementioned address. Temporary Occupancy is requested from c '(date) through - /ql -Dg (date.) I agree to abide by any Conditions of Approval. I understand that Final Occupancy Approval or a Temporary Occupancy Permit Extension must be secured by the Temporary Occupancy Permit expiration date or I may be subject to Municipal Citation issuance for each day the structure is occupied without the required Occupancy Permit. C Applicant Signature) (date) (Office Use Only) Application Status Approved _Denied Expiration Date: Fee Collected Comments /Conditions of Approval: 4 y e f c 4- r,, / Ci- v b (1 ker-t) i'r lo � , , p , �""� ( H Dirt n Fob; >r4 4'd -> p //C C.e.7 d'— ` " -17 C!`f t Ot4, /TH LI k ixze - .h. .. ' • al f' _ / 4.3• _ N TAP / cY • �, / I ,,,..c Reviewing Inspector: g p I' ._.�J - Date: / / a0.5 11 , Tom; My initial thoughts on the existing Mezzanine stairs was that they complied with the code from 98 or 99. (1998 is when Arrow Electric built the addition housing the mezzanine, so I gave the benefit of using the oldest code possible in hopes it would be to their advantage.) Researching this, the 7/11 requirements were in effect back then 98 and 99. Therefore, there is no choice but to require the stairs to comply with the 7/11 requirements, and subsequently the present code since they will have to be replaced /rebuilt. If you are able /appropriate, just include in your code review a statement of non - compliance for the guardrails and stairs and this office will follow up with a Notice to Comply. Thanks. Allyn 236 -5045 Dannhoff, Allyn J. From: Lauren Schabloski [moes @northnet.net] Sent: Wednesday, February 13, 2008 1:36 PM To: Dannhoff, Allyn J. Subject: Moe's Marine @ 280 E. Fernau Hello, I am not sure how the process goes, but I wanted to give you an update on how we are doing on the correction notice. We have changed all door knobs in office area to the required lever type. The restroom sign has been installed. Tom Karrells looked at the stamping on the joists under the mezzanine and found them to be rated at 106 lbs. sq. ft. I need to know what kind of sign should be displayed to make the mezzanine compliant. We are also working on plans for an addition to the existing mezzanine at which point the railings will be improved. Please let me know if you have any questions or need to come to the property. Thank you, Lauren Schabloski 1 Dannhoff, Allyn J. From: Dannhoff, Allyn J. Sent: Tuesday, March 11, 2008 1:56 PM To: 'Lauren Schabloski' Subject: RE: 280 E Fernau update Please advise your Contractor/ per state code, regardless of the size of a project, balancing is a requirement. You might also check with the HVAC Designer, I am not sure he will agree with the contractor. Per Comm 64.0313 the system is to be balanced and a report given to the owner to be kept on site. This report then must be made available for review to inspectors upon request. If you review your HVAC Plans, there is usually a note on the plans requiring the Balancing to be performed. Additionally, the HVAC Designer should not be providing the required Compliance Statement until they have verified the balancing has been performed and the system is performing within the design parameters of the code and approved plan. Hope this helps you. Thanks. Allyn Original Message From: Lauren Schabloski (mailto:moes @northnet.net] Sent: Tuesday, March 11, 2008 10:34 AM To: Dannhoff, Allyn J. Subject: 280 E Fernau update Hello, I wanted to follow up with you regarding the Moe's Marine Service project. We still have not received money from the state to put in the fire suppression in the paint booth, so it has not been used yet. Im hoping we will have a check within a week and then schedule the system to be put in place by the end of the month. The machinery has been hooked up and the dust collectors have all of the duct work done. I called my contractor regarding balancing the furnace /AC system and he said that it didn't need to be done because the prop shop is so small and has its own air system. I don't know if that is true so I don't know if this is something that you would have to contact him about. We are waiting for final approval from the city to start construction on our new mezzanine at which time the railings of the existing mezzanine will be improved to code. Please let me know if there is anything I can do to help the process along. Thank you, Lauren Schabloski 1 Dannhoff, AIIyn J. From: Lauren Schabloski [moes @northnet.net] Sent: Friday, March 28, 2008 11:38 AM To: Dannhoff, AIIyn J. Subject: Final Inspection Hello, I was just in the prop shop with the paint booth running and noticed that the entry door to the room is difficult to open because of the suction. I called Fondy Heating and Cooling to come and check it out. They were here last week and did a balance analysis, but at that time the paint booth wasn't being used so I don't think they accounted for it in that analysis. Im sure this is something that has to be dealt with before you do the final inspection. I wanted to let you know of this issue. Hopefully next week we will get it resolved. If you have any more input on this matter please email or call 231 -2799. Thank you, Lauren i f�� INSPECTION SERVICES DIVISION ROOM 205 CITY OF OSHKOSH ( S„ DEPARTMENT OF COMMUNITY DEVELOPMENT 215 CHURCH AVE OSHKOSH CORRECTION NOTICE PO Box 1130 ON THE WATER OSHKOSH WI 54903 -1130 Issue Date 4/3/2008 Compliance Date 5/3/2008 IMMEDIATELY Compliance No Address 280 E FERNAU AVE Name Address City State Zip Code Sent to 4 Owner JAY & PETER SCHABLOSKI /JUNE MAC, 2022 W WIND RD OSHKOSH WI 54901 -0000 u Required for Occupancy Occupancy Industrial Introduction A reinspection revealed the following items to correct as it is related to the addition and remodeling for this building. Item # 1 Code Comm Compliance No Compliance Date 05/03/2008 IMMEDIATELY Description Comm 61.50(4) The Supervising Professionals shall submit Building and HVAC Compliance Statements. 04/03/2008 Last Updated Item # 2 Code State Code Compliance Compliance Date 05/03/2008 IMMEDIATELY Description Information from a registered Architect or Engineer shall be provided advising if any corrections are needed on the existing mezzanine and hat floor loading must be posted on this mezzanine. 04/03/2008 Last Updated Item # 3 Code State Compliance Compliance Date 05/03/2008 IMMEDIATELY Description The stairs, handrails and guardrails for the existing mezzanine are not compliant with the code in effect at the time it was built. They shall be corrected to meet the code at the time the mezzanine was built or the present day code. 04/03/2008 Last Updated 13588 Page 1 of 2 1 INSPECTION SERVICES DIVISION ROOM 205 CITY OF OSHKOSH DEPARTMENT OF COMMUNITY DEVELOPMENT 215 CHURCH AVE OSHKOSH CORRECTION NOTICE PO Box 1130 OSHKOSH WI 54903 -1130 ON THE WATER Issue Date 4/3/2008 Compliance Date 5/3/2008 IMMEDIATELY Compliance No Address 280 E FERNAU AVE Name Address City State Zip Code Sent to u Owner JAY & PETER SCHABLOSKI /JUNE MAC, 2022 W WIND RD OSHKOSH WI 54901 -0000 u Required for Occupancy Occupancy Industrial Introduction A reinspection revealed the following items to correct as it is related to the addition and remodeling for this building. Item # 4 Code Comm 64.0403.1 Compliance No Compliance Date 05/03/2008 IMMEDIATELY Description The repair shop shall be provided with a ventilation system to keep the space reasonably balanced. If the paint booth is provided with its own make up air system supplies air only into the paint booth, no further review is needed. If a Make Up Air system is installed that introduces 04/03/2008 air into the repair shop that is then drawn into the paint booth, then revised HVAC plans -shall be submitted for review and approval. Last Updated Summary Please keep me informed of progress being made to correct these items. Violations must be corrected and approved within 30 days unless otherwise noted. CaII for reinspections prior to concealment and /or occupancy. Upon completing the corrections, the owner /contractor /agent must sign and date at the bottom of this notice and return it to the Inspection Services Division by the Compliance Date of 5/3/2008 Office hours for obtaining permits are Monday through Friday 7:30 -8:30 a.m. and 12:30 -1:30 p.m. or by appointment. To schedule inspections please call the Inspection Request line at 236 -5128 noting the address, permit number (when applicable), and the nature of wh Ati t ds t • e in • ected. Signature ; j Date Inspect. by: lyn Dannhoff 2 045 adannhoff@closhkosh.wi.us I hereby ce ; , e violations listed on this report have been corrected in compliance with the applicable codes. Print Name Company Signature Date Also Sent to: L] Bldg STODOLA -MAAS CONSTRUCTION BOX 1357 FOND DU LAC WI 54936 -1357 11 Elec yJ HVAC FONDY HEATING & AIR CONDITIONING N7374 MOSHER DR FOND DU LAC WI 54937 -0 �f Plbg - J Designer THOMAS R KARRELS 1934 ALGOMA BLVD OSHKOSH WI 54901 -2104 u Other PAUL SOBIECK 2200 S ASHLAND AVE GREEN BAY WI 54304 - u Inspector 13588 Page 2 of 2 4/16/2008 07:14 FAX 920 499 4336 TSI COM SALESIENG el 001/006 Dana 1 of 1 11 11Eg Ri5 1 FAX M MO :_ �(Il'l'lE'l' TEMPERATURE SYSTEMS, INC., GREEN BAY TO: Allyn Dannhoff Date: April 15, 2008 COMPANY: City of Oshkosh- Inspection FROM: Paul Sobieck Temperature Systems Inc FAX NO.: 92 0 - Z36- 5 V 'I 2200 S.Ashland Ave P.O. Box 12088 PAGES: (INCLUDING COVER) Green Bay, WI 54307 -2088 PHONE NO.: (920) 499 -0900 FAX NO.: (920) 499 -4336 SUBJECT: 280 E Fernau Ave Email: psobieck@tsihvac.com 1. \ - I talked to the Manufacturer that supplied the exhaust fan for the paint booth. My understanding after talking to the representative was, that the representative originally quoted a make up air unit, but for some reason the owner did not go with the make up air unit, only the exhaust fan. The representative has quoted the owner again on a dedicated make up air unit for the paint booth. I do not have contact with the owner, so I have no idea what is going on with this system. My contract of the HVAC system did not include the paint booth. The owner informed the HVAC contractor he was taking care of this portion. This is very typical on garages /body shops. A "binks" or other paint booth manufacturer put together a "package" make up air system /exhaust. Done properly (equal amounts of exhaust/make up air) this does not affect our HVAC system. As far as providing floor loads for equipment, I am not qualified to do this calculation. The owner needs to hire a structural engineer. The stairs, handrails and guardrails for the existing mezzanine are to be completed by architect/structural engineer. Please call me with any questions. Paul Sobieck 04/16/2008 07:14 FAX 920 499 4336 TSI COM SALES \ENG a002/006 0 - INSPECTION SERVICES DIVISION ROOM 205 CITY OF OSHKOSH DEPARTMENT OF COMMUNITY DEVELOPMENT 215 CHURCH AVH OSHKOSH CORRECTION NOTICE PO Box 1130 ON THE WATER OSHKOSH WI 54903 -1130 issue Date 4/3/2009 Compliance Data 5/3/2008 IMMEDIATELY Compliance No Address 280 E FERNAU AV E - Name Address City State Zip Code Sent to I--J Owner J JAY & PETER SCHABLOSKUJUNE MAC, 2022 W WIND RD - _— OSHKOSH WI 54901 -0000 u Required for Occupan c Occupancy Industrial ._. _. ...... -. Intr&ductlon reinspection revealed the following items to correct as it is related to the addition and remodeling for this building. Item # 4 _ Code Comm 64.0403.1 Compliance No Compliance Date 05/03/3008_ IMMEDIATELY Description The repair shop shall be provided with a ventilation system to keep the sp ace reasonably balanced. If the paint booth is provided with its own make up air system supplies air only Into the paint booth, no further review is needed. If a Make Up Air system is installed that introduces 04/03/2008 air into the repair shop that is then drawn Into the paint booth, then revised HVAC plans shall be submitted for review and approval. Last Updated Summary, Please keep me informed of progress being made to correct these items. Violations must be corrected and approved within 30 days unless otherwlse noted. Call for reinspections prior to concealment and /or occupancy. Upon completing the corrections, the owner /contractor /agent must sign and date at the bottom of this notice and return It to the Inspection Services Division by the Compliance Date of 5/3/2008 Office hours for obtaining permits are Monday through Friday 7:30 -8:30 a.m. and 12:30 -1:30 p.m. or by appointment: To schedule inspections please c : • e Inspection Request line at 236 -5128 noting the address, permit number (when applicable), and the nature of wh nee.. to be nspe • _ Signature II 1 11 . I Date 1 1/ 4 /19g Inspecte lyn Dannhoff 23 : - 5 adannhoffOci.oshkosh.wi.us I hereby ce . •.. , violations listed on this report have been corrected in compliance with the applicable codes. Print Name Company Signature Date Also Sent to: 0 8 148 STODOLA -MARS CONSTRUCTION BOX 1357 FOND DU LAC WI 54936 -1357 HVAC 1 FONDY HEATING & AIR CONDITIONING N7374 MOSHER DR FOND DU LAC WI 54937 -0 U Plb9 -- u Designer 1 THOMAS R KARRELS 1934 ALGOMA BLVD OSHKOSH WI 54901 -2104 lJ Other I PAUL SOBIECK 2200 S ASHLAND AVE GREEN BAY WI 54304 - In 7 13588 Page 2 of 2 04/16/2008 07:14 FAX 920 499 4336 TSI COM SALES \ENG lj 003/006 INSPECTION SERVICES DIVISION ROOM 205 CITY OF OSHKOSH DEPARTMENT OF COMMUNITY DEVELOPMENT 215 CHURCH AVE OSHKOSH CORRECTION NOTICE PO Box 1130 OSHKOSH WI 54903 -1130 ON THE WATER Issue Date 4/3/2008 Compliance Date 5/3/2008 IMMEDIATELY Compliance No Address 28 E FERNAU AVE Name Address City State Zip Code Sent to U Owner JAY & PETER SCIiABLOSKI /JUNE MAC, 2022 W WIND RD _ - OSHKOSH WI 54901 -0000 U Required for Occupancy J Occupancy Industrial _ - _ —_ Introduction • - — reinspection revealed the following Items to correct as it is related to the addition and remodeling for this building. item # 1 Code Comm Compliance No Compliance Date 05/03/2008 IMMEDIATELY Description m 61.50(4) The Sup.Msing Professlonals shall submit Building and HVAC Compliance Statements. 04/03/2006 Last Updated Item # 2 Code State Code Compliance Compliance Date 05/03/2008 IMMEDIATELY Description Infomlation from a registered Architect or Engineer shall be provided advising if any corrections are needed on the existing mezzanine and what floor loading must be posted On thls mezzanine. 04/03/2008 Last Updated Item # 3 Code State Compliance Compliance Date 05/03/2008 IMMEDIATELY Description stairs, Handrails and guardrails for the existing mezzanine are not compliant with the code in effect at the time It was built They shall be cted to meet the code al the time the mezzanine was built or the present day code. 04/03/2008 Last Updated • 13588 Page 1 of 2 04/16/2008 07:14 FAX 920 499 4336 TSI COM SALES \ENG II004 /006 • Buildings, HVAC, Compliance Statement • This form is required to be submitted by the supervising professional (architect, engineer, HVAC designer or electrical designer) observing construction of projects within buildings with total areas 50,000 cubic feet or greater and bleachers (Comm 50.10 /Cornm 61.50). Failure to submit this form may result in penalties as specified in Comm 50.28/Comm 61.23 and/or local ordinances. General Instructions: Prior to the initial occupancy of new buildings or additions and the final occupancy of altered existing buildings, submit this completed and signed form to: • The municipal building Inspection office and • Safety and Buildings, 10541N Ranch Road Hayward, Wi. 54843 Personal information you provide may be used for secondary purposes [Privacy Law, s. 15.04 (1)(m)i. 1, PROJECT INFORMATION: Please fill in the following with information from your plan approval letter. Transaction ID Number 2 Li- tO7 Fi c07_ 14 Site Number Site location (number 8 street) 2 ili g t- -ph ratty i4 oP,. Cit 0 Village 0 Town of CS j - ) 'cci W} County of (Ai ► .04/4 6C 2. PURPOSE OF THIS STATEMENT: (check Box A, B, C, or D to indicate purpose and complete any other applicable boxes and information. Attach additional pages if necessary.) Check those which appy: 0 Building Object ID # ❑ HVAC Object ID # ❑ lighting Object ID # _ • 0 Partial Completion Description of Portion Completed A) )1/ Statement of Substantial Compliance To the best of my knowledge, belief, and based on onsite observation, construction of the following building and/or HVAC items applicable to this project have been completed in substantial compliance with the approved plans and specifications. 0 BUILDING/UGHTING ITEMS 1. Structural system Including submittal and erection of all buNding components 10. Exterior lighting & control requirements (trusses. precast, metal building. etc.) 11. Interior lighting 5 control requirements 2. Fire protection systems (sprinklers, alarms. smoke detedore) designed, 12. All conditions of lighting plan approval Installed. and tested (Inducing forward sow on back flow devices) by and applicable variances appropriately registered professionals 3. Shaft and stairway enclosure 4. Exits including exit and directional lights 5. Fire - resistive construction, enclosure of hazards, are wags, labeled doors, class HVAC ITEMS of construction, fire stopped penebaiions 6. Sanitation system (toilets. sinks, drink facilities) 1. HVAC System Including final test 7. Bander-free including Comm 18 elevators and ifs 2. All condflons of HVAC plan approval and 8. Energy envelope requirements applicable variances 9. All conditions of building plan approval and applicable variances The following Items are not in compliance and roust be addressed: S7 /i t 1Q DIZ)Ticit CS cf COO Ci ( cS .X> S1 L(PC &' r ryl/P ,e, PAINT i?r ft AA -0 tla AA- B) ❑ Statement of Noncompliance C (14)37 1 j 'try CAJntpt . Due to the following listed violations, this project Is not ready for occupancy: C) 0 Supervising Professional Withdrawn From Project (Use A ore above to indicate project status as of this date.) D) 0 Project Abandoned 3. SUPERVISING PROFESSIONAL Si RE FOR:[[ L f. ❑ Building KHVAC 0 Lighting `' L S4I t ( f �,. Date .,, /1 1t^ )6, Nam le ase p rat or type) Phone number ?? (1 Y9/ Customer ID # l — Signature C9 w.p r ,„,._ (Sig:fr__._____ S732 SBD -9720 (tt_01/2002) 04/16/2008 07:14 FAX 920 499 4336 TSI COM SALES \ENG a 005/006 • City of Oshkosh Division of Inspection Services 215 Church Avenue PO Box 1130 Oshkosh WI 54903 -1130 ' V^ worw.ci.oshkosh.wi QJH<C)J H . ON YNE WATER January 15, 2008 Paul Sobieck Temperature Systems Inc. 2200 South Ashland Ave Green Bay, WI 54304 Lauren Schabloski Moe's Marine 280 E Fernau Ave Oshkosh, WI 54901 Site: Plan Ntunber: Z4-2078-0807-11 Moe's Marine 280 E Fernau Ave. Oshkosh WI 54901 For: Description: Addition Object Type: HVAC only Class of Construction: IRE -1600 Sq Ft.; Unsprinldered Occupancy: S: Storage, B: Business / Office The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes and Wisconsin Statutes. The submittal has been CONDITIONALLY APPROVED. The owner, as defined in Chapter 101.01(10), Wisconsin Statutes, is responsible for compliance with all code requirements Key Item(s) / Conditions: • NOTE: This an review does not include the "Self Contained Paint Booth by Owner ". If the operation of this spray booth results in any air exchange between this HVAC system and that of the spray booth • HVAC plans will b required to be submitted to address this condition. • Comm 6131(4) Revisions to approved plans. All proposed revisions and modifications which involve rules under this code and which are made to construction documents that have previously been granted approval by the department or its authorized representative, shall be submitted to the office that granted the approval. All revisions and modifications to plans shall be approved in writing by the department or its authorized representative prior to the work involved in the revision or modification being carried out. A revision or modification to a plan, drawing or specification shall be signed and sealed in accordance with Comm 6131(1). SUBMIT: • Comm 6130 (4) Supervision. Prior to the initial occupancy of an alteration the supervising professional shall file a compliance statement form SBD -9720 with this office. 1 :.hwpe lionatan Rcvirw nnancytial.Plan Rrvirw ^_00 i7 4I 8 crn�u 0•E Fi Mc 11VA(: nnly.duc ,.a11• Page 1 oft _. '�$t..n _rc O ..rG K .1 efr 04/16/2008 07:14 FAX 920 499 4336 TSI COM SALES\ENG a006/006 • •• A copy of the approved plans, specifications, and this letter shall be on -site during construction. All permits are required to be obtained prior to commencement of work. • In granting this approval the City of Oshkosh Inspection Services Department reserves the right to require changes or additions should conditions arise making them necessary for code compliance. As per state stars 101.12(2), nothing in this review shall relieve the designer of the responsibility for designing a safe building, structure, or component. Inquiries concerning this correspondence may be made to me at the number listed below or the address on this letterhead. Respe '�> rs • oe Building Systems Consultant (920) 236 - 5051 Monday — Friday 7:30 A.M_ to 6:30 A.M and 12:30 AN to 1:30 P.M. bnoe@ci,oshkosh.wi.us cc: Property file Fee Required $ 230.00 Fee Received $ 0.00 Balance Due $ 230.00 • • t:' igkcrions\ n Iteview'tCn,m!Iercial flan Review 2008‘7,4-2078-(07-11 2f41) P. rrrnaur Avr I rvAC• on1y,J •C Page 2 of 2 Page 1 of 1 Dannhoff, AIIyn J. From: Dannhoff, AIIyn J. Sent: Wednesday, November 05, 2008 8:30 AM To: 'moes @northnet.net' Subject: FW: Paint Booth Make Up Air From: Dannhoff, AIIyn 3. Sent: Wednesday, November 05, 2008 8:24 AM To: 'moes @northnet.netl' Subject: Paint Booth Make Up Air Lauren; Can you please update me on any progress being made to comply with the Paint Booth Make Up Air requirement? Also what is the status with the Mezzanine Project (I've not been called to do any final inspections.) Thanks AIIyn 236 -5045 11/5/2008 Page 1 of 1 Dannhoff, AIIyn J. From: Dannhoff, AIIyn J. Sent: Wednesday, November 05, 2008 9:59 AM To: 'Lauren Schabloski' Subject: RE: Paint Booth Make Up Air Thank you. John has been in contact with me in the past and I have not heard from him or you lately so that was the reason for my inquiry. Please make this a priority so we can close the file. I also had contact from a State employee regarding this issue and I believe this person was going to give you some latitude in submitting the extra expense of the make up air system. This would be another reason to get this done (so a change in this decision is not encountered.) Thanks. Allyn From: Lauren Schabloski [mailto:moes @northnet.net] Sent: Wednesday, November 05, 2008 9:20 AM To: Dannhoff, Allyn J. Subject: Re: Paint Booth Make Up Air I will have to follow up with John Anderson - He sent me an email in August to give me an update on his progress at putting a system together but never got back to me about a quote on the air makeup system. The mezzanine hasn't been built yet. Our carpenter went AWOL for a couple months but its looking like he will be here in the next month (when its too cold to work outside). I will contact John right away and give you an update as soon as I hear from him. Thanks, Lauren On Nov 5, 2008, at 8:30 AM, Dannhoff, Allyn J. wrote: From: Dannhoff, Allyn J. Sent: Wednesday, November 05, 2008 8:24 AM To: 'moes((northnet.netl' Subject: Paint Booth Make Up Air Lauren; Can you please update me on any progress being made to comply with the Paint Booth Make Up Air requirement? Also what is the status with the Mezzanine Project (I've not been called to do any final inspections.) Thanks Allyn 236 -5045 11/5/2008 Dannhoff, AIIyn J. From: Dannhoff, AIIyn J. Sent: Monday, April 20, 2009 1:45 PM To: 'Beschta, Judy - DOT' Subject: RE: Moe's Marine and Air Makeup Unit Good Afternoon; Happy to help clarify this issue. The issue revolves around complying with the State of Wisconsin Commercial Building Code. The chapter governing the HVAC requirements requires a building to be balanced: meaning if X amount of air is being exhausted then a method to provide an equivalent amount of tempered make up air must be provided. There are two methods to comply when paint booths are involved: 1. Install a paint booth that has its own independent make up air system (meaning the make up air is introduced directly to the paint booth. 2. Install a paint booth that has exhaust only (meaning it is exhausting air from the building and then incorporate a tempered make up air system into the space from which the paint booth is drawing the exhaust air. Either case results in additional expenditures. I suspect the cost of each method would have been approximately the same. In this case, Moes submitted HVAC plans for and has installed a Paint Booth that did not include a provision to supply its own make up air. The plan examination letter pointed this issue out. Additionally, if memory serves me correctly, the HVAC contractor commenced (and possible substantially completed) the HVAC installation prior to the submittal of HVAC plans. I do not know if this plays into your decision, but I do know I developed the opinion that Moe's made some uninformed decisions about purchasing the present paint booth that might have been avoided if they had been properly educated by their contractor from the start. In short, the aforementioned plan review letter pointing this code issue out was not rendered until HVAC plans had been submitted and said plans were not submitted until after both the building's heating system and paint booth were installed. Having said this, I do not know to what capacity Fondy Heating was involved in the design process or giving direction on the make up air issue. Possibly sound guidance was given and Moe's failed to recognize the implications. Additionally, I do not know what guidance was offered to Moes from the company that sold them the paint booth. Most companies selling paint booths are aware of the code issues. Sorry to be long winded on this, just want to give you as much insight as possible on what I know about the situation. Short answer is yes, compliance with one of the two methods stated previously must be provided. Why have we allowed them to operate in the interim? First I was told this would be addressed promptly, second I developed the opinion Moes did not understand the whole issue and that is partly why the problem was created, thirdly the Heating Contactor did the install before the plans were approved and finally, we are nice guys (and I would imagine I would have to spend a fair amount of time explaining why they could not use their new facility given it would have taken several weeks to comply if everyone would have tried to resolve this when it first was pointed out.) You are getting contacted on this now, because I spoke to John A. about this recently to find out status because he previously indicated he would be getting this moved in the right direction for these folks. Please call me at 920 - 236 -5045 if you have additional questions. 1 Thanks. Allyn Dannhoff Director of Inspection Services Original Message From: Beschta, Judy - DOT [ mailto:Judy.Beschta @dot.wi.gov] Sent: Monday, April 20, 2009 8:53 AM To: Dannhoff, Allyn J. Subject: Moe's Marine and Air Makeup Unit Hello Mr. Dannhoff, I talked with John Anderson of Anderson HVAC this morning regarding Moe's Marine and the City's requirement for an Air Makeup Unit as an addition to their paint booth. I need to know if the Air Makeup Unit is needed because of a flaw in the building design or if it is strictly a requirement of the paint booth as installed; and a necessary component needed for Moe's Marine to operate their business. Your determination of this issue would be most appreciated. Also, if it is an item required by the paint booth, what has allowed them to operate this past several months without it? Thank you, Judy 2 Dannhoff, Allyn J. From: Lauren Schabloski [moes @northnet.net] Sent: Friday, June 27, 2008 10:00 AM To: Dannhoff, Allyn J. Subject: mezzanine update Hello, I wanted to touch base with you regarding the situation with our mezzanine construction. The state is paying for it, however they are requiring us to pay for the entire thing and then will reimburse us for the cost. Unfortunately we do not have the money available to finance the whole project at one time. Rich is planning on building the mezzanine in the back warehouse first. When he finishes that, is it ok if we store some inventory up there if you inspect it? We have a temporary fix to our storage woes by utilizing containers supplied by the state, but we can only keep them until Aug 15th because the city's temporary permit is only valid for 90 days. I am doubting the entire mezzanine will be completed by Aug 15th and without the containers we will again encounter a shortage of storage. I am doing my best to keep moving forward with complying with the City of Oshkosh code requirements (I am still working on the AMU situation) but with the rough summer we've been having and all of the extra costs we've encountered with this whole move it has been difficult. We will get everything taken care of, it will just take some time. I will be on vacation until July 7th. I have to get out of here for a while... Should anything come up that needs immediate attention I can be reached on my cell phone 920 - 203 -7335. Thank you, Lauren 1 City of Oshkosh Division of Inspection Services 215 Church Avenue PO Box 1130 Oshkosh WI 54903 -1130 OJH V^ fH www.ci.oshkosh.wi.us ON THE WATER March 18, 2008 John Peine Peine Design LLC 8023 Currie Ave Wauwatosa, WI 53213 June Mac Adam Moe's Marine Service 3023 Bellaire Ln Oshkosh, WI 54904 Site: Plan Number: A8- 2271 -0208 Moe's Marine 280 E Fernau Ave Oshkosh WI 54901 For: Description: 2 new Mezzanines Object Type: Building only Class of Construction: IIIB - 1218 Sq Ft.; Unsprinklered Occupancy: Sl: Storage , B : Business / Office The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes and Wisconsin Statutes. The submittal has been CONDITIONALLY APPROVED. The owner, as defined in Chapter 101.01(10), Wisconsin Statutes, is responsible for compliance with all code requirements Key Item(s) / Conditions: • Note: A field correction notice was issued on January of this year indicating the stair and mezzanine that is show as existing was built without permits, and did not comply with code. Subsequent research of earlier codes in effect when the stair may have been built revealed that at no time did the code allow for the riser height that exists in this stairway. These plans identify the stairway as being existing and note 12 on sheet A -1 states that "it is assumed that all previous work on the building has been performed under permit and done according to the codes at the time." The outstanding code violations on this structure are required to be corrected. • IBC 906.1 / IFC 906.3 The maximum travel distance allowed to a fire extinguisher is 75 feet. • IBC 1607.7.1 Handrails and guards. Handrail assemblies and guards shall be designed to resist a load of 50 pounds per linear foot (pound per foot) (0.73 k•/m) applied in any direction at the top and to transfer this load through the supports to the structure. The revised plans indicate the connection detail for the guard vertical member to the rim board, however there is not data to show the remaining connections or the capacity to support the required load, or how the load is transferred from the rim board connection into the floor system. The designer is responsible for reviewing all these connections to verify compliance with this code section. Additional calculation may be required upon field inspection. lnapattio,s'.PIan Review,Comme' iai Kan Review 20u$_ -22 -02n1 780 F Fernau Ave Bldg Only.duc Page 1 of 2 • Comm 61.31(4) Revisions to approved plans. All proposed revisions and modifications which involve rules under this code and which are made to construction documents that have previously been granted approval by the department or its authorized representative, shall be submitted to the office that granted the approval. All revisions and modifications to plans shall be approved in writing by the department or its authorized representative prior to the work involved in the revision or modification being carried out. A revision or modification to a plan, drawing or specification shall be signed and sealed in accordance with Comm 61.31(1). SUBMIT: • IBC 1003.2.11 Means of egress illumination is required to be installed per this section. All paths of egress are required to have adequate emergency lighting to meet the performance requirements of IBC 1003.2.11.3. Provide complete emergency lighting plan showing compliance with these requirements prior to installation of emergency lighting system. A copy of the Emergency Illumination Plan Submittal Policy is provided for your reference. • Comm 61.50 (4) Supervision. Prior to the initial occupancy of an alteration the supervising professional shall file a compliance statement form SBD -9720 with this office. A copy of the approved plans, specifications, and this letter shall be on -site during construction. All permits are required to be obtained prior to commencement of work. In granting this approval the City of Oshkosh Inspection Services Department reserves the right to require changes or additions should conditions arise making them necessary for code compliance. As per state stats 101.12(2), nothing in this review shall relieve the designer of the responsibility for designing a safe building, structure, or component. Inquiries concerning this correspondence may be made to me at the number listed below or the address on this letterhead. Respectfull , Brian Noe Building Systems Consultant (920) 236 -5051 Monday — Friday 7:30 A.M. to 8:30 A.M and 12:30 A.M to 1:30 P.M. bnoe @ci.oshkosh.wi.us cc: Property file Fee Required $ 320.00 Fee Received $ 320.00 Balance Due $ 0.00 Reriew Pia)) Re%.'ew 2005 A8-227 i. -0208 280 F Feniau Ave 131(1g fi-ty.,ls;c: Page 2 of 2 City of Oshkosh Division of Inspection Services 2 215 Church Avenue PO Box 1130 Oshkosh WI 54902 -1130 Office 920 -236 -5050 ^ n I " ^ ' Fax 920 - 236 -5084 OJFKOfH ON THE WATER Emergency Illumination Plan Submittal Policy June 6, 2007 Policy The Division of Inspection Services requires an Emergency Illumination Plan to be submitted and approved prior to the Rough Electrical or Rough Building Inspection. This plan must demonstrate compliance with the Emergency Illumination requirements identified in sections 1003.2.11.2 and 1003.2.11.3 (attached) of the International Building Code. This plan must provide the following information: 1. Identify all areas requiring Emergency Illumination per the criteria spelled out in section IBC 1003.2.11.2. 2. Identify the location, make, model and location of the Emergency Luminaries/Fixtures being provided. 3. Indicate the amount of Emergency Illumination being provided for areas required in item 1 above in a point to point manner to demonstrate that the Emergency Illumination System required by IBC section 1003.2.11.3 will perform as required by this section, including compliance with the maximum -to- minimum illumination uniformity ratio of 40:1 requirement. 4. If the Building Plans were required to be signed and sealed by a Wisconsin Registered Architect or Engineer, this Emergency Illumination plan is also required to be reviewed, signed and sealed by the same as this is a Building Code requirement. Reason The State of Wisconsin adopted the International Building Code on July 1, 2002. This code included significant changes to the Emergency Illumination requirements by establishing minimum performance requirements measured in foot - candles. This standard gives broad flexibility in designing an Emergency Illumination System. This Division has found the majority of Emergency Illumination systems are installed significantly deficient of the minimum Emergency Illumination requirements. The lack of a formal Emergency Illumination plan is resulting in confusion, project delays, additional costs and significant alterations being made in order to comply with the code. As a result this office has determined the most effective way to readily achieve compliance and reduce such confusion, delays, alterations and costs, is to require plans to be submitted demonstrating compliance with the Emergency Illumination Standards. Requiring this plan will promote preinstallation planning and design. This office regrets having to implement this policy /procedure. However, similar to submitting Building or HVAC plans for review and approval prior to installation, it promotes development of a compliant design prior to installation, thus minimizing costs associated with non - compliant installations or applications. Additionally, this process may promote more cost efficient designs for Emergency Illumination systems. BUILDINGS, HVAC, COMPLIANCE STATEMENT SBD -9720 This form is required to be submitted by the supervising professional (architect, engineer, HVAC designer or electrical designer) observing construction of projects within buildings with total areas 50,000 cubic feet or greater and bleachers (Comm 61.40). Failure to submit this form may result in penalties as specified in Comm 61.23 and /or local ordinances. This form must be submitted prior to the plan approval expiration date or another submittal may be required. General Instructions: Prior to the initial occupancy of new buildings or additions and the final occupancy of altered existing buildings, submit this completed and signed form to: • The municipal building inspection office (refer to the plan approval letter for agency address) and • Safety and Buildings, 10541N Ranch Road Hayward, WI. 54843 Note: If the review was done by the municipality, the compliance statement goes only to the municipal building inspector. A copy is not needed by Safety & Buildings. Personal information you provide may be used for secondary purposes [Privacy Law, s. 15.04 (1)(m)]. 1. PROJECT INFORMATION: Please fill in the following with information from your plan approval letter. ■ �n-I& Number Z4 - 2078 -08 07 Project Name MO E 5 MA11 N � Site Number Site location (number & street) 2 SO EAST PEW NAU AVE jgt City ❑ Village ❑ Town of 051 -/k0SH County of JA)j 0/46O 2. PURPOSE OF THIS STATEMENT: (Check Box A, B, C, or D to indicate purpose and complete any other applicable boxes and information. Attach additional pages if necessary.) Check those which apply: ❑ Building Object ID # ❑ HVAC Obje , tp. �; - 25 g ❑ Lighting Object ID # FEB 1 1 2010 ❑ Partial Completion Description of Portion Completed CEP'MP )F - t � ,'- t- � � irt�`i` A) S tatement of Substantial Compliance CON1 Mi�'`l'� DE To the best of my knowledge, belief, and based on onsite observation, construction of t 6Mw r]Q61;;t�i��rMtb items applicable to this project have been completed in substantial compliance with the approved plans and specifications. ❑ BUILDING /LIGHTING ITEMS 1. Structural system including submittal and erection of all building components 10. Exterior lighting & control requirements (trusses, precast, metal building, etc.) 11. Interior lighting & control requirements 2. Fire protection systems (sprinklers, alarms, smoke detectors) designed, installed, 12. All conditions of lighting plan approval and tested (including forward flow on back flow devices) by appropriately and applicable variances registered professionals 3. Shaft and stairway enclosure 4. Exits including exit and directional lights 5. Fire - resistive construction, enclosure of hazards, fire walls, labeled doors, class ❑ HVAC ITEMS of construction, fire stopped penetrations 6. Sanitation system (toilets, sinks, drinking facilities) 1. HVAC system including final test 7. Barrier -free including Comm 18 elevators and lifts 2. All conditions of HVAC plan approval and 8. Energy envelope requirements applicable variances 9. All conditions of building plan approval and applicable variances 2XE-- � j The following items are not in compliance and must be addressed: ' 57Z 9 i i.e � L B) ❑ Statement of Noncompliance " f 76 e -, " - 6fr5?' 47 OirwS - ■ Due to the following listed violations, this project is not ready for occupancy: C) ❑ Supervising Professional Withdrawn From Project (Use A or B above to indicate project status as of this date.) D) ❑ Project Abandoned - rwo ' L , i 3. SUPE VISING PROFESSIONAL SIG , RE FOR: ' Tl ` �j / 3 a/j p /� /o B uilding ❑ HVAC ❑ Lighting .,-.4 . .., , .d / - . 4 Date N. me please print or type) Phone number f0 4Z-4470 Customer ID # Signature 4I jr �/ SBD -9720 (R.07/2008) SBD -9720 (R.02/2004) HVAC Permit Work Card Job Address 280 E FERNAU AVE Permit Number 128563 Create Date 01/23/2008 Owner JAY & PETER SCHABLOSKI /JUNE MACAI Contractor FONDY HEATING & AIR CONDITIONING Fuel 11 Gas Oil I✓ Electric 1 1 Solar 1 1 1 Solid Value $6,600.00 System n New Replace n Other Li] Forced Air J Radiant J Steam NC Vent u Electric Li Hot Water Hi Suppl. J Con. Burner Chimney Type 0 Chimney A 0 Chimney B • Direct Vent 0 Not Applicable Use /Nature IND/ Installation of new HVAC system as per plan * AFTER THE FACT PERMITapproved of Work Inspections: Date/Time Inspected 01/08/2008 12:OOAM Type Final Inspector Allyn Dannhoff Date/Time requested: 01/19/2011 02:26 PM Notice Type: Ready Date/Time: Access: Requested By: FONDY HEATING & AIR CONDITIONING Phone Number: not approved 0 Reinspect Fee 0 Fee Waived ❑ Reinspect Fee Paid Date/Time Inspected 04/16/2008 12:OOAM Type Reinspect Inspector Allyn Dannhoff Compliance statements submitted and permit obtained -- spray booth seprate project. Date/Time requested: 01/19/2011 02:26 PM Notice Type: Ready Date/Time: Access: Requested By: FONDY HEATING & AIR CONDITIONING Phone Number: approved 0 Reinspect Fee 0 Fee Waived ❑ Reinspect Fee Paid City of Oshkosh Division of Inspection Services ( 141-- 215 Church Avenue PO Box 1130 Oshkosh WI 54903 -1130 w �' � ^ � ON f THE -1 ww.ci.oshkosh.wi.us W1\ WATER January 15, 2008 Paul Sobieck Temperature Systems Inc. 2200 South Ashland Ave Green Bay, WI 54304 Lauren Schabloski Moe's Marine 280 E Fernau Ave Oshkosh, WI 54901 Site: Plan Number: Z4- 2078 - 0807 -H Moe's Marine 280 E Fernau Ave. Oshkosh WI 54901 For: Description: Addition Object Type: HVAC only Class of Construction: IIIB -1600 Sq Ft.; Unsprinklered Occupancy: S: Storage, B: Business / Office The submittal described above has been reviewed for conformance with applicable Wisconsin Administrative Codes and Wisconsin Statutes. The submittal has been CONDITIONALLY APPROVED. The owner, as defined in Chapter 101.01(10), Wisconsin Statutes, is responsible for compliance with all code requirements Key Item(s) / Conditions: • NOTE: This plan review does not include the "Self Contained Paint Booth by Owner ". If the operation of this spray booth results in any air exchange between this HVAC system and that of the spray booth HVAC plans will b required to be submitted to address this condition. • Comm 61.31(4) Revisions to approved plans. All proposed revisions and modifications which involve rules under this code and which are made to construction documents that have previously been granted approval by the department or its authorized representative, shall be submitted to the office that granted the approval. All revisions and modifications to plans shall be approved in writing by the department or its authorized representative prior to the work involved in the revision or modification being carried out. A revision or modification to a plan, drawing or specification shall be signed and sealed in accordance with Comm 61.31(1). SUBMIT: • Comm 61.50 (4) Supervision. Prior to the initial occupancy of an alteration the supervising professional shall file a compliance statement form SBD -9720 with this office. i ilyispectioris Plan Review Commercial 08m Rerievv 2008.14 -2078- 050 -I1 280 P Feniau Ave 11VAC C)3fiy.d e Page 1 of 2 A copy of the approved plans, specifications, and this letter shall be on -site during construction. All permits are required to be obtained prior to commencement of work. In granting this approval the City of Oshkosh Inspection Services Department reserves the right to require changes or additions should conditions arise making them necessary for code compliance. As per state stats 101.12(2), nothing in this review shall relieve the designer of the responsibility for designing a safe building, structure, or component. Inquiries concerning this correspondence may be made to me at the number listed below or the address on this letterhead. Respe 1 �� . Ale oe Building Systems Consultant (920) 236 -5051 Monday — Friday 7:30 A.M. to 8:30 A.M and 12:30 A.M to 1:30 P.M. bnoe@ci.oshkosh.wi.us cc: Property file Fee Required $ 230.00 Fee Received $ 0.00 Balance Due $ 230.00 Lint. meil ions .P[an Review m : eloal Plan Review 2008q4-20 78 0807 -II 2 80 EI Fernauu Ave I1V'AC Onty. Page 2 of 2 Building Permit Work Card Job Address 280 E FERNAU AVE Permit Number 0139080 Create Date 11/24/2009 Owner MM PROPERTIES OSHKOSH LLC Contractor STARK CONSTRUCTION Category 211 - Alteration Industrial Plan A8- 2271 -0208 Occupany Permit Required Flood Plain No Height Permit Not Required Class of Const: Use /Nature IND/ Construct Mezz as per plan of Work HVAC Contr Plumbing Contr Electric Contr Inspections: Date/Time Inspected Type Final Inspector Brian Noe Request line Date/Time requested: 6/1/2010 11:00 AM Notice Type: Ready Date/Time: 06/01/2010 12:02PM Access: Open 8 - 5 Requested By: Lauren Phone Number: 231 -2799 0 Reinspect Fee 0 Fee Waived ❑ Reinspect Fee Paid Date/Time Inspected 02/02/2010 09:OOAM Type Final Inspector Brian Noe see photos and email to designer Date/Time requested: 1/19/2011 02:35 PM Notice Type: Ready Date/Time: Access: Requested By: STARK CONSTRUCTION Phone Number: not approved 0 Reinspect Fee 0 Fee Waived ❑ Reinspect Fee Paid Date/Time Inspected Type Note Inspector Brian Noe Revised plans with corrections requires and completion statement provided. Date/Time requested: 1/19/2011 02:36 PM Notice Type: Ready Date/Time: Access: Requested By: STARK CONSTRUCTION Phone Number: 0 Reinspect Fee 0 Fee Waived ❑ Reinspect Fee Paid Page 1 of 2 Building Permit Work Card Job Address 280 E FERNAU AVE Permit Number 0139080 Create Date 11/24/2009 Owner MM PROPERTIES OSHKOSH LLC Contractor STARK CONSTRUCTION Category 211 - Alteration Industrial Plan A8- 2271 -0208 Occupany Permit Required Flood Plain No Height Permit Not Required Class of Const: Use /Nature IND/ Construct Mezz as per plan of Work HVAC Contr Plumbing Contr Electric Contr Inspections: Date/Time Inspected 08/10/2010 09:30AM Type Final Inspector Brian Noe Date/Time requested: 1/19/2011 02:39 PM Notice Type: Ready Date/Time: Access: Requested By: STARK CONSTRUCTION Phone Number: approved 0 Reinspect Fee O Fee Waived ❑ Reinspect Fee Paid Page 2 of 2 Electric Permit Work Card Job Address 280 E FERNAU AVE Permit Number 139317 Create Date 12/21/2009 Owner MM PROPERTIES OSHKOSH LLC Contractor KRUEGER ELECTRIC INC Service 0 New 0 Change 0 Temp • N/A Type 0 Overhead 0 Underground • N/A Volts Circuits 1 Luminaires 14 Amps Switches 4 Receptacles Value $5,000.00 Use /Nature COMM / adding switches and light fixtures CK# 23301 approved w /cond. of Work Inspections: Date/Time Inspected 02/02/2010 12:OOAM Type Final Inspector Kevin Benner Did not inspect earlier because the emergency illumination plan was not submitted and we were not sure of the layout and the spray booth installation was in question.Building Inspector requested the installation 2/1/10. / Work space for the panels, em i Iluination shall be on the local lighting circuit & shall match the paths of egress per the building code, clearly ID all circuit breakers, open wiring on a unit heater on the mezz. Called the E.C..he can correct when he completes the egress lighting.11uination shall be on the local lighting circuit & shall match the paths of egress per the building code, clearly ID all circuit breakers, open Date/Time requested: 01/06/2010 08:22 AM Notice Type: Ready Date/Time: 01/06/2010 09:22AM Access: Requested by: KRUEGER ELECTRIC INC - Debbie Phone Number: 788 -7118 not approved 0 Reinspect Fee 0 Fee Wavied ❑ Reinspect Fee Paid Date/Time Inspected 08/09/2010 12:OOAM Type Re Final Inspector Kevin Benner Request from the Building Inspector (confirmation of paint booth exhaust fan components by the building inspector) Date/Time requested: 08/09/2010 09:09 AM Notice Type: Ready Date/Time: 08/09/2010 09:09AM. Access: Requested by: KRUEGER ELECTRIC INC Phone Number: approved w /cond. 0 Reinspect Fee 0 Fee Wavied ❑ Reinspect Fee Paid Noe, Brian From: Noe, Brian Sent: Wednesday, February 03, 2010 2:14 PM To: 'village ©execpc.com' Cc: 'Lauren Schabloski' Subject: Moe's Marine Attachments: 280 E Fernau Ave - Moes Marine - structral issues.doc Good afternoon John, The attached document contains some of the photos from the mezzanine structure located in the back of the building. As we discussed the approval was based on a 2 ply beam, and since the product used in this application is an engineered product, it must be installed per the product approval. Typically single ply members of this depth are not permitted to function as a beam. We would look for documentation that this product can be used in this application as a single ply beam. The photos clearly show potential issues with bearing and connection details at beam splices. These will need to have the appropriate repairs. Please note that these photos are not meant to represent the entire structure, and are not a substitute for actual review and filed observations. I am providing these so you and your structural engineer have an idea what some of the areas of concern are. As we discussed we would allow the existing mezzanine to be posted with the reduced load carrying capacity as long as the basis for this capacity is documented by calculations. The existing stairway, handrails, and guardrails are required to be made compliant. When you have the emergency lighting plan completed please forward a copy for review. If you or your structural engineer have any questions feel free to contact me. 280 E Fernau e - Moes Marine Brion Noe City of Oshkosh Building Systems Consultant 215 Church Ave. P.O. Box 1130 Oshkosh, WI 54903 -1130 Phone (920) 236 -5051 Fax (920) 236 -5084 NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi t1' i ' i' y d � " ...�.,...,_ f ,- < Illt "%w 1 --- ei r r 1 N n t , , ,, ., .. , .,„ a , . , _, ,... 0 tiii. - 1...„_______,, ...../.,,,,,...,_.„ 1 , ....4 , .... 1. 1 1 J. Taken by Inspections Dept. 280 E Fernau Ave - Moes Marine 2 R a g � 0. 't, y ? \ ,, 4 i e 4. 4. a x a ry ..gyp'. �. ". >y s i z^ a � � �" ` * e tc � ., ..., x s • • 1 —.— . __ W._. ' ... _ s : n 280 E Fernau Ave - Moes Marine 3 Taken by Inspections Dept. 44-4.44:.4444444 2.,. . ., 4•44--..,4- ' - ' ,4 '.. 4 ,. „-4 ,4::.,- , .:.,4,„.0t , - 4,4 " , - - ,-;i1T4 2: ' ,.‘,*464':,::'. , ....,, „,,. ,„...„..„ ‘,„, „ , , , ,.. '''''';' 41' ' - ' - '''' t:•-k- 2'1.L.,,,_,!',..',:f0A-.:41,4'444,"'"`,.',,,,' i . „ . ' '.; '2,,',.17-;',-*‘1- „A' i'''' -*':-.','' o . '' ti„ 11 ,,,,,, •ite.!, ., .t'' 7‘ , tii ,- :v- - ,,,,,,, ,, _. 4. .2.....- , -. 0...„..,,,„,;.,,,t,'„2„::,,,,,,,N„ ,,k., ,,,,..;;,:,..,:;,,,7‘, 7,...!,4 '''.:,... - !, 16i,,' '''.."'::„ ';:s-- •" 7 " . ' ' 'S' '- ' ' ' , '' ,..,.....::::....;.:'?..:7`.'''' 41..........-' .t ',,,rip,, - :.,, .,", :'.,,$,•'-,.'.......77-,$-**,,!,.",:$„--„T --• ;$1,,,,,,,,,,,,$,$„..— : _ : .„ 1,,,ki.L:,,i,.,,•,:s.,?,,,, ,,, 14-7. i'.` '''',. ',, ,,,,,,,-:: '. ' -7„.:;..,„,,v,;:ii,r1,7::,,,,:,,,,,,..2,,,:,:::„:,:‘,:.-.,, .'4::42'4,',7'"! ',,-• ' 0 : , ri',°.','. , ' ' ---'' :,si: '''-..!. iipi., ' ', '. I .,' i:t 4": .., . , .. ,„. .................,, . , , .,,,..,. - '' --- _ '''''' -.1' ,\:.., 4 1,0 / , .. ' 144, . ,..:;; ' 1 , , i, ,,,,.. ,,,.•1 ,. „ -,... „ '..47i,,-„, • ', t ..., 1 „,,.. $ ,•:,,,::, ; ...:„...,..,,,, l'Y I ,,, ,i, .,. ..,. .(,.,4.',,, • ‘';:::::” . , • , \ ' 1 ,,.. ',;f„,,,I.,- . „, - 'i.-- ,,k.• ,1-.\ ,vi-' -- ,r 4 . f , $ p k --,-- .... ,...... ,.;'..i ki. Dept. ions by Inspections Taken 4 k .. moes Marine Ave 280 E Fernau 1 -- "Vi (?RTEX � ,: S IZING t the H rsep 4 , ale 7M1 iodel rtd YB th O ----;,..11..,, g ad Yrtl if I th p' O l 8 Phch that beat mast �. ( �. TFdR ROP LE S EAIE6.1 ," e18 N FI.xL , J 00 ie' ' - y U • Prgpauer. Series rY; Y mep iNhen Sl 4ou ply R Cry "carlace ne" 0 Silk 111110011111 ` ir 1 280 E Fernau Ave - Moes Marine 5 Taken by Inspect Dept. John G. Peine, AIA PEINE DESIGN 8023 Currie Avenue Wauwatosa, Wisconsin, 53213 Architects LETTER OF TRANSMITTAL TO: �1T (P' DATE: #7‘ JOB NO. Le! !O �Y ' / e R ROJECT: 4 fA Est PHONE: ( r)( // WE ARE SENDING YOU: O SHOP DRAWINGS 0 PRINTS 0 SAMPLES 0 SPECIFICATIONS O COPY OF LETTER 0 CHANGE ORDER 0 COPIES DATE NO. DESCRIPTION IZAS • 0 FOR APPROVAL 0 APPROVED AS SUBMITTED 0R YOUR USE 0 APPROVED AS NOTED RECEIVE D 0 AS REQUESTED 0 RETURNED FOR CORRECTIONS MAR 1 2010 O FOR REVIEW & COMMENT 0 RETURN COPIES DEPARTMENT OF O FOR BIDS DUE RETURN TO: COMMUNITY DEVELOPMENT INSPECTION SERVICES DIVISION REMARKS 1 • • • COPY TO: SIGNED: MARI u E • ■ PH 414.476.337 E -MAIL village@execpc.com FAX 414.259.9365 John G. Peine, AIA PEINE DESIGN, IIC • 8023 Currie Avenue Wauwatosa, Wisconsin 53213 Architects SAX COVER LETTER DATE: 2 � d PROJECT #: �.M PROJECT: 1'0 /4 A1� EZZN/fL PLEASE DELIVER TO: WiA COMPANY: Z 17 Y Off e f FAX #:: T2 " 2 � o ' 594 TOTAL NUMBER OF PAGES: /19 f JLJE IF YOU DO NOT RECEIVE ALL THE PAGES, CALL (414) 476 -3377 OUR FAX # (414) 259 -9366 NOTES:CDL/ETZ- q G °M PL. /A.1 - FILE: Ff Y - SIGNATURE: ( /1 C720) ,251 ate z RECEIVED MAR 1 2010 DEPARTMENT OF COMMUNITY DEVELOPMENT INSPECTION SERVICES DIVISION ■ • PH: 414•476.3377 E -Mail: village @execoc.com FAX 414.259.9366 John G. Peine, AIA PEINE DESIGN, IIC • 8023 Currie Avenue Wauwatosa, Wisconsin 53213 Architects February 24, 2010 City of Oshkosh, Inspection Services Division 215 Church Avenue PO Box 1130 Oshkosh, WI 54903 -1130 Attn: Brian Noe, Building Systems Consultant RE: Moe's Marine, 280 E. Femau, Oshkosh, WI 54901 Project Number #08990 Plan Number: A8- 2271 -0208 Mr. Noe, In response to our telephone conversation regarding the submittal of the Compliance Statement, lighting and structural documents for Moe's Marine Mezzanine project I an faxing the structural and Compliance Statement. The single 16" microllam edge beams designed for the mezzanine floor structure have been deemed by the manufacturer, as constructed, sufficient(see attached) Guard Railing details related to horizontal stiffness, bearing detail and load carrying capacity of the existing mezzanine has been addressed with my structural engineer (see attached). In addition, the emergency light fixture selection and fixture locations have been addressed by the owner's electrical designer and contractor. (see attached) The outstanding information is the exit path and exit light location drawing which will come to you soon in the US mail. I trust that this will address the issues you raised regarding the project and an occupancy permit or use permit can be issued to the owner. Please contact me should you have any further concerns. Sincerely, ohn G. Peine, AIA, Architect cc. Moes Marine • • PH: 414.476.3377 E -Mail: village@execpc.com FAX 414•259•9366 BUILDINGS, HVAC, COMPLIANCE STATEMENT SBD -9720 This form is required to be submitted by the supervising professional (architect, engineer, HVAC designer or electrical designer) observing construction of projects within buildings with total areas 50,000 cubic feet or greater and bleachers (Comm 61.40). Failure to submit this form may result in penalties as specified in Comm 61.23 and /or local ordinances. This form must be submitted prior to the plan approval expiration date or another submittal may be required. General Instructions: Prior to the initial occupancy of new buildings or additions and the final occupancy of altered existing buildings, submit this completed and signed form to: • The municipal building inspection office (refer to the plan approval letter for agency address) ind • Safety and Buildings, 10541N Ranch Road Hayward, WI. 54843 Note: If the review was done by the municipality, the compliance statement goes only to the municipal building inspector. A copy is not needed by Safety & Buildings. Personal information you provide may be used for secondary purposes [Privacy Law, s. 15.04 (1)(m)]. 1. PROJECT INFORMATION: Please fill in the following with information from your plan approval letter. Trorreactrarrt&Number A8 Project Name_- I / 4 " ,, a — Site Number — _ Site location (number & street) _ 2 RQ - j! NI City ❑ Village ❑ Town of 69* -4511 County of Vs// (, '1= 0 2. PURPOSE OF THIS STATEMENT: (Check Box A, B, C, or D to indicate purpose and complete any other applicable boxes and information. Attach additional pages if necessary.) Check those which apply: 'Building Object ID # _ ` ❑ HVAC Object ID # ❑ Lighting Object ID # ❑ Partial Completion Description of Portion Completed Y V A) Statement of Substantial Compliance To the best of my knowledge, belief, and based on onsite observation, construction of the following building and /or HVAC items applicable to this project have been completed in substantial compliance with the approved plans and specifications. ❑ BUILDING/LIGHTING ITEMS 1. Structural system including submittal and erection of all building components 10. Exterior lighting & control requirements (trusses, precast, metal building, etc.) 11. Interior lighting & control requirements 2. Fire protection systems (sprinklers, alarms, smoke detectors) designed, installed, 12. All conditions of lighting plan approval and tested (including forward flow on back flow devices) by appropriately and applicable variances registered professionals 3. Shaft and stairway enclosure 4. Exits including exit and directional lights 5. Fire - resistive construction, enclosure of hazards, fire walls, labeled doors, dass ❑ HVAC ITEMS of construction, fire stopped penetrations 6. Sanitation system (toilets, sinks, drinking facilities) 1. HVAC system including final test 7. Barrier -free including Comm 18 elevators and lifts 2. All conditions of HVAC plan approval and 8. Energy envelope requirements applicable variances 9. All conditions of building plan approval and applicable variances The following items are not in compliance and must be addressed: B) 0 Statement of Noncompliance Due to the following listed violations, this project is not ready for occupancy: _ C) 0 Supervising Professional Withdrawn From Project (Use A or B above to indicate project status as of this date.) D) 0 Project Abandoned 3. SUPERVISING PROFESSIONAL SIGNATURE FOR: / Building ❑ HVAC ❑ Lighting - JQ t{'4 FE7 f.tE Date •Z / T f Name (please print or type) Phone numberemer ID # j-�- _Signature SBD -9720 (R.07/2008) SBD -9720 (R.02/2004) SCHALK CONSTRUCTION SERVICES RICHARD W. SCHALK, P.E. February 19, 2010 Mr. John Peine, Architect 8023 Currie Avenue Wauwatosa, WI 53213 Re: Building inspection questions for the new mezzanines at Moe's Marine in Oshkosh, WI. Dear Mr. Peine: We reviewed the questions from the local building inspector and inspected the commercial property referenced above on Friday, February 12 along with the contractors, the owner and yourself. The structural issues raised are discussed below. The bearing requirements at each of the new columns has been review, including the one which was the building inspectors concern. I have talked with the local contractor and he will be adding new steel bearing extensions per our discussion. The use of one (1) M.L. beam at the exterior supports of the new mezzanines was addressed by me in a previous document, however, I have discussed this with Mr. Jerad Bankston, an engineer with the manufacturer, Weyerhaeuser. He has agreed with my assessment and has written a letter of approval of this application that I will be forwarding to you. In reviewing my original calculations from 2008, I noted that the mezzanine was designed for a light storage loading of 125 PSF and not 150 PSF as I may have mentioned in our discussions of the new and old mezzanines. If your have any other questions or needs, please contact me at any time. Sincerely, a zwe • Richard W. Schalk, P :X 5t;6,aLtc Eby` BROOKFiELO,. WI s mg r, SCHALK CONSTRUCTION SERVICES RICHARD W. SCHALK, P.E. January 15, 2010 Mr. John Peine 8803 W. Mourning Dove Ct. Wauwatosa, WI 53132 Re: Building inspection of Moe's Marine in Oshkosh, WI. Dear Mr. Peine: We inspected the commercial property referenced above on Thursday, January 14 along with you and your clients. The renovated building has been completed with regard to all of the structural elements per my calculations and your drawings. The remaining concern was the structural capacity of the equipment mezzanine original to the building prior to your clients occupation. This floor level consists of 11 7/8" TJI Pro 130 joists at 16" o/c with 3 /4" plywood decking and bearing wall structural supports below. Per the Trust Joist web site, the available live load capacity as calculated for the maximum spans would be 80 psf. The area of the existing mezzanine should be marked off and labeled for this maximum floor loading. 4E1E1 If your have any other questions or needs, please contact me at any time. Sincerely 4 a ` i f h - ; 1 / �, � ` k ; �, d Richard W. Si `` , P`4CHARD W. SCHALK = E 1' 1 fi ) BROOKFIELD, �Z '' WI 4 'u` L 44 frke5 14( 5 c 5.„ - 74;v5r ci4/4.. X -- c.) /5 r (4-M(/ 7 7 F /a - A/572,t./6 579/2g6 Ay6.--z-z4-4.J/k47-. ,- i. /) c,i7 „,,- /5 -i roii-L. X/ .,”, , .ec Z Ct" - I ; ,' / / Xi 7 ,"1.7 ,2g ) ,3 3 I " 1 ' .5. (..-5 (.• - ' / 4 ''''. Pet- "TLw:f.;7" 27) 45,. 1 6t / k :::. 3 5 g 7 fr r4V p 2 / '' 7) 2 ' i Lb, :'5 y /41 .1-..: Lc ,& ,,.,,, _,..... 35 15,3) /2/ 33 :: V P5F 0+4., ii 0, Z '--":- .2. 4: 4 4 ""Xr:: ,' CZ-Y/6 I 2 - ,35-,t.„ 10 -7 t -/- (1 A (/1, , / Y' 14/14x. O 7. /2../7/45;33+ " 4:33 ki . - 1116 4 1 if20 i 2.. i ,.... LIC 6 'a'-' i'i,i , L i Lt 5 t..6 (i 60 P5ir kl.kk K A-t2.6-4- i L A c 6 46 ik,., ty Northwest Division — Technical Services • FEDERAL WAY EDINA BEAVERTON 720 South 333`' St- Suite 100 4570 W. 77 St -Suite 198 5350 SW 107 - AVE eve Federal Way, WA 98003 Edina, MN 55435 Beaverton, OR 97005 PHONE: (800) 648 -3936 FAX: (253)928 -2896 Technical Support: nwtech.serviceeweverhaeuser.com cy Weye-haeuser Plan Submittal: nwplan .service(cilweverhaeuser.com February 19, 2010 Richard Schalk Schalk Construction Services 1085 Ridgeway Rd Brookfield, WI 53045 RE: Moe's Marine 280 E. Fernau Ave — Oshkosh, WI Detail for using single ply 1 - 3/4" x 16" 1.9E Microllam® LVL Dear Mr. Schalk: This letter is being sent in regards to your request to verify the adequacy of the attached detail you sent me in regards to using a single ply, 1 -3/4" x 16" 1.9E Microllam® LVL, as a beam in the above referenced project. As you mentioned, our general assumptions in TJ -9000 specifiers guide for Microllam® LVL, states that `beams that are 1 -3/4" x 16" and deeper require multiple ply members.' This statement is provided to prevent a very slender (meaning narrow width and very deep) member from being used in situations where the single ply beam is not adequately braced to prevent buckling. Based on the attached detail, it is my belief that the single ply member will be sufficiently braced by the floor sheathing and the nail attaching the 1 -3/4" x 16" 1.9E Microllam® LVL to the bottom flange of the TJI® floor joist. The general rule stated in our specifiers guide can be waived for this situation and a single ply 1 -3/4" x 16" 1.9E Microllam® LVL can be used. Please note that iLevel has not analyzed the beam(s) in this project to verify it structural adequacy in regards to moment, shear, deflection or bearing. The statements above assume that the members have been adequately designed and that there is lateral sup • ort of the beam at all be • locations, Please feel free to contact me directly at 952 - 897 - 8614 if you have any other questions. Sincerely, I Jerad Bankston, P.E. Structural Frame Engineer iLevel by Weyerhaeuser Attachments: Mezzanine Detail dated 2/17/2010 provided by Richard Schalk z ® ®® i � pp wear Immo =ow mini m ow a ° ; 1 . 1 3NIdYIN S,30w § p a N Q 2 e 0 1 33 3 N W r. vc W 0 si 2 J -81 Z a -8 &,-.4 � o r7 ()i °w O? O a w �� cp S 5 0W F— in h co i:325- ~ § F' d ?? W Z_ Z Q N W Y / .t8 • FEB -01 -2010 09:23 From: To:4142599366 P.2 ..41.,-1.3v-4 r•' Jan 291011:00a CED COOPER LIGHTING •- SURE -LIT S' OS 1C111PT10N � ..- -- 10 N a _. — — ` — rise Exit _ - _ — _ The AO Pro Ema np So u _ _ — — 7i r +• IS .. Mel Heeds is the moil OCOm rniCal d i . ) • II rtu. I+ _ LCDedt ��• b . 3�mnm1 iDMnl purpose err Ile • ...—y, ��— - — contemporary design with Doh i corner stykng and doeiror wnhe k u ' rr . to :eleumdfinishenWloshloblond lit' "In. 0.,anti easily wit h arty W.V. The durable. mjeetion mo de& Iherrtbdael c t malarial recede dbtOloratlon due to ii � I sm 4 i Wrndietion and ape. The eon7..ctor • I _ k friendly snap le construeln allows AP S�RIES.EXIT { — _ _, ^ — - -1 mo for ,under5-minute WITH HEADS %V 1;0..0 _ ,,._. Inalella:ion.Th0 energy onlcionl, no a isuim�•� - mairasnonceLEDspro'da . illumination. A AP Saris Estill with Heeds ere 6.I I P e a • r • d eveilob .eIn universal confideralione w ith Z.it PAPAS IONAle and dofeillfecel and have Ovabl C . I ., I universe; mounting capebilhy 1 Ne (ceiling, Wag. orend). exit Lid HYING t i • Dual Vetted* 120121? VAC, 6014i ' high impact, while.' • . Inn rmoplosuc housing • • PC LED. Long if LW limps provide ur fdrm • cidusard illuminMi i • DC. LiiD DC lamps WIDENING INIOnMAT,ON �.. —� � —� I .L'SDr DC _r 1 �� rnudil f.M•Le sowers APiex WF'1 pH —_ I .. 1 - � 1 fl - I•MmdsDC: 5V.5.xW bra _ 1 7 _ O - _. iI 1 — T' - - i_ — Mtandel:ra � IMP C t Ntw& Att.a•rtrt temps P.m* ownsWb we.w is Gid d sa.ea r.. I n. n. a I Iti.nt ( fs•••IA sits w 11VJ eO .er Yin. wb.yiLdsAI LaIrdCMCit.mbraAerY( =rye WV i . o.... a,nn I 1 .mx•.umMw en..rl rP. n'107� cepeclnr. 1 —;--a; — •— • ildS.0.4ess I uaswpmn rwp.OUt o• cnxp -in N. reyP ppw.• lapse.. Na.nits T:.IN+t , tM••• {rxrc {nNN tiff -Wwx• s0.a.sm. rand& neon Schevrontiraeiienel [ 1.1. s 11 k O �— — I Ii •w L.r, I ..12..40 t •, indiC:AOrc raw lull A' ptfe . r.a q.m.1. CPO... ..--- _ .511013 (ues �. 7. Val $.. soma• , Universal swat con be fold 7.501 •q,.p.i war LEO N IM-0 or r mulieured no sing __ __ _ double face n.e.11.M _— As ` Gil con be uiIin i, wall ur and mourned • -••a c" *„ • u 921 Littod. U: Clomp Lo 4lliun Listed. 1.de Safely NFPA 101, CSA CsnilfOC1, • _ _..� -- N COMA _ NFECr A 01 •A, most nine and wATYnOD e wtlrlGS - ant .... Dmnmtu Ovish. r111MC mews. stl.t'y ar 31 writ Nm 1117 'AS I not WSponcer )11.920-7304440 YV»elon.raMOM Fcc974730411S loll RNA 14(04724666 COOPER LIGHTING - SURE- LITES ®' DESCRIPTION S OIUdons The All Pro Series exit ( 0) is the most economical LED exit for general _.■■ Type purpose applications. The e durable, injection molded, thermoplastic material Catalog # resists discoloration due to UV radiation and the energy efficient, low maintenance LED's provide bright illumination. All AP series exits offer Project universal configurations (single and double face) and have universal mounting capability (ceiling, wall, end). Date Comments Prepared by SPECIFICATION FEATURES Electrical - All components including Code Compliance - Dual Voltage Input battery and electronics are - UL 924 Listed 120/277 VAC, 80Hz located inside the exit housing - UL Damp Location Listed - Line- latchin - Snap -out or snap -in chevron g - Life Safety NFPA 101 � " � - Solid -state Voltage directional indicators have - CSA Certified Limited charger full 3/4" stroke - NEC /OSHA - Solid -state Switching - Knockout provided on housing - Most State and Local Codes - Brownout circuit for surface conduit attachment _ - Low Voltage Disconnect - Universal exits can be field Warranty .. - Overload /Short Circuit configured as single face or - Exit: 1 -Year Protection double face - Battery: 5 -Year pro -rata - Test Switch /Power - Snap -fit canopy with captive (Lead Calcium) Indicator Light mounting screws included with all exits Lamp Data AP Housing Construction - Exit can be ceiling, wall, or - AC LED: Long -life LED - All components are injection and mounted lamps provide uniform SERIES molded, color stable, high - Universal J -box mounting diffused illumination impact thermoplastic material pattern - DC: LED DC lamps EXITS WITH - Designer white textured (Brighter in emergency finish standard Battery mode) HEADS - Components are of snap -frt - Sealed Lead Calcium - Heads DC: 6V, 5AW incan- construction to facilitate - Maintenance -free, Long -life descent wedge base lamps under 5- minute installation Full recharge time, 24 hrs. g - Reinforcing ribs throughout to (max.) THERMOPLASTIC EXIT provide maximum strength SELF - POWERED - Molded -in wireways facilitate EMERGENCY WITH internal wire routing and DOUBLE HEADS connections LED LAMPS ORDERING INFORMATION ENERGY DATA 11 I I I I 11 11 1 11 11 11 I Standby Sealed Lead Mode ff Callu ully m Battery charged Battery): LED Exits - Red LED Exits - Family Letbr Colons Heads Accessories ' Input Power: Premium Deep AP7- Self- Powered with LED R. Red DH' Double Heads Praretive Homing 120V = 4.9W Green All Pro Exit/Emergency DG- Premium Deep vs- Pdycarbanoe Vandal Shield: 277V = 4.7W Input Power: with Heads Green Input Current 120V = 3.1W �uar (Max.): 277V = 2.9W Face Options 120V = .07A Input Current Housing Finish 277V = .03A (Max.): G. Universal wit White Power Factor. 120V =.06A 120V = >.59 277V =.02A Battery Voltage 277V =>.64 Power Factor: Lead Calcium - 120 /277V T.H.D.: 120V = ».41 120V = <45% 277V = >.44 277V =<44% T.H.D.: 120V = <49% not ®; t Order separably. 2 Choose polyearbonete vandal ahield desired from seoaeaories cheat. 3 Choose aim of wire guard from eccaworiaa sheet 277V = <53% Charge Mode (Discharged Battery): Sealed Lead Callum Battery Input Power consumption is increased by approximately 2.7 watts in the charge operating mode for red units and 3.4 watts for green units COOIII Lighting Specifications and Dimensions subject to change without notice. ADx023036 wwm000perlIghtIng.corn Consult your representative for additional options and fin Whore . 03/26/2009 2:17:03 PM pp SERIES EXITS WITH HEADS TECHNICAL DATA Lamps the field. The AP Series Exits in order to maintain peak preventing deep battery The AP Series Exits with Heads with Heads can be wall, ceiling, battery capacity and maximize discharge. use energy efficient, long life or end mounted; a rugged, battery life. Solid -state snap -fit, low profile canopy construction recharges the Test Switch /Power Indicator Light LED's to provide uniform dif- p battery following power captive screws is included ry Ilowin a ower A test switch located on the side fuse illumination of the exit with every exit for ceiling and face. The low operating costs failure in accordance with UL of the exit permits the activation 924. of the emergency and zero maintenance end mounting applications. g cY circuit for a requirement makes LED lamps Lens Brownout Circuit complete operational systems the wisest choice for exit signs The brownout circuit on check. The Power Indicator Light today. Emergency exit Lenses for the AP Series Exits All Pro's exits monitors the flow provides visual assurance that with Heads are made from of AC current to the exit the AC power is on. illumination is provided by LED durable impact resistant lamps and the heads employ and activates the emergency Overload and Short Circuit 6V, 5.4W DC incandescent thermoplastic. All exit faces are lighting system when a Protection designed with full 3/4" stroke predetermined reduction of wedge base lamps. snap -out or snap -in chevron AC power occurs. This dip The solid -state overload Housing Construction directional indicators to insure in voltage will cause most monitoring device in the DC maximum visibility and ballasted fixtures to extinguish circuit disconnects the lamp Rugged, durable, injection load from the battery should molded polycarbonate compliance with the latest causing loss of normal lighting codes. even though a total power excessive wattage demands be materials are used throughout failure has not occurred. made and automatically resets the AP Series Exits with Heads. Line Latched when the overload or short All structural components are Solid - State Transfer circuit is removed. This designed with reinforcing ribs All Pro's line- latched electronic g g circuitry makes installation easy The AP Series Exits with Heads overload current protective to add additional rigidity and to incorporates solid -state feature eliminates the need for ri and economical. A labor maximize structural integrity. ty' efficient AC activated load switching which eliminates fuses or circuit breakers for the These materials are impact and switch prevents the lamps from corroded and pitted contacts or DC load. scratch resistant, and they have turning on during installation to mechanical failures associated Sealed Lead Calcium Battery been UV stabilized to resist with relays. The switching discoloration due to age and a non-energized AC circuit. circuit is designed to detect a The fully sealed, long -life, Line - latching eliminates the maintenance free lead calcium ultraviolet radiation. All loss of AC voltage and components are designed to be need for a contractor's return automatically energizes the battery is ideal for emergency of snap -fit construction - no to a job site to connect the lamps using DC power. Upon lighting applications. These mechanical fasteners - to batteries when the building's restoration of AC power, the DC recombinant cycle batteries facilitate installation in under main power is turned on. power will be disconnected and typically provide 8 to 10 years of the charger will automatically life and may be operated in any 5- minutes. Any components Solid - State Charger g y osition. required for installation recharge the battery. re position. Supplied with a 120/277 VAC, Warranty (wirenuts, wire leads, universal voltage regulated solid -state Low Voltage Disconnect metal J -box bracket, etc.) are all charger. Immediately upon When the battery's terminal All Pro products are backed by included with each exit. The restoration of AC current after voltage falls, the low voltage a firm one year warranty universal design of the AP a power failure, the charger circuitry disconnects the against defects in material and Series Exits with Heads enables provides a high charge rate. workmanship. Maintenance lighting load. The disconnect free, long life, sealed lead universal exits to be configured The charge circuit reacts to the 9 g condition of the battery remains in effect until normal calcium batteries carry single face or double face in ry and ry a regulates the charging process utility power is restored, five -year pro -rata warranty. • 23 1/4" [591 mm] • Max. 4 1/2° t-- 6 "[152mm] —f r[114mmi l 1 3 / 4 " l 1 [19mm • F E1IT �� f, r ! [12 10" 1 11 ./ [254mm] 00 3 7/8" [98mm] • 1 . •-- 5 1/8" • 13" [330mm] i 1 2 3/4' [130mm] [70mm] ♦ 3 3/4" [95mm] max. Cella Ughtlng Specifications and Dimensions subject to change without notice. ADX023036 www.moperIghyng,1,.am Sure -Liter • Customer First Center • 1121 Highway 74 South • Peachtree City, OA 30269 • TEL 770.489.4800 • FAX 770.49134801 03/29/2009 2:17:03 PM FI KMANSHI QUALITY, MATERIALS, WORKMANSHIP All materials shall be new and improved by architect. Workmanship and methods shall be first class and by persons qualified in the respective tracks. Appearance and quality shall be uniform throughout the work. The Owner /Contractor shall submit to the field supervising professional for approval, names of all materials and subcontractors he proposes to use in his work. All State and Local code requirements are to be met. Manufacturers recommendations on all methods and materials shall be followed. Members shall be rigid and securely anchored as specified and detailed. Connections shall be adequate to withstand all strains to which they would be normally subjected. Surfaces and joints of all materials fabricated on or off the site into a single article or composition, or into an assembly of units, shall be uniform, true, plumb, level, properly curved or pitched as required and free from defects or blemishes. Shop drawings shall be submitted to each of the following: Owner /Contractor, Field Supervising Professional, and Architect. Shop drawings are to be approved by each. Punch list inspections are to be performed by the Field Supervising Professional, and Architect. SAFETY GENERAL RESPONSIBILITY Subcontractor shall take all reasonable safety precautions with respect to his Work, shall comply with all safety measures initiated by the General Contractor and with all applicable laws, ordinances, rules, regulations and orders of any governmental agency or political subdivision for the safety of persons or property. The Subcontractor shall report immediately to the General Contractor any injury to any of the Subcontractor's employees at the site. The following list of general safety requirements are to be enforced to protect the Owner's, Architects, Engineer's, and General Con personnel from serious injury as well as the Subcontractor's own personnel. These requirements are not intended to replace any other laws or ordinances in effect at the time of execution of this agreement, but shall merely serve as a supplement to those requirements. Barricades: Barricades and adequate signs are required to keep personnel away from hazardous areas such as excavations, overhead work, etc. Temporary Lighting: Construction areas are to be lighted to a level of at least five (5) foot candies. Floor and Roof Openings: Floor and roof openings must be protected with standard guardrails or General Contractor approved adequate covers which are securely fastened. Open -sided Floors, Platforms Etc.: Open -sided floors, platforms, runways, etc., more than six (6) feet above adjacent walking - working surfaces must be equipped with standard guardrails. Wall Openings: Wall openings must be protected by a substantial barrier where the opening is less than three (3) feet above the floor and where there is a drop of more than four (4) feet. Materials Storage: No storage is permitted within six (6) feet of floor or roof openings. Storage of materials must be approved prior to storage, by the General Contractor. Ladders: Ladders must be free of any broken rungs or other defects, must have proper shoes, be used at the proper Pitch, be tied off at the top with suitable strength material and must have siderails extending 36 inches above the landing area. Scaffolds: Standard guardrails and toe boards are required on all scaffolds and platforms more than six (6) feet high. Where scaffolds or platforms span aisles or exits/entrances, suitable protection from falling objects must be provided. Stairways: All stairways whether temporary or permanent must be equipped with railing and handrails. Welding Tanks: Cylinders of oxygen and acetylene both in use and in storage shall be handled in accordance with applicable OSHA safety codes. Guarding of Moving Parts: Moving equipment such as drive belts pulleys, gears, etc., must be properly guarded. Liquified Petroleum Gases: Storage, use and handling of LPG must be in accordance with good safety practice. Flammable Liquids: Storage, use and handling must be in accordance with good safety practice. (9� b g KOM 0 5 s PAVED PARKING LOT @Xlt MEDICATES EXIT Slt>yN ---4 MrDICATES NEZZANMiE EXIT PATHWAY NOTry ELECTRICAL AND LLU MTION DESIGN AND M ISTALLATION IS BEYOtM THE SCOPE OF THESE DOCUMENTS. EXIT PATH LLUMINATIION 18 TO BE PROVDED AND DESIGNED TO NEST THE MSC CODE REQUFRMENTS M MoEvs I MARINE 0- 00 —� O NEW STORAGE O 00 0 1") O It) 0) Z N \ O MEZZANINES N t 00. v r- W V) 00 Q M U- O Z to Z 280 E. FERNAU AVENUE o � < � OSHKOSH, WISCONSIN o z �3 c�`' a 0 Z U Cr INDEX W U) ° N Zo X o O 0 U < A -1 OVERALL FIRST FLOOR PLAN N & TITLE SHEET W1 INDEX � A -1 a ENLARGED FLOOR PLAN o' A -2 MEZZANINE PLANS A -3 BUILDING SECTIONS A-4 MEZZANINE SECTIONS & DETAILS BUILDING INFORMATION Peine THE PROJECT CONSISTS OF TWO NEW WOOD FRAMED PART STORAGE MEZZANINES Design, LLC AND A NEW WOOD STAIRWAY. THE NEW MEZZANINES (B &C) ARE AT THE SAME HEIGHT 8023 Currie Avenue AS THE EXISTING MEZZANINE A AND ARE CONTINUOUS. THE EXISTING STAIR AND Wauwatosa, NEW STAIR PROVIDE TWO MEANS OF EGRESS. THE MEZZANINES AREA IS LESS THAN PH: (414)476 -3377 ONE THIRD OF THE AREAS THEY SERVE. OPEN SIDES HAVE WOOD GUARDRAILS. THE FAX: (414) 259.6Q66 GUARD RAILS ARE DESIGNED AS PER OSHA - THE MEZZANINES ARE NOT OPEN TO PUBLIC ACCESS. ZONED: M -3 GENERAL INDUSTRIAL (NOTE: MAXIMUM EMPLOYEE COUNT REMAINS AT 11) BLDG. TYPE: IIIB NON - SPRINKLED GROUP: BUSINESS GROUP B _ GR OUP: STORAGE S-1 M HAZARD MEZZANINE EXIT DISTANCE LESS THAN 2W-U' MEZZANINE LOAD: LIGHT STORAGE 125 PSF (SEE STRUCTURAL CALCS) 8111Nf EXISTING BUILDING AREA AREA: 9,244 SO FT MOE'S MARINE EXISTING MEZZANINE A AREA: 454 80 FT NEW MEZZANINE B AREA: 833 SO FT 280 M FEaNAU AVENUE NEW MEZZANINE C AREA 352 SO FT 09W06K WUKXWA I NO- 2S1-sm NOTES nor 1. ARhough every effort has been made is chadeng and preparing ny these anddbbesr�erssbte %all camec" must l and on new or existing shKMm. 2. All work on this project is to be by the latest the edition of the codes appppl1icable to local ordkiences. 3. All work shat( be perrorrned in aecordanoe with accepted building practices and industry standards 4. Verity and u6e only wdtten dimensions DO NOT scale or IrIP.aBtlre dimensions directly from the plift 5. All contractors must be rsfponsIt" focal and any damage to "existing" strucdie caused atdlsr directly or indirectly by that trades. 6, Verity all uncertain items with owner, dilder,and(ar architect 7. Amhibd will riot be responsible for exWV or preexisting soil or structural conditions. 8. The archiled shall not be required to rrrike exhaustive or oaninuous on site inspections to Crdr the quality or uantity of work perfomred. g. The ardi lect shall not be responsible for construction means, methods, mdlnfques, sequences, or ppoodures, or for safety precautions and programs In oonnocft with the work and the architect shall not be resporsibls for the contractor's failure to terry out tier work in e000rdwm wilh the contred = 01 r>ta. 10. LIMITATION OF WARRANTY OF /RCMITECTs wORKmRoDucT The archiled and the architects do not warrant or guarantee the accuracy or �ft% of the work0oduct therein beyond reasonable dilinrutalces, omissions or disaependes are found to workllfro drxt the architect shall be prompgy nettled that titre WNW may have the opportunity to fake allege neoassary to resolve them. Failure to pronrrWy Yr and>cx of such conditions shall absolve the of such conditions and shall absolve the archibQ from svr>rhouE for the consequences of such i r 88nt� a or r1 oorwadiC�uon to ==and w orWprodud ar shat'>eoonb the responsiloil' not of the arcNbct t d the parties respossi 'a for fakin(� such action. 11. The financial liability of the arohited shall be Nrrrilsd b tine amount of the contrail. 12. It is assumed Chet all previous worWn time buildn, tare be pertamsd under permit and done woording to phi Codes at tfst dine. ARCHITECT SEAL #A -8195 JOHN G. PEINE JR AIA r_.. ONLY SIGNATURE IN RED INK VALID RECEIVED MAR 1 2010 DEPARTMENT OF COMMUNITY DEVELOPMENT INSPECTION SERVICES DIVISION Breckington Design Ile Wwauke% MINCONM Mchwd Stout 414 - 940-1802 al �I 4' 2 ILI 0 2 a Z Q a Cr. 0 0 IL N rr J J Q cc W 0 JOB NO. 08990 DATE 2/12/08 SHEET NO. Aml OVERALL FIRST FLOOR PLAN 1 / 8 "wl'°' SHOWING MEZZANINES ABOVE NEW WOOD OR STEEL 1 12' dia HANDRAILS al c � RETURN ALL RAILINGS TO WALL (OR 1/2" MAX. SETBACK) HAND RAIL DETAILS NTS 1.5 "od WOOD OR METAL HANDRAIL W/ ,METAL C BRACKETS 4'oc 3 2X10 HDR 5/8" DW FC ON 2X6 I EXISTING STAIR NEW 18ga STEEL COLD ROLLED CHANNELS & REMOVE - ov1AT aim ma a Ro ainTo wwi n a- co o 0 z N O N o Uj d �o O n Z Li J to Ll z o S a w o cn w z o x o 0 w 0 U') N — [,J �; Eli, 0� cc o! Lo z 0 V) C�1 Peine Design LLC 8023 Currie Avenue Wauwatosa, 153213 PH_ (414) 476.3377 FAX (414) 25940398 ouvw MOE'S MARINE M IL ROOM AM" OMOSK W OOOMM 990 -98** N MIFE.L W/ 2X10 FRAMNO & 3/4' T & G PLYWOOD DECK NEW 18ga STEEL COLD I ROLLED CHANNELS & REMOVE EXIST SIDING & GRT8 WELD CONNECTIONS NEW MEZZANINE C PLAN 1/411=11 352SOFT NEW WOW OR STEEL 1 Ya' dka HANDRAILS NEW WOOD OR STEEL 1 V dia HANDRAILS NEW MEZZANINE B PLAN 11411- 11-011 833SQFT EXISTNG SOUTH STAR NOTES EXISTING RISERS 7' -7Y W/ 11'TTI (WITHIN 0.378 DIM IINFORMITY 10 (ALSO 3403.4 EXISTING STAIRWA EXISTING STAIR EX08TNG MEZZANEIE A NOTES , EXISTING RISERS 7' -7Y.' W/ 11' 1 1 A (WITHIN 0.375 DIM UNE:ORMITY 10031.2 (ALSO 3403.4 EXISTING STAIRWAYS) EXIT PATH KEY @Xlt MCATES EXIT SIGN z W/ EMERGENCY LIGHTS —� INDICATES MEZZANINE EXIT PATHWAY ® FINE EXTINGISHER JOB NO. 08990 DATE 2/12/08 SHEET NO. A=2 z a J a U W W z ZI rx Cl 4 z � a m� r � a O W a 3� W LU z ad JOB NO. 08990 DATE 2/12/08 SHEET NO. A=2 HVAC Permit Work Card Job Address 280 E FERNAU AVE Permit Number 144693 Create Date 01/19/2011 Owner MM PROPERTIES OSHKOSH LLC Contractor ANDERSON HVAC LLC Fuel Gas Oil ✓ Electric Solar Solid Value $21,300.00 System n New n Replace n Other Forced Air a Radiant u Steam a NC J Vent Li Electric a Hot Water J Suppl. a Con. Burner Chimney Type 0 Chimney A 0 Chimney B 0 Direct Vent • Not Applicable Use /Nature Install make up air system for paint booth as per plans.approved of Work Inspections: Date/Time Inspected Type Note Inspector Brian Noe approved Numerous inspections were made priro to permit being issued. See plan review correspondence. Compliance Statement recieved on 2/25/11 Date/Time requested: 03/02/2011 08:13 AM Notice Type: Ready Date/Time: Access: Requested By: ANDERSON HVAC LLC Phone Number: 0 Reinspect Fee 0 Fee Waived ❑ Reinspect Fee Paid INSPECTION SERVICES DIVISION ROOM 205 CITY OF OSHKOSH DEPARTMENT OF COMMUNITY DEVELOPMENT 215 CHURCH AVE OSHKOSH CORRECTION NOTICE PO Box 1130 OSHKOSH WI 54903 -1130 ON THE WATER Issue Date 4/3/2008 Compliance Date 8/10/2010 IMMEDIATELY Compliance Yes Address 280 E FERNAU AVE Name Address City State Zip Code Sent to U Owner JAY & PETER SCHABLOSKI /JUNE MAC, 2022 W WIND RD OSHKOSH WI 54901 -0000 u Required for Occupancy Occupancy Industrial Introduction A reinspection revealed the following items to correct as it is related to the addition and remodeling for this building. Item # 4 Code Comm 64.0403.1 Compliance Yes Compliance Date 08/10/2010 IMMEDIATELY Description The repair shop shall be provided with a ventilation system to keep the space reasonably balanced. If the paint booth is 01/19/2011 provided with its own make up air system supplies air only into the paint booth, no further review is needed. If a Make Up Air system is installed that introduces air into the repair shop that is then drawn into the paint booth, then revised HVAC plans Last shall be submitted for review and approval. Updated Summary Please keep me informed of progress being made to correct these items. Violations must be corrected and approved within 30 days unless otherwise noted. Call for reinspections prior to concealment and /or occupancy. Upon completing the corrections, the owner /contractor /agent must sign and date at the bottom of this notice and return it to the Inspection Services Division by the Compliance Date of 8/10/2010 Office hours for obtaining permits are Monday through Friday 7:30 -8:30 a.m. and 12:30 -1:30 p.m. or by appointment. To schedule inspections please call the Inspection Request line at 236 -5128 noting the address, permit number (when applicable), and the nature of what needs to be inspected. Signature Date Inspected by: Allyn Dannhoff 236 -5045 adannhoff @ci.oshkosh.wi.us hereby certify the violations listed on this report have been corrected in compliance with the applicable codes. Print Name Company Signature Date Also Sent to: ✓f Bldg STODOLA -MAAS CONSTRUCTION BOX 1357 FOND DU LAC WI 54936 -1357 J Elec - ✓� HVAC FONDY HEATING & AIR CONDITIONING N7374 MOSHER DR FOND DU LAC WI 54937 -8430 J Plbg - yj Designer THOMAS R KARRELS 1934 ALGOMA BLVD OSHKOSH WI 54901 -2104 U Other PAUL SOBIECK 2200 S ASHLAND AVE GREEN BAY WI 54304 - J Inspector 13588 Page 2 of 2 INSPECTION SERVICES DIVISION ROOM 205 CITY OF OSHKOSH [/ . DEPARTMENT OF COMMUNITY DEVELOPMENT 215 CHURCH AVE OSHKOSH CORRECTION NOTICE PO Box 1130 ON THE WATER OSHKOSH WI 54903 -1130 Issue Date 4/3/2008 Compliance Date 8/10/2010 IMMEDIATELY Compliance Yes Address 280 E FERNAU AVE Name Address City State Zip Code Sent to U Owner JAY & PETER SCHABLOSKI /JUNE MAC, 2022 W WIND RD OSHKOSH WI 54901 -0000 yj Required for Occupancy Occupancy Industrial Introduction A reinspection revealed the following items to correct as it is related to the addition and remodeling for this building. Item # 1 Code Comm Compliance Yes Compliance Date 04/16/2008 IMMEDIATELY Description Comm 61.50(4) The Supervising Professionals shall submit Building and HVAC Compliance Statements. 01/19/2011 Last Updated Item # 2 Code State Code Compliance Yes Compliance Date 08/10/2010 IMMEDIATELY Description Information from a registered Architect or Engineer shall be provided advising if any corrections are needed on the existing 01/19/2011 mezzanine and what floor loading must be posted on this mezzanine. Last Updated Item # 3 Code State Compliance Yes Compliance Date 08/10/2010 IMMEDIATELY Description The stairs, handrails and guardrails for the existing mezzanine are not compliant with the code in effect at the time it was built. 01/19/2011 They shall be corrected to meet the code at the time the mezzanine was built or the present day code. Last Updated 13588 Page 1 of 2 Noe, Brian From: John C. Anderson [tinman003 @ntd.net] Sent: Friday, February 25, 2011 9:52 AM To: Noe, Brian Subject: Moes Marine Compliance statement Attachments: CCEO2252O11_O0OOO.jpg Nil CCE02252011 000.jpg (518 KE Brian, This is a copy of the compliance statement for Moes Marine. Let me know if there is anything else you need. Have a good weekend. John C Anderson Owner ANDERSON HVAC LLC 3454 Jackson St Unit C Oshkosh, Wisconsin 54901 920 - 230 -6963 Shop 920 - 230 -2665 Fax 920 - 410 -8858 Cell NOTICE: This transmittal is a confidential communication or may otherwise be privileged or confidential. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error and that and review, dissemination, distribution or copying of this transmittal, including attachments, is strictly prohibited. If you have received this communication in error, please notify me immediately by reply or by telephone at 920 -410 -8858, and immediately delete this message and all its attachments, if any. Please consider the environment before printing this e -mail. • NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi BUILDINGS, HVAC, COMPLIANCE STATEMENT SBD -9720 This form is required to be submitted by the supervising professional (architect, engineer, HVAC designer or electrical designer) observing construction of projects within buildings with total areas 50,000 cubic feet or greater and bleachers (Comm 61.40). Failure to submit this form may result in penalties as specified in Comm 61.23 and/or local ordinances. This form must be submitted prior to the plan approval expiration date or another submittal may be required. General Instructions: Prior to the initial occupancy of new buildings or additions and the final occupancy of altered existing buildings, submit this completed and signed form to: • The municipal building inspection office (refer to the plan approval letter for agency address) and • Safety and Buildings, 10541N Ranch Road Hayward, WI. 54843 Note: If the review was done by the municipality, the compliance statement goes only to the municipal building inspector. A copy is not needed by Safety & Buildings. Personal information you provide may be used for secondary purposes [Privacy Law, s. 15.04 (1)(m)). 1. PROD T,, (FORMATION• Please fill in the following with information from your plan approval letter. Transa on ID Number Project Name i { - /dr- 6 Site Number Site location (number & street) 9'S') E - FZ 0 r t' , City ❑ Village 0 Town of 001. it County of Vim./ 1 i..), / 2. PURPOSE OF THIS STATEMENT: (Check Box A, B, C, or D to indicate purpose and complete any other applicable boxes and information. Attach additional pages if necessary.) Check those which apply: ❑ Building Object ID # 7 ,XfIVAC Object ID # ❑ Lighting Object ID # ❑ Partial Completion Description of Portion Completed A) X Statement of Substantial Compliance To the best of my knowledge, belief, and based on onsite observation, construction of the following building and/or HVAC items applicable to this project have been completed in substantial compliance with the approved plans and specifications. ❑ BUILDING/UGHTING ITEMS 1. Structural system including submittal and erection of all budding components 10. Exterior lighting & control requirements (trusses, precast, metal building, etc.) 11. interior lighting & control requirements 2. Fire protection systems (sprinklers, alarms, smoke detectors) designed, installed, 12. All conditions of lighting plan approval and tested (including forward f on back flaw devices) by appropriately and applicable variances registered professionals 3. Shaft and stairway enclosure 4. Exits including exit and directional lights 5. Fire - resistive construction, enclosure of hazards, fire walls, labeled doors, lass VAC ITEMS of construction; fire stopped penetrations 6. Sanitation system (toilets, sinks, drinking facilities) 1. HVAC system including final test 7. Barrier -free including Comm 18 elevators and lifts 2. All conditions of HVAC plan approval and 8. Energy envelope requirements applicable variances 9. All conditions of building plan approval and applicable variances RECEIVED The following items are not in compliance and must be addressed: FEB 2 8 2011 B) ❑ Statement of Noncompliance DEPARTMENT OF Due to the following listed violations, this project is not ready for occupancy: COMMUNITY DEVELOPMENT tNSIL•C SERVfCES DIVISION C) ❑ Supervising Professional Withdrawn From Project (Use A or B above to indicate project status as of this date.) D ) ❑ Project Abandoned 3. SUPERVISING PROFESSIONAL ATURE R: 1 ��— /� i 1 0 Buliding HVaC O lighting Date Name (please print or type) Phone number Customer ID • Signature ?es- :;3_- 3 5 SBD -9720 (R.07/2008) SBD -9720 (R.02,2004) HVAC PERMIT APPLICATION Page 1 of 1 Steinike, Sandra From: HVAC PERMIT APPLICATION [ Permit _App_HVAC ©ci.oshkosh.wi.us] Sent: Tuesday, July 07, 2009 4:36 PM To: Steinike, Sandra Subject: HVAC Permit Application HVAC PERMIT APPLICATION Date:7 /7/2009 4:36:02 PM 27 3 Permit Fee Account YES System: Job Address: 280 E. Fernau Ave Oshkosh, Wisconsin 54901 Owner: Moes Marine Contractor: Anderson HVAC LLC Use Category: Commercial Fule: Gas System: New Type: Forced Air Is Chimney Being Lined? No Liner Size: Manufacturer: Chimney Type: Other Heat Loss: As Approved BTU Rate As Per Plan Other: Description of all Install missing Make Up Air system as per plan for the paint booth in work being done: the prop shop. Value (Including labor 21,300.00 and all materials including light fixtures): Master Elelctrician: Scott Zimmer, Zimmer Electric 7/8/2009 Plan Approval Correspondence Detail 1/19/2011 City of Oshkosh App Number: 2733 Date Received: 6/27/2009 Owner Name: MM PROPERTIES OSHKOSH LLC Job Address: 280 E FERNAU AVE Owner Address: 280 E FERNAU AVE App Type: Building Owner City: OSHKOSH WI 54901-1240 Plan Type: Plan Number: 15- 2733 -0609 Submit Name: AUER STEEL 1HVAC for Spray Booth Address: 785 COUNTY RD CB SUITE 200 City: NEENAH WI 54115 - Date Collected: 7/2/2009 Fee Waived ❑ Fee: $280.00 Fee Paid 0 Fee Paid Date: 7/7/2009 Plan Status: 0 Cancelled 0 Approved 0 Not Approved • On Hold Status Date: 1/11/2010 Net Days to Complete Review: Correspondence Item: Date: Type: 1 7/9/2009 Phone CaII CaII to designer requesting ex fan info 2 7/9/2009 Fax fan info from designer 3 7/10/2009 Phone CaII CaII to Fan Manufacture - requesting info on options vs std explosion proof req. 4 7/10/2009 Phone Call Discussion with Randy Dahmen about code requirements for spray booth 5 7/10/2009 Phone CaII CaII to designer - reviewed code issues 6 7/10/2009 Email email of code infor to designer 7 7/13/2009 Phone CaII Call from John Anderson - Contractor - told to forward and route all design info through designer. 8 8/10/2009 Phone CaII Left VM for designer asking status of revised plans 9 11/25/2009 Email email from designer Plan Approval Correspondence Detail 1/19/2011 City of Oshkosh App Number: 2733 Date Received: 6/27/2009 Owner Name: MM PROPERTIES OSHKOSH LLC Job Address: 280 E FERNAU AVE Owner Address: 280 E FERNAU AVE App Type: Building Owner City: OSHKOSH WI 54901-1240 Plan Type: Plan Number: 15- 2733 -0609 Submit Name: AUER STEEL IHVAC for Spray Booth Address: 785 COUNTY RD CB SUITE 200 City: NEENAH WI 54115 - Date Collected: 7/2/2009 Fee Waived Fee: $280.00 Fee Paid 0 Fee Paid Date: 7/7 /2009 Plan Status: 0 Cancelled 0 Approved 0 Not Approved • On Hold Status Date: 1/11/2010 Net Days to Complete Review: Correspondence Item: Date: Type: 10 12/16/2009 Phone Call Discussion with designer — he will send equipment cut sheets for fan, and plan is to extend fire suppresion into duct work. 11 12/16/2009 Email Email with fan info from designer - -- not explosion proof -- call to designer w/ Kevin - left Voice mail 12 1/7/2010 Email email from Tom Harper - Auer Steel - fowarding information on Spray Booth 13 1/11/2010 Email Email response sent. 14 3/29/2010 Phone Call Call to Lauren and Tom 15 3/29/2010 Email semial sent to Tom 16 8/9/2010 Note Inspection on 8/9/10 indicates that model number matches the plans and emails received indicate this model is explosion proof when fan /bearing cover is installed. Noe, Brian From: Lauren Schabloski [MOES ©NORTHNET.NET] Sent: Wednesday, July 28, 2010 8:56 AM To: Noe, Brian Subject: Re: Paint booth final inspection Yes, you should probably give a call before the inspection so I can kick the guys out of the paint booth. Thanks again, Lauren On Jul 28, 2010, at 8:52 AM, Noe, Brian wrote: > Yes, I will put it on the list of inspections to be made. Since I > will be out of the office the rest of this week, it will most likely > be the end of next week before I can get to this inspection. > Do you need for me to call you before we come to make that > inspections? > Brian > Original Message > From: Lauren Schabloski [mailto:MOES @NORTHNET.NET] > Sent: Wednesday, July 28, 2010 8:24 AM > To: Noe, Brian > Subject: Paint booth final inspection > Hello, > Are we ready for a final inspection on the paint booth? Jim > Jungers has been asking if there is anything else that needs to be > done. I sent you the spec sheet a couple weeks ago. If you didn't get > it please let me know. > Thank you, > Lauren OCR � �P. 'Ir.TF 0.3 k 0 - 7 _ 2-4 o B I 2 2.9 E y -_ NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Mounting Arrangements I , A ,, I , A ,� I , A , , 1 [?_I■I_ a w•■■imill ii_I__ 1 Pr 4; Ilir « &. A ci[ „ I O f. �. lip MI i*W411 `AI 0 Horizontal Base Mounted (HBM) Horizontal Ceiling Hung (HCH) Horizontal (HOR) (w /mounting brackets) (w /mounting brackets) (No mounting brackets) E l i 1! .....1 AIRFLOW ' AIRFLOW 1 n - AIRFLOW Vertical Up Floor Mounted (VUI) Vertical Up Ceiling Hung (VUO) Vertical Up (VUN) (w /mounting brackets) (w /mounting brackets) (No mounting brackets) AIRFLOW I � AIRFLOW AIRFLOW MI llr I tl RI Vertical Down Floor Mounted (VDO) Vertical Down Ceiling Hung (VDI) Vertical Down (VDN) (w /mounting brackets) (w /mounting brackets) (No mounting brackets) Model Nomenclature T 24- E 4 -16 Model I TD = Direct Drive TB = Belt Driven Fan Size Propeller Type Z = Fabricated Steel, Fixed Pitch (5- Bladed) E = Die Cast Aluminum, Adjustable Pitch (4- and 8- Bladed) C = Cast Aluminum, Adjustable Pitch (4- and 6- Bladed) No. of Blades Propeller Blade Angle Twin City Bulletin 4830 f N fa-0 1 1Ce/\ Wye k'rC ' IlI1t, 5 Noe, Brian From: Lauren Schabloski [moes @northnet.net] Sent: Friday, July 16, 2010 11:20 AM To: Noe, Brian Subject: Paint booth fix Hello, Jim Jungers is here right now installing the fan /bearing cover. I sure hope this will correct the problem. Thanks, Lauren NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian From: Noe, Brian Sent: Friday, July 10, 2009 1:27 PM To: 'tom.harper @auersteel.com' Subject: Spray Booth Attachments: IMC 502.7 and 510.doc As you requested I have provided the attachment in which I cut and pasted portions of the IMC that are applicable. IMC 502.7 and 510.doc (58 KB; Please note there are additional codes that may be applicable, such as but limited to, International Fire Code, IBC Section 416 - application of Flammable Finishes, Comm 10 Flammable , Combustible and Hazardous Liquids, and NFPA 30. Like most codes these various codes also refer to additional standards. As we discussed you must first determine what materials are being used in the spray booth, and then work through Section 510 to determine if a "Hazardous Exhaust System" is required per 510.2, that will determine how the system is designed and what types of components are required. I will place the plans on hold until we receive additional information and direction from you. If you have any questions or wish to discuss this further feel free to contact me. Brian Noe City of Oshkosh Building Systems Consultant 215 Church Ave. P.O. Box 1130 Oshkosh, WI 54903 -1130 Phone (920) 236 -5051 Fax (920) 236 -5084 © Before you print this email, please consider the environment. NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian From: Lauren Schabloski [moes @northnet.net] Sent: Thursday, July 01, 2010 9:41 AM To: Noe, Brian Subject: Paint booth update Colmet is shipping out a special shaft guard today - I should see it early next week. Once it gets here Jim is going to come and install it himself. This part should be the answer to the problem. Jim has been very cooperative now so putting some pressure on him worked in our favor. Thanks for your help and patience, Lauren NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian From: Jim Jungers Final Process [finalprocess @charter.net] Sent: Wednesday, June 16, 2010 3:45 PM To: Noe, Brian Subject: Fw: Moe's Marine Paint Booth Attachments: Brochure Colmet Fans.pdf Brochure let Fans.pdf (12 Brian, The engineer that I sent the info to at Colmet is on vacation. I just found this out and am working with another person on this. I have attached a brochure on the fans used in spray booths. Does Moe's look like this when you look at it through the filters or from the side of booth? If not please take a pic of it from the side and through filters and send to me. thanks Jim Jungers Final Process Equipment & Supply, LLC 1430 Wolf Drive, West Bend, WI 53090 Phone: 262.338.0003 Fax: 262.338.7773 Cell: 414.861.5461 jim @finalprocessequipment.com www.finalprocessequipment.com NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian From: Lauren Schabloski [moes @northnet.net] Sent: Tuesday, June 01, 2010 2:46 PM To: Noe, Brian Subject: Moe's Paint Booth Hello, I just spoke with Jim Jungers at Final Process and he said you should call him. He thought all of this was resolved in Feb. I called his cell phone 414- 861 -5461 I left him a message and he returned my call. I hope we can get this figured out soon. He also requested that if Oshkosh has any code above and beyond UL or NFPA ( ?) to please send him a copy. His email is finalprocess @charter.net Thank you, Lauren NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Moe's Marine j Page 1 of 2 Noe, Brian From: Tom Harper [tom.harper @auersteel.com] Sent: Thursday, May 06, 2010 11:39 AM To: Noe, Brian Cc: Tom Harper; John C. Anderson Subject: RE: Moe's Marine Brian, I could not open your file tagged spray booth codes. Brian, the fan should have matched the submittal sent to me by the spray booth / fan supplier and installer. I was not aware that it did not match. If the existing exhaust fan was replaced with one matching the specification submitted previously (having enclosed bearing and belt housing) would you approve the state plan? I do not know why the sticker is on the spray booth. The exhaust fan and make -up air unit are interlocked for simultaneous operation. Tom Harper Auer steel From: Noe, Brian [mailto:bnoe @ci.oshkosh.wi.us] Sent: Monday, March 29, 2010 3:29 PM To: Tom Harper Cc: tinman003 @nt.net Subject: Moe's Marine Good Afternoon Tom, The photo below is the view from the duct access panel looking back into the spray booth. Clearly the bearing and belt housing is not completely enclosed. - this does not match the cut sheets provided with the plans that were submitted, and would not comply with code. «Exhaust Fan Photo.pdf» The following attachment contains various section of the IFC and NFPA 33 that apply to spray booth installations The information from Co /-Met and plans indicates that it complies with NFPA 33. «Spray Booth Codes» You should be able to open as a PDF File - let me know if it doesn't work and I will resend in another format What's up with the label on the front of this booth? If you zoom in on this photo you will see the tag that reads "Caution - Exhaust fan must be turned on before turning on cooking appliances" Was this 5/10/2010 Moe's Marine Page 2 of 2 cooking appliance in a former life? «table. pdf» «table Location.pdf» After you have had a chance to review this information please advise how you wish to proceed. Brian Noe City of Oshkosh Building Systems Consultant 215 Church Ave. P.O. Box 1130 Oshkosh, WI 54903 -1130 Phone (920) 236 -5051 Fax (920) 236 -5084 The information in this e -mail is confidential. It is intended solely for the addressee(s); access to anyone else is unauthorized. If this message has been sent to you in error, do not review, disseminate, distribute or copy it. Please reply to the sender that you have received the message in error and then delete it. Thank you for your cooperation. 5/10/2010 Noe, Brian From: Lauren Schabloski [moes @northnet.net] Sent: Monday, April 26, 2010 10:16 AM To: Noe, Brian Subject: Moe's Marine Hello, Just wanted to touch base with you. Has there been any progress with the paint booth issue? Thanks, Lauren NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian From: Noe, Brian Sent: Monday, March 29, 2010 3:29 PM To: 'tom.harper @auersteel.com' Cc: 'tinman003 @nt.net' Subject: Moe's Marine Attachments: Exhaust Fan Photo.pdf; Spray Booth Codes; Lable.pdf; Lable Location.pdf Good Afternoon Tom, The photo below is the view from the duct access panel looking back into the spray booth. Clearly the bearing and belt housing is not completely enclosed. - this does not match the cut sheets provided with the plans that were submitted, and would not comply with code. Exhaust Fan oto.pdf (583 KB The following attachment contains various section of the IFC and NFPA 33 that app /y to spray booth installations The information from Col-Met and plans indicates that it complies with NFPA 33. Spray Booth Codes (2 MB) You should be able to open as a PDF File - let me know if it doesn't work and I will resend in another format What's up with the label on the front of this booth? If you zoom in on this photo you will see the tag that reads "Caution - Exhaust fan must be turned on before turning on cooking appliances" Was this cooking appliance in a former life? io Lable.pdf (583 KB) Lable :ation.pdf (587 I NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi After you have had a chance to review this information p /ease advise how you wish to proceed. Brian Noe City of Oshkosh Building Systems Consultant 215 Church Ave. P.O. Box 1130 Oshkosh, WI 54903 -1130 Phone (920) 236 -5051 Fax (920) 236 -5084 NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian To: Tom Harper; tinman003 @ntd.net Cc: Benner, Kevin Subject: Moe's Marine Attachments: Picture (Metafile); Spray Booth Codes; Picture (Metafile) Good Afternoon Tom, The photo below is the view from the duct access panel looking back into the spray booth. Clearly the bearing and belt housing is not completely enclosed. - this does not match the cut sheets provided with the plans that were submitted, and would not comply with code. NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi The following attachment contains various section of the IFC and NFPA 33 that apply to spray booth installations The information from Co /-Met and plans indicates that it complies with NFPA 33. Spray Booth Codes (2 MB) You shou /d be able to open as a PDF File What's up with the label on the front of this booth? If you zoom in on this photo you will see the tag that reads "Caution - Exhaust fan must be turned on before turning on cooking appliances" Was this cooking appliance in a former life? NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi After you have had a chance to review this information please advise how you wish to proceed Brian Noe City of Oshkosh Building Systems Consultant 215 Church Ave. P.O. Box 1130 Oshkosh, WI 54903 -1130 Phone (920) 236 -5051 Fax (920) 236 -5084 NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian From: Lauren Schabloski [moes @northnet.net] Sent: Wednesday, February 17, 2010 9:32 AM To: Noe, Brian Subject: Re: Paint booth Hello, I just faxed you a "book" of documents pertaining to this issue. I noticed that "permits" were not included in the quote price so I guess that should have been a flag for me to question if they ever took out a permit. I assumed that whomever was installing the booth would have taken out the permit. If I had this to do all over again (knowing what I know now) I wouldn't have trusted anybody to do their job correctly. But that's the name of the game, I guess. The family put the entire task of moving the business solely on me. From getting a fair price from the state for our old property to finding and purchasing new real estate and putting on an addition and moving... I've learned more than I care to know :) Thanks again for helping us with this mess. John referred me to an attorney - I will wait for your recommendation before proceeding. Lauren On Feb 17, 2010, at 8:38 AM, Noe, Brian wrote: > Good Morning > Can you either fax (920) 236 -5084, or email me copies of the sales > invoice for the paint booth, so we can better determine what this > piece of equipment really is. There are a number of questions as to > how this "paint booth" was constructed, and we will be contacting the > manufacture to try and sort out what they have provided you. It will > take a few days for me to find time to work on this, but I will try to > help you sort some of this out. I recognize that much of this is > rather technical in nature and complicated, and appreciate your > cooperation. > Hang in there and we will sort this out. As long as we are making > progress and moving in the direction of making corrections we would > not take any additional enforcement action. > Brian Noe > City of Oshkosh > Building Systems Consultant > 215 Church Ave. P.O. Box 1130 > Oshkosh, WI 54903 -1130 > Phone (920) 236 -5051 > Fax (920) 236 -5084 > Original Message > From: Lauren Schabloski (mailto:moes @northnet.net) > Sent: Tuesday, February 16, 2010 4:20 PM > To: Noe, Brian > Subject: Paint booth > Hello, > John Anderson stopped in today to give me an update on the paint > booth. I am very confused. He said something to the effect that it may > not even be a paint booth, but a fry booth. ? ? ?? I gave him the copies > of invoices from the sale. I never singed a contract with this guy > because I didn't think it was that kind of deal. This whole move has > been an absolute disaster one thing after another. What do we need to NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi > paint our props and meet code? > Stark Construction came in yesterday and rebuilt the stairs that > were in question. They also added boards to the gate and the new > stairway. On Thursday or Friday they will be doing all the handrails. > John Peine is having his engineer get a letter /note from the > manufacturer of the materials stating that the mezzanine as it is > currently built is safe and won't cause S- bending.... I hope that all > works. I have no clue what I'm talking about - just relaying what I've > been hearing. > Please keep me updated - I'm trying my best to get all of these > problems remedied but it is proving to be a very difficult task. • Thanks, > Lauren NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Noe, Brian From: Noe, Brian Sent: Wednesday, February 17, 2010 8:39 AM To: 'Lauren Schabloski' Subject: RE: Paint booth Good Morning Can you either fax (920) 236 -5084, or email me copies of the sales invoice for the paint booth, so we can better determine what this piece of equipment really is. There are a number of questions as to how this "paint booth" was constructed, and we will be contacting the manufacture to try and sort out what they have provided you. It will take a few days for me to find time to work on this, but I will try to help you sort some of this out. I recognize that much of this is rather technical in nature and complicated, and appreciate your cooperation. Hang in there and we will sort this out. As long as we are making progress and moving in the direction of making corrections we would not take any additional enforcement action. Brian Noe City of Oshkosh Building Systems Consultant 215 Church Ave. P.O. Box 1130 Oshkosh, WI 54903 -1130 Phone (920) 236 -5051 Fax (920) 236 -5084 Original Message From: Lauren Schabloski [mailto:moes @northnet.net] Sent: Tuesday, February 16, 2010 4:20 PM To: Noe, Brian Subject: Paint booth Hello, John Anderson stopped in today to give me an update on the paint booth. I am very confused. He said something to the effect that it may not even be a paint booth, but a fry booth. ? ? ?? I gave him the copies of invoices from the sale. I never singed a contract with this guy because I didn't think it was that kind of deal. This whole move has been an absolute disaster one thing after another. What do we need to paint our props and meet code? Stark Construction came in yesterday and rebuilt the stairs that were in question. They also added boards to the gate and the new stairway. On Thursday or Friday they will be doing all the handrails. John Peine is having his engineer get a letter /note from the manufacturer of the materials stating that the mezzanine as it is currently built is safe and won't cause S- bending.... I hope that all works. I have no clue what I'm talking about - just relaying what I've been hearing. Please keep me updated - I'm trying my best to get all of these problems remedied but it is proving to be a very difficult task. Thanks, Lauren NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohi Page 1 of 1 Noe, Brian FEB 16 20111 From: John C. Anderson [tinman003 @ntd.net] C0i Sent: Tuesday, February 16, 2010 8:20 AM To: Noe, Brian Subject: Moes Marine - Jim Jungers info and Col Met info Brian as per our conversation in your office today this is the info on the booth supplier and the manufacturer of the booth. Please let me know what you can find out from them as they are not helping me out. Thank you, John C Anderson Owner ANDERSON HVAC LLC 3454 Jackson St Unit C Oshkosh, Wisconsin 54901 920 -410 -8858 Phone 920 - 230 -2665 Fax NOTICE: This transmittal is a confidential communication or may otherwise be privileged or confidential. If you are not the intended recipient, you are hereby notified that you have received this transmittal in error and that and review, dissemination, distribution or copying of this transmittal, including attachments, is strictly prohibited. If you have received this communication in error, please notify me immediately by reply or by telephone at 920 -410 -8858, and immediately delete this message and all its attachments, if any. SOLD AND INSTALLED BOOTH Jim Jungers Final Process Equipment & Supply 1430 Wolf Drive West Bend, WI 53090 Ph: 262 - 338 -0003 Fax: 262 - 338 -7773 Cell: 414 - 861 -5461 E -mail: fnal..process(a.charter.net BOOTH MANUFACTURER Jo finny Arno(d COL -MET Spray Booths 1635 Innovation Drive Rockwall, TX. 75032 Ph: (888) 452 -6684 Ext 9416 Ph: (972) 772 -1919 Ext 9416 Fax: (972) 772 -1833 E -Mail: johnny @colmetsb.com 2/16/2010 Page 1 of 1 Noe, Brian From: Lee [lee @tkarrels.com) Sent: Monday, February 08, 2010 8:31 AM C_/=4 -lb, ( c To: Noe, Brian Subject: FW: M0727 Moe's Marine Z) cl JO Attachments: SKMBT C25010012914370.pdf Good Morning Brian: Anything new on the attached email I sent earlier? Thanks, Lee 1 , ...., t C t tb Wt54901 P 9E424400 t r 264 Email ( lee(ittkarrels.com ) From: Lee [mailto:lee @tkarrels.com] Sent: Friday, January 29, 2010 2:05 PM To: 'Noe, Brian' Cc: 'Lauren Schabloski'; Tom Karrels (tom @tkarrels.com) Subject: M0727 Moe's Marine Brian: Attached find a correction notice issued by Allyn Dannhoff for Moe's marine back in April of 2008. We would like to issue a compliance statement to satisfy item #1 of the correction notice. In our compliance statement we would check the box "statement of substantial compliance" and list the mezzanine and stairs under the heading "following items are not in compliance and must be addressed" on the form. In a discussion with the building owner, she indicated that she had another design professional (architect) responding to items #2 & #3 of the correction notice that deal with the existing mezzanine and stair problems and that he would take care of these items. She also indicated that item #4 dealing with the HVAC problems had already been corrected. The reason for this email is to get your response if there is going to be any problem with us signing off on this project. Thank you, Lee Rozek Orr tWorix 1.34p < I 1 o W54901 920 2&4O'iMO p r 92044 . Email (]eel tkatrels.com ) 2/8/2010 Page 1 of 2 Noe, Brian From: Tom Harper [tom.harper @auersteel.com] Sent: Thursday, January 14, 2010 7:24 AM To: Noe, Brian Cc: Tom Harper; John C. Anderson Subject: FW: Moe's marine service Attachments: OSHA 1910.107 Cross Draft Booth 100 fpm Rule dx.pdf; Pages from TB fan.pdf Brian, John Anderson of Anderson HVAC went to the spray booth manufacture to get the best possible answers to your questions. Please let me know if you need any additional information after you review this. Tom Harper From: John C. Anderson [mailto:tinman003 @ntd.net]_ Sent: Thursday, January 14, 2010 6:14 AM To: Tom Harper Subject: Fw: Moe's marine service Original Message From: .Jim Jungers Final Process To: John C. Anderson Sent: Wednesday, January 13, 2010 5:15 PM Subject: Fw: Moe's marine service John, Forward this to whom it may concern. If this does not satisfy him I do not know what else to do. Jim Jungers Final Process Equipment & Supply 1430 Wolf Drive West Bend, WI 53090 Ph: 262- 338 -0003 Fax: 262 - 338 -7773 Cell: 414 - 861 -5461 E -mail: finalprocess @charter.net Original Message From: Donnie Montgomery To: Jim Jungers Final Process ; johnny @colmetsb.com Sent: Wednesday, January 13, 2010 1:23 PM Subject: RE: Moe's marine service I am not sure we originally answered that 1st question fully so I am going to re- address the question expanding the answer to include an attachment. Answers follow the questions. I 1. What is the point to the question in item 1 of the email? Are you trying to say this is not a hazardous exhaust? No, we assume that the exhaust plenum, duct, and the area inside the enclosure is a flammable environment o ment. ColMet follows the industry 1/14/2010 Page 2 of 2 standard airflow for crossflow booths which is based on OSHA 1910.107 (see attachment). NFPA 33 and OSHA 1910 copy each other almost verbat /m with the exception of airflow. When calculating airflow we find that 100 FPM through a booth is many times the minimum required CFM to maintain less than 25% of the LEL within the booth. 2. In the 3rd point of the general compliance letter it indicates that there is no UL file number since the fan is AMCA certified. Please provide additional information on this AMCA certification that shows this fan is approved. See attached Tw /n C /t /es fan catalog page 2 for AMCA Certification (seal is also /orated on the fan itself). 3. The 2nd attachment form Col-met dated February 10, 2006 the last sentence says to review the attached UL listing and approval page accompanying this statement along with the current UL file numbers regarding components supplied but not manufactured by Col-Met Spray Booths, Inc. This statement seems to contradict the statement above in item 2. If the additional page referred to in the February 10, 2006 letter was the other attachment then there still needs to be information provided on the fan listing. No intentional contradiction is meant - perhaps we could have explained differently - see the attached fan catalog page 2 for the electrical (motor) UL Listing - this listing is limited to a %tr /cal components since UL does not test for CFM performance (this is covered by AMCA Certification). We do not use this generic UL # since we list the fan specific eictric motor UL number separately on our UL listings page. 4.Is the fan housing non - ferrous? No, the housing is steel; however, the blade is non sparking cast aluminum. 5.Are the shaft and bearings no -arc producing when a failure occurs? Al/ the fans we have available have bearings with steel races and steel ball bearings so technically there could be a spark produced with catastrophic failure; however, the bearings are sealed and would not be exposed to the airstream. 6 How are the hazardous vapors sealed from the non - explosion proof motor? See photo ofBeltDrive TBseries fan in attached fan catalog page 2. 7.How will the installation comply with NEC 500.8 requirements for hazardous location equipment? Fie /d wiring is not covered by the booth manufacturer (Co /Met) - this wou /d be covered by the insta /ling a %trician. the information in this e -mail is confidential. It is intended solely Eor the addressee(s); access to anyone else is unauthorized. Ef this message has been sent to you in error, do not review, iisseminate, distribute or copy it. Please reply to the sender that (ou have received the message in error and then delete it. Thank (ou for your cooperation. 1/14/2010 fic L_ lair gy p" �/'. ' ►' 4:::104::7► ". Regarding your question about Ventilation for ColMet Spray Booths: • NFPA 33 makes no recommendation for air velocity or volume - simply requiring that you maintain less than 25% of the Lower Flammable Limit (LFL) • Per OSHA recommendations, Co met Spray Booths calculates airflow for Crossdraftbooths at width X height X 100 linear feet per minute (FPM) as this is how we interpret the OSHA 1910 code for booths having a directional air flow from one end toi the other (Crossdraft Airflow). We find no specific provisions in OSHA 1910 for booths with a directional airflow from ceiling to floor (i.e. Pit Downdraft & Side Downdraft) so we would defer to 100 FPM minimum average velocity requirement through the intake air opening (intake filtration). Colmet Spray Booths has historically used 25 to 50 linear FPM on a cross section of the airflow (width X length Xi 50 FPM) depending on the type booth (automotive, truck, or industrial) to calculate the airflow in these booths since 100 FPM through the intake opening is often less total CFM than we would recommend. I have attached an excerpt from OSHA 1910 below. �' ,�� ' roam .. III ''" '" ; Iii n a Vi a, aT c _ �_ a vi ..- .0 _Ern 9 I �h \ w' i . � �R � "�' � � � �� � �� � . � w ? � �S7lllYNlr�l�! T iii �� ,a , . tea �� sexed .. , , a � s er•xt pans- sem „ � ii inn �' . sht Kindest regards, Donnie Montgomery VP Sales Col -Met Spray Booths Occupational Safety and Health Standards (excerpt) Regulations (Standards - 29 CFR) Spray finishing using flammable and combustible materials. - 1910.107 1910.107(b)(5) "Dry type overspray collectors - (exhaust air filters)." In conventional dry type spray booths, overspray dry filters or filter rolls, if installed, shall conform to the following: 1910.107(b)(5)(i) The spraying operations exc electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. t:k c , ost Ut sprayirs per ions €r, y conducted ith e sir velocity over the open face of the boo flar th of not less than 60 linear feet per r7� p e or more, depending on the volume of the finishin rnn being appl and its �atsi and expl character Visible gouges or audible alarm or pressure_ activated devices shall be installed to indicate or inure that tip required air velocity is maintained. f=ilter rolls shall be inspected to insure proper reolacement of filter media. 1 • Phone: (888) 452 -6684 • Fax: (972) 772 -1833 • www.colmetsb.com • TD/TB Tubeaxial Fans Twin City Fan & Blower TD and TB Tubeaxial Fans are specifically designed for cost effective, reliable air movement TB Belt Drive . in commercial and light industrial ducted and non - ducted uJ %E' Cast ' ( applications. Direct and belt drive models are available with Aluminum cast aluminum or fabricated steel propellers to meet specific 1.. application .requirements. Propeller Sizes and Performanc • Direct drive sizes 14" to 48" • Belt driven sizes 14" to 60" • Capacities from 1,600 CFM to 82,600 CFM • Static pressures to 1 w.g. t� a I N ': : :A' 1 , '''' Construction Features ,. ;_ � • Cast aluminum or fabricated steel propellers. • Continuously welded, heavy- gauge, corrosion resistant, enamel coated steel housing. • Heavy -gauge steel motor and bearing supports provide maximum strength with minimal resistance to airflow. ...................... • Flanged housings with prepunched mounting holes can easily be connected to ductwork. • Dynamically balanced propellers for quiet, vibration -free ,, „, ,;;,:: fds;p■-: ‘ , `''''''''''' , , ' .17.1i,:,,,,4!,:,,,I,T,,,,,,,,,,,,,,,, operation. • Designed for continuous duty. • Available with a wide variety of ODP, TEFC and explosion proof ball bearing motors. r �p • Extended lube lines are standard on Model 113 fans. ea , „ All models are UVcUL 705 listed, C US for electrical, File No. E158680. AMCA Twin City Fan & Blower, a Twin CERTIf1ED City Fan Company, certifies that TD Direct Drive MATINS the TO and TB Tubeaxial Fans iu /E' Cast shown herein are licensed to bear Alunairzurn SOURD the AMCA Seal. The ratings shown Propeller D i are based on tests and proce- ° """" dures performed in accordance AIR with AMCA Publication 211 and morEmE"r niroc "rion` i th the A MCA Certifi Ratings Program. ©2006 Twin City Fan Companies, Ltd. All rights reserved throughout the world. Bulletin illustrations cover the general appearance of Twin City Fan & Blower product a t the time of publication and we reserve the r ight to make changes in de and construction at an y time without notice. 2 Twin City Bulletin 4830 Page 1 of 3 Noe, Brian From: Noe, Brian Sent: Monday, January 11, 2010 2:38 PM To: 'Tom Harper' Cc: 'tinman003 @ntd.net' Subject: RE: Moe's marine service Good afternoon Tom, Reviewing the documents you provided I have a number of questions: 1. What is the point to the question in item 1 of the email? Are you trying to say this is not a hazardous exhaust? 2. In the 3rd point of the general compliance letter it indicates that there is no UL file number since the fan is AMCA certified. Please provide additional information on this AMCA certification that shows this fan is approved. 3. The 2nd attachment form Col -met dated February 10, 2006 the last sentence says to review the attached UL listing and approval page accompanying this statement along with the current UL file numbers regarding components supplied but not manufactured by Col -Met Spray Booths, Inc. This statement seems to contradict the statement above in item 2. If the additional page referred to in the February 10, 2006 letter was the other attachment then there still needs to be information provided on the fan listing. 4.1s the fan housing non - ferrous? 5.Are the shaft and bearings no -arc producing when a failure occurs? 6 How are the hazardous vapors sealed from the non - explosion proof motor? 7.How will the installation comply with NEC 500.8 requirements for hazardous location equipment? Please provide this information so we can complete this plan review. Brion Noe City of Oshkosh Building Systems Consultant 215 Church Ave. P.O. Box 1130 Oshkosh, WI 54903 -1130 Phone (920) 236 -5051 Fax (920) 236 -5084 From: Tom Harper [mailto:tom.harper @auersteel.com] Sent: Thursday, January 07, 2010 2:42 PM To: Noe, Brian Cc: Tom Harper; John C. Anderson Subject: FW: Moe's marine service Brian, Please review the attached documents from the spray booth manufacturer and see if it meets your requirements. I will have John Anderson increase both the exhaust fan and make -up air unit to the designed 5,600 CFM. Thanks, 1/11/2010 Page 2 of 3 Tom Harper Ph 1- 888 - 203 -3445 From: John C. Anderson [mailto:tinman003 @ntd.net] Sent: Thursday, January 07, 2010 2:08 PM To: Tom Harper Subject: Fw: Job Number 24913 / EIB- 0807 -14 -SB Tom this is what I recieved from the manufacturer today... Original Message From: Johnny Arnold To: John C. Anderson Sent: Thursday, January 07, 2010 1:17 PM Subject: RE: Job Number 24913 / EIB- 0807 -14 -SB Johnny, I am contacting you with a few questions conceming Moes Marine here in Oshkosh Wisconsin. We are having a hard time with our local inspector, my engineer has a few questions I hope you can answer. Thank you for your time. If you would like to talk to my - engineer his name is Tom Harper with Auer Steel company, the number is 1800 - 236 -4822 1) Does the designer of the spray booth have calculations to prove the ventilation is adequate to prevent the accumulation of vapor -air mixture in concentrations over one - fourth of the lower flammable limit (5,600 CFM of exhaust as shown on the attached drawing)? We calculate our cross flow booths at 100 FPM. (8 width x 7 height = 56 - - - 56 x 100 FPM = 5,600 CFM through filters) (Can not calculate below 100 FPM) 2) What about 4,700 CFM as that is the actual CFM of exhaust fan is moving? See Above 3) Does the designer have a UL rating /listing that the fan supplied can be used in this spray booth application? See Attached 4) Is Final process willing to talk to Brian Noe? Final Process Equipment (Jim Jungers) is an Col -Met Spray Booth Distributor and will be able to assist with any of his or Col -Mets project at all aspects. Thank you, Johnny Arnold John C Anderson Owner ANDERSON HVAC LLC 3454 Jackson St Unit C Oshkosh, Wisconsin 54901 920 -410 -8858 Phone 920- 230 -2665 Fax The information in this e-mail is confidential. It is intended solely for the addressee(s); access to anyone else is unauthorized. If this message has been sent to you in error, do not review, disseminate, distribute or copy it. Please reply to the sender that you have received the message in error and then delete it. Thank 1/11/2010 Page 3 of 3 you for your cooperation. 1/11/2010 ,.. _ _ _ _ . I _________ _ I i -- - I I L , _______ r t 1 , _ t 1 ! 1 , 1 1 1 r ,- ty f . I i 1 ..n - , . 1 \ \ r N...can... j..4) o'NAD-j■ \ t, --- - 5 - ril. fr) ••= .4..-7"45- '*".% V •3 Z '7 1o( ■ N.P c:IN %,, gvj ...„ ; f _____ •-•''''...... 1 I 1 Page 1 of 2 Noe, Brian From: Tom Harper [tom.harper ©auersteel.com] Sent: Thursday, January 07, 2010 2:42 PM To: Noe, Brian Cc: Tom Harper; John C. Anderson Subject: FW: Moe's marine service Attachments: UL Listings updated 09 23 2005.doc; Compliance Letter.doc Brian, Please review the attached documents from the spray booth manufacturer and see if it meets your requirements. 1 will have John Anderson increase both the exhaust fan and make -up air unit to the designed 5,600 CFM. Thanks, Tom Harper Ph 1- 888 - 203 -3445 From: John C. Anderson [mailto:tinman003 @ntd.net] Sent: Thursday, January 07, 2010 2:08 PM To: Tom Harper Subject: Fw: Job Number 24913 / EIB- 0807 -14 -SB Tom this is what I recieved from the manufacturer today... Original Message From: Johnny Arnold To: John C. Anderson Sent: Thursday, January 07, 2010 1:17 PM Subject: RE: Job Number 24913 / EIB- 0807 -14 -SB Johnny, I am contacting you with a few questions conceming Moes Marine here in Oshkosh Wisconsin. We are having a hard time with our local inspector, my engineer has a few questions I hope you can answer. Thank you for your time. If you would like to talk to my engineer his name is Tom Harper with Auer Steel company, the number is 1800 - 236 -4822 1) Does the designer of the spray booth have calculations to prove the ventilation is adequate to prevent the accumulation of vapor -air mixture in concentrations over one - fourth of the lower flammable limit (5,600 CFM of exhaust as shown on the attached drawing)? We calculate our cross flow booths at 100 FPM. (8 width x 7 height = 56 - - - 56 x 100 FPM = 5,600 CFM through filters) (Can not calculate below 100 FPM) 2) What about 4,700 CFM as that is the actual CFM of exhaust fan is moving? See Above 3) Does the designer have a UL rating /listing that the fan supplied can be used in this spray booth application? See Attached 4) Is Final process willing to talk to Brian Noe? Final Process Equipment (Jim Jungers) is an Col -Met Spray Booth Distributor and will be able to assist with any of his or Col -Mets project at all aspects. Thank you, 1/11/2010 Page 2 of 2 Johnny Arnold John C Anderson Owner ANDERSON HVAC LLC 3454 Jackson St Unit C Oshkosh, Wisconsin 54901 920 - 410 -8858 Phone 920 - 230 -2665 Fax The information in this e-mail is confidential. It is intended solely for the addressee(s); access to anyone else is unauthorized. If this message has been sent to you in error, do not review, disseminate, distribute or copy it. Please reply to the sender that you have received the message in error and then delete it. Thank you for your cooperation. 1/11/2010 N L laffr General Letter of Compliance All Col-Met Spray Booths meet or exceed the requirements of the National Fire Protection Association (NFPA) Chapter 33 dated 2005 Standard for Spray Application Using Flammable or Combustible Materials, Occupational Health and Safety Administration (OSHA) CFR 29.1910.107, and the Uniform Fire Code (UFC) Article 45, Special Processes, Application of Flammable or Combustible Materials. Please note that most Col -Met Spray Booths will ship unassembled and therefore the installation, wiring, and the fire suppression system required for the booth but not provided by Col - Met must also comply with these codes. Listings, Certification, and Approvals on Col -Met Spray Booth Components: V Motor: Manufactured by Leeson. General Duty A.C., ODP type enclosure. Motor is mounted outside of the airflow. UL file numbers: E57948, GUIDE# PRGY2, additionally the insulation systems incorporated are covered by Listing: E55555, GUIDE# OBJY2. ' Fan: Manufactured by Twin Cities Fan Co., Inc. Manufactured in accordance to AMCA specifications. Fan is tube -axial type and equipped with non - sparking, non - ferrous aluminum blade. No UL file number is available: fans are AMCA certified. V Light Fixture (open): Manufactured by Visioneering is a fluorescent fixture 120/277 volt. Light is mounted on the exterior of the Spray Booth and sealed with tempered safety glass. UL file number: E74660 V Light Fixture (Class I Div. II): Manufactured by Visioneering is a fluorescent fixture 120/277 volt. Light is mounted on the exterior of the Spray Booth and sealed with tempered safety glass. ETL control number: 2002465 Tempered Safety Glass: Various Manufacturers, Glass is fully tempered clear glass manufactured and tempered to meet the requirements of ANSI Z97.1 Standard and Federal Standard CPSC 16 CFR 1201. Meets NFPA 33 requirements. ?ei^ Exhaust Filters: Manufactured by Airflow Technologies is a paint arrestor filter rated at 99% efficiency for removal of paint over - spray. UL file number: R5628. Caulking: Manufactured by DAP. Materials are non - hazardous and non - flammable. Meets ASTMC- 838 specifications. -V Limit switch: Manufactured by Square D. Limit switch is rated for 15 amps 120 volt. UL file number: E42259. Air Solenoid Valve: Manufactured by Goyen. Valve operates on 120 volt A.C. power. Valve is normally closed one way. UL File number: MH9011 Manometer Draft Gage: Manufactured by Dwyer Instruments to meet NFPA 33 requirements. v/ Galvanized Steel: Various Manufacturers, 18 -gauge Prime G -90 lock forming quality-mill flat. Meets ASTM -A653 specifications. Steel is galvanized in the hot - dipped process with a zinc coating. Meets NFPA 33 requirements. Donnie Montgomery Director of Operations Col-Met Spray Booths • Phone: (888) 452 -6684 • Fax: (972) 772 -1833 • www.colmetsb.com • 1 L:- ■ i- t#7 To All Whom It May Concern February 10, 2006 All Col -Met Spray Booths are designed to meet or exceed the requirements and recommendations of the National Fire Protection Association (NFPA), Standard Number 33, as well as the Occupational Health and Safety Administration (OSHA) CFR 29.1910.107 covering the operation and construction of spray booths. Please review the attached UL Listing and Approval page accompanying this statement along with the current UL file numbers regarding components supplied but not manufactured by Col -Met Spray Booths, Inc. Sincerely, Donnie Montgomery Donnie Montgomery Director of Operations Col-Met Spray Booths, Inc. 1635 Innovation Drive Rockwall, TX 75032 Phone: 888 - 452 -6684 Fax: 972- 772 -1833 www.colmetsb.com robbiePcolmetsb.com 1635 Innov ation Dr. • Rockwall, TX 75032 • Phone: 888.452.6684 • Fax: 972.772 -1833 • www.colmetsb.com Page 1 of 1 Noe, Brian From: Tom Harper [tom.harper @auersteel.com] Sent: Wednesday, December 16, 2009 11:23 AM To: Noe, Brian Cc: John C. Anderson; Tom Harper Subject: FW: MOE'S MARINE SERVICE Attachments: 4451_001 . pdf Brian, Attached you will find a cut sheet on the spray booth exhaust fan we spoke of earlier today. John from Anderson HVAC will be ordering this fan ASAP after you are done with the plan review. Please let me know if you have any other concerns on this project. If you have any questions please feel free to call me at 1- 888 - 203 -3445. Thanks, Tom Harper Auer Steel The information in this e -mail is confidential. It is intended solely for the addressee(s); access to anyone else is unauthorized. I f this message has been sent to you in error, do not review, disseminate, distribute or copy it. Please reply to the sender that you have received the message in error and then delete it. Thank you for your cooperation. 12/16/2009 >K = ----.4 o -- fit �. I , e I j ! t! t • 1 Af. �� / Ts. $i QnM VI 's Ig 11 L r, .., _ »�' let r vr ap ..., gnp. Si > i 0 h c r _ 1 • M' I a h LJ i 1 g �i w p ny � a i 111 fy .F M it a IP 41 1 J 1 o h p 2 O q� �p M r N '� 1'1 ip Q1 W �� ^��� i- 1 N N !M t+i N tY �Il Al Y: tc: 5 1 . g g I :: g . 1/i j 9$ d dd d ili 11 1NNh11 400nNwel ikil 1 R 7 A m N a= 111 V S S l s 6 8 n N tv N r� n •e .e a> > d it It) 2Y5 V °°'°mlommmm i • J eeeNNep�1NM.Re.pi� a '' g E et d � 00 000000000 !lei' g ill) t Q dnV41.1 1 4 r� 22 Weil W R 1 . 3*- i ' le 1 .NN,gn�� � a dd 11 $ E. i / n . 1 1 Ai l m 10 al.wItg44111;2 iitifPlgi mr1 r�111M Qh AN�ry td 1001 -�^ i �+LI� W �- N N N Z i i Z5 p 1 N S O W _ v ,_ X 5 — 1- g♦ d LA* ZACT.E158680 - Ventilators, Power Page 1 of 2 ONLINE CERTIFICATIONS DIRECTORY ZACT.E158680 Ventilators, Power Paoe Bottom Ventilators, Power See General Information for Ventilators. Power TWIN CITY FAN COMPANIES LTD E158680 5959 TRENTON LN MINNEAPOLIS, MN 55442 USA Power ventilators, duct mounted tubeaxial, belt drives, Models TB, ETABD followed by number 14, 16, 18, 21, 24, 30, 36, 42, 48, 54 or 60, followed by letter C, E or Z, followed by number 3, 4, 5, 6 or 8, followed by a one or two digit number. Product ventilators, duct mounted square inline, belt drives, Models BSI, SCBD followed by number 080, 090, 100, 120, 135, 150, 165, 180, 210, 225, 245, 270, 300, 330, 365 or 402 may be followed by HP. Power ventilators, duct mounted square inline, direct drive, Models DSI, followed by 080, 090, 100, 120, 135/135 N, 150 /150 N, 165/165 N. Power ventilators, duct mounted tubeaxial, direct drives Models TD, ETA followed by number 14, 16, 18, 21, 24, 30, 36, 42, 48, followed by letter E, followed by number 4 or 8, followed by a one or two digit number. Power ventilators, duct or roof mounted mixed flow, belt drives, Models QSL or AMX and QFE or AMXFE, , followed by 150, 165, 182, 200, 222, 245, 270, 300, 330, 365, 402, 445, 490, 542, 600, 660 or 730. Power ventilators, duct or roof mounted, Light Duty Tubular Centrifugal Mixed Flow, Belt Drive , Models QCLB or ACLB, followed by 90, 122, 135, 150, 165,. 182, 200, 222, 245, 270, 300, 330, 365, 402, 445, 490, 542 or 600, followed by A, followed by 1 or 2. Power ventilators, duct or roof mounted tubeaxial and vaneaxial, belt drives, Models TCTA or TABD and TCVA or VABD, followed by 1286, 12 B6, 1287, 15B5, 1586, 15B7, 18B4, 18B5, 18B6, 18B7, 2184, 21B5, 21B6, 21B7, 24B4, 24B5, 2486, 24B7, 2464, 28B5, 2886, 2887, 3284, 32135, 3286, 32B7, 3684, 36B5, 36B6, 3687, 4284, 42B5, 42B6, 48B4, 48B5, 5483, 5484, 60B3, 1206, 1207, 15D5, 1506, 1507, 18D4, 1805, 1806, 1807, 21134, 21D5, 2106, 2107, 2404, 2405, 2406, 2407, 2804, 28D5, 2806, 28137, 3204, 32D5, 3206, 3207, 36D4, 36D5, 3606, 3607, 42D4, 42D5, 4206, 4804, 48D5, 54D3, 5404 or 6003 ; Models TCVS or VSBD and TCTS or TSBD, followed by 1287, 15B6,'1885, 2186, 2485, 28B6, 3084, 32B5, 36B6, 42B3, 4884, 5483, 1207, 1506, 18135, 1807, 2104, 2106, 2403, 2405, 2407, 2804, 2806, 3004, 3005, 3203, 3205, 3207, 3604, 3606, 4203, 4205, 48D4 or 54D3 ; Model TCVX or VXBD, followed by 1888, 2187, 2486, 2885, 28B7, 32B4, 32B6, 32B7, 3685, 3686, 42B4, 4285, 42B7, 4864, 4866, 4887, 5483, 5485, 5486, 6084, 1808, 2107, 2406, 2805, 28D7, 3204, 32D6, 3207, 3605, 3606, 42D4, 42D5, 42D7, 4804, 4806, 4807, 5403, 5405, 54136, 6004, 60D5, 6603, 6604, 7202, 7203 or 84D2. Power ventilators, duct or roof mounted tubular centrifugal, belt drives, Models TSL or ATC, followed by 122, 150, 182, 200, 222, 245, 270, 300, 330, 365, 402, 445, 490, 542, 600, 660, 730, 807 or 890; Models TFE or ATCFE, followed by 122C6, 122C7, 122C8, 122C10, 122C11, 122C12, 122C13, 150C10, 150C11, 150C12, 150C13, 150C15, 150C16, 182C10, 182C11, 182C12, 182C13, 182C15, 182C16, 182C18, 182C20, 200C13, 200C15, 200C16, 200C18, 200C20, 200C22, 222C16, 222C18, 222C20, 222C22, 222C24, 245C20, 245C22, 245C24, 245C27, 270C22, 270C24, 270C27, 270C30 or 300C24, 300C27, 300C30 or 300C33. Power ventilators, duct or roof mounted, Light Duty Tubular Centrifugal Ventilator, Belt Drive , Models TCLB or CLBD, followed by 90, 105, 122, 135, 150, 165, 182, 200, 222, 245, 270, 300, 330, 365, 402, 445 or 490, followed by A, followed by 1 or 2. Power ventilators, roof mounted tubeaxial, belt drives, Models TUB, THB, THBF, EBD4OC, EHTABD, may be followed letter E or S (hooded version only), followed by number 14, 16, 18, 21, 24, 30, 36, 42, 48, 54 or 60, followed by letter C, E or Z, followed by number, 3, 4, 5, 6 or 8, followed by a one or two digit numbers. Models LPUB, LHB, LHBF„ EB53, EHB53, EHBF53, followed by letter E or S, followed by number 21, 24, 30, 36, 42, 48, 54 or 60, followed by letter C, E or Z, followed by number 3, 4, 5, 6 or 8, followed by a one or two digit number. Power ventilators, roof mounted tubeaxial, direct drives, Models TUD, THD, THDF, EDD4OC, EHTA, may be followed by letter E or 5 (hooded version only), followed by number 14, 16, 18, 21, 24, 30, 36, 42, 48, followed by letter E, followed by number 4 or 8, followed by a one or two digit number. Models LPUD, LHD, LHDF, ED53, EHD53, EHDF53, followed by E or S, followed by number 14, 16, 18, 21, 24, 30, 36, 42, 48, followed by letter E or Z, followed by number 4, 5 or 8, followed by a one or two digit numbers. Power ventilators, roof mounted, direct drive down blast, Models DCRD, DCRD -E, ACXD, ACXD -E followed by 060, 070, 080, 085, 090, 095, 100, 120, 130, 140, 150, 160, 170 and 180. Power ventilators, roof types, Model CX -, followed by 830 thru 833, 1030 thru 1035, 1218 thru 1227, 1230 thru 1238, 1514 thru 1521, 1530 thru 1535, 1812 thru 1819, 1830 thru 1837; Model TB12- followed by 067 -02, 080 -02, 089 -02, 097 -02, 104 -02, 110 -02, 115 -02, 120 -02, 125 -02, 129 -02, 133 -02, 137 -02, 140 -03, 144 -03, 147 -03, 150 -03, 153 -05, 156- 05, 158 -05, 161 -05, 164 -05, 166 -05, 169-05, 171 -05, 173 -05, 178 -07, 182 -07, 186 -07, 190 -07, 194 -07, 197 -07; Model TB15- followed by 046 -02, 055 -02, 061 -02, 068 -02, 071 -02, 075 -02, 082 -02, 085 -02, 091 -02, 094 -02, 097 -03, 098 -03, 101 -03, 103 -03, 105 -05, 109 -05, 110 -05, 112 -05, 114 -05, 116 -05, 117 -05, 119 -05, 122 -07, 125 -07, 128 -07, 130 -07, 133 -07, 135 -07, 138 -10, 144 -10, 149 -10; Model TB18- followed by 048 -02, 055 -02, 057 -02, 062 -02, 064 -02, 068 -02, 070 -03, 072 -03, 073 -03, 075 -03, 076 -05, 078 -05, 080 -05, 082 -05, 083 -05, 085 -05, 087 -05, 089 -07, 091 -07, 095 -07, 097 -07, 098 -07, 101 -10, 105 -10, 108 -10, 112 -15, 118 -15, 124 -15, 127 -20, 132 -20, 137 -20; Model TB24- followed by 039 -02, 042 -02, 046 -02, 047 -03, 049 -03, 050 -03, 052 -05, 054 -05, 056 -05, 058 -05, 060 -07, 061 -07, 063 -07, 065 -07, 066 -07, 068 -10, 069 -10, 070 -10, 073 -10, 075 -15, 080 -15, 083 -15, 085-20, 089 -20, 092 -20, 095 -30, 098 -30, 100 -30, 103 -30, 105 -30; Model TB30- followed by 026 -02, 029 -02, 031 -02, 032 -03, 033 -03, 035 -03, 037 -05, 038 -05, 040 -05, 042 -07, 044 -07, 046 -07, 047 -10, 048 -10, 050 -10, 053 -15, 055 -15, 057 -15, 058 -20, 061 -20, 063 -20, 065 -30, 068 -30, 073 -30, 076 -50, 080 -50, 086 -50; Model T836- followed by 029 -05, 031 -05, 033 -07, 035 -07, 037 -10, 039 -10, 040 -15, 042 -15, 044 -15, 045 -20, 048 -20, 049 -20, 051 -30, 053 -30, 054 -30, 056 -30, 058 -50, 058 -50, 060 -50, 063 -50, 066 -50; Model T1342- followed by 022 -05, 023 -05, 025 -07, 027 -07, 028 -10, 030 -10, 031 -15, 032 -15, 034 -15, 035 -20, 036 -20, 037 -20, 039 -30, 040 -30, 042 -30, 043 -30, 044 -50, 045 -50, 046- 50, 047 -50, 048 -50, 049 -50, 050 -50, 051 -50; Model TB48- followed by 017 -05, 019 -05, 020 -07, 021 -07, 022 -10, 024 -10, 025 -15, 026 -15, 027 -15, 028 -15, 029 -20, 030 -20, 031 -30, 032 - 30, 033 - 30, 034 - 30, 035 -50, 036 -50, 037 -50, 038-50, 039-50, 040-50, 041-50. http: // database. ul. com /cgi- bin/XYV /template/LISEXT/ 1 FRAME /showpage.html ?name =... 12/16/2009 ZACT.E158680 - Ventilators, Power Page 2 of 2 Models DCRU and ATD, followed by 070, 07X8, 080, 08XB, 090, 09X8, 110, 1108, 120, 1208, 140, 1408, 160A, 1608, 180A, and 180B, where X represents 1, 2, or 3 depending on motor rpm (1750, 1160, 860 respectively). Power ventilators, wall mounted, belt drives, Models WPMB, EBP followed by letter E or S, followed by number 21, 24, 30, 36, 42, 48, 54 or 60, followed by letter C, E or Z, followed by number 3, 4, 5, 6 or 8, followed by a one or two digit numbers. Models WPB, EPB, followed by E or S, followed by 21, 24, 30, 36, 42, 48, 54 or 60, followed by 11, L2, C, E, M or Z, followed by 3, 4, 5, 6 or 8, followed by a one or two digit number. Power ventilators, wall mounted, direct drives, Models WPMD, EDDP followed by letter E or S, followed by number 14, 16, 18, 21, 24, 30, 36, 42, 48, followed by letter E or Z, followed by number 4, 5 or 8, followed by a one or two digit number. Models DCRW and ATDW, followed by 070, 07XB, 080, 08X8, 090, 09X8, 110, 1108, 120, 1208, 140, 140B, 160A, 1608, 180A and 1808, where X represents 1, 2, or 3 depending on motor rpm (1750, 1160, 860 respectively). Models WPD, EDDP, followed by E or 5, followed by 14, 16, 18, 21, 24, 30, 36, 42, 48, or 54, followed by C, E, M or Z, followed by 3, 4, 5, 6 or 8, followed by a one or two digit number. Power ventilators, roof mounted, belt drives, LPUB, LPHB, EB53, EHB53, followed by E or S, followed by 21, 24, 30, 36, 42, 48, 54 or 60, followed by L1, L2, C, E, M or Z, followed by 3, 4, 5, 6 or 8, followed by a one or two digit number. Power ventilators, roof mounted, direct drives, LPUD, LPHD, ED53, EHD53, followed by E or S, followed by 14, 16, 18, 21, 24, 30, 36, 42, 48 or 54, followed by C, E, M or Z, followed by 3, 4, 5, 6 or 8, followed by a one or two digit number. Power ventilator, wall type, Model WXB- followed by 620 thru 621, 820 thru 825, 1020 thru 1025, 1220 thru 1228, 1520 thru 1527, 1820 thru 1828, 24108 thru 2416B. Roof mounted, belt -drive down blast, Model BCRD, BCRD -E, ACX or ACX -E followed by 070C, 075C, 085C, 100C, 100hP, 120C, 140C, 140HP, 160C, 1601-IP, 180C, 180HP, 210C, 21OHP, 240C, 240HP, 300C, 300HP, 360C, 360HP, 420C, 480C. Rount mounted, belt- drives up blast, Model BCRU or ATB followed by 120, 140, 140HP, 160, 160A, 160HP, 180, 180A, 180HP, 210, 210HP, 240, 240HP, 300, 300HP, 360, 360HP, 420, 480. Utility blowers, Model BC] or TO followed by 90 or 105; Model BCV or TCV followed by 122, 135, 150, 165, 182, 200, 222, 245, 270, 300, 365, 402 or 445; Models 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 40, 44 followed by BIUB. Wall mounted, Model BCRW or AWX followed by 110, 120, 140, 140HP, 160, 160A, 160HP, 180, 180A, 180HP, 210, 210HP, 240, 240HP, 300, 300HP. Last Undated on 2009 -10 -20 Ouestionv7 - Notice of Disclaimer Page Too Copyright CI 2009 Underwriters Laboratories Inc.® The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow -Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow -Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and /or Listings (files) must be presented in their entirety and in a non - misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright ® 2009 Underwriters Laboratories Inc. ®" An independent organization working for a safer world with integrity, precision and knowledge. - Ars http: // database. ul. com /cgi- bin/XYV /template/LISEXT /1 FRAME /showpage.html ?name =... 12/16/2009 UL Online Certifications Directory - Search Results Page 1 of 1 4;) ONLINE CERTIFICATIONS DIRECTORY Search results Number of hits: 2 The maximum number of hits returned is 5000. You may choose to Refine Your Search. Company Name Category Name Link to File TWIN CITY FAN COMPANIES LTD Ventilators, Power ZACT.E158680 TWIN CITY FAN COMPANIES LTD Ventilators, Power Certified for Canada ZACT7.E158680 Model number information is not published for all product categories. If you require information about a specific model number, please contact Customer Service for further assistance. Copyright n 2009 Underwriters Laboratories Inc. http:/ /database. ul. com /cgi- bin/XYV /cgifind.new/LISEXT/ 1 FRAME /srchres.html 12/16/2009 UL Online Certifications Directory Page 1 of 1 ONLINE CERTIFICATIONS DIRECTORY ABOUT THE ONLINE CERTIFICATIONS DIRECTORY You can use the UL Online Certification Directory to: • Verify a UL Listing, Classification, or Recognition • Verify a UL Listed product use • Verify a UL Recognized component use • Verify a product safety standard Learn more with the Ouick Guide to the Online Certifications Directory, SPECIFIC SEARCHES Select a specific search: FEATURED LINKS UL Alarm UL Code Services Correlation Search Database 1 LINKS OF INTEREST iQ Family of Databases ULC Online Directories Code Correlation Database UL Facilities Worldwide Notice of Disclaimer Order Printed Directories Order Listing Cards Index of Tradenames & Trademarks Introduction: UL Listed and Classified Products Introduction: UL Recognized Components Introduction: Products Certified for Canada Copyright (0) 2009 Underwriters Laboratories Inc. To begin a search, please enter one or more search criteria in the parameters below. TIPS FOR EFFECTIVE SEARCHES Select a search method • Match all words - type AND between words (i.e., display and nwgq) • Match any word - type OR between words (i.e., hair dryer or blow dryer) • Match phrase(s) - type exact phrase (i.e., washing machine) • Exclude a word - type NOT before word (i.e., roof panel not metal) • Match a partial word or phrase - To replace any characters or words that you may not know, add an asterisk ( *) in the middle or at the end of the characters or words in your search. Examples o Company Name - company* o Keyword - submersible* Refine your search • Use this option located at the top of the search results page to further narrow your options. http: / /database. ul. com /cgi- bin/XYV /template/LISEXT /1 FRAME /index.html 12/16/2009 Page 1 of 1 Noe, Brian From: Tom Harper [tom.harper @auersteel.com] Sent: Wednesday, November 25, 2009 11:16 AM To: Noe, Brian Cc: Tom Harper; John C. Anderson Subject: MOE'S MARINE SERVICE Brian, I will be adding the following notes to the HVAC plan submittal for Moe's Marine Service. Item #1 Option #1 Upgrade the existing exhaust fan to an explosion proof rating of AMCA B with all necessary components provided by the original fan manufacturer. Option #2 Replace the existing fan with a new exhaust fan having an AMCA B rating. The new fan would have the same performance rating as the original fan. Item #2 Option #1 Extend the dry chemical fire suppression system currently serving the paint booth to the exhaust duct system. Option #2 Offset the metal building wall at the spray booth wall hood to eliminate the ductwork on the discharge of the spray booth exhaust fan. This would eliminate the need for a fire suppression system in the spray booth exhaust system. Brian, I hope this takes care of your concerns regarding the HVAC submittal for this project. Thanks, Tom Harper Auersteel Ph 1- 888 - 203 -3445 The information in this e-mail is confidential. It is intended solely for the addressee(s); access to anyone else is unauthorized. If this message has been sent to you in error, do not review, disseminate, distribute or copy it. Please reply to the sender that you have received the message in error and then delete it. Thank you for your cooperation. 12/16/2009 1 4b K h ‘AD 14 h S Q1S 4 1 4 L' To 5 1 .►o0' , t s2Lard ' t„/ 9 I Cy .' S Pr C4-1/1 r , X g re C2 tiz/s :39VSSIA1 • el sac3o4 :47-12L. --2 i,„ . :16102H 'ZZZ£ 988 0Z6 11Y0 3SV3ld `(VA SIR/ 1 o - O) „ � - (Dee) -/ :ON XVd 30 NOISSIINSNd2i13H1 H1IM All(10I33Ia ANV 3AVH flOA 3I _ 9 (Z) 2 :NOI±N311V :133HS 19AOD 9NIOf110NI S39dd 30 2i38W(1N r Gt i V _40 / 1 :ANt/d1A100 6 aLVa Lucolealsaane S96b 00Z - a8 1d30 83x80 33831101 4111111111111111111 • ZZZ£ 98 :-OZ6 tZ6£ 00Z a}!IS 1 8D pooti it}uno S8L b31N3� 11VD 'DO AlddflSS WNW/ OM a NIS DNIAIMS 8TL8- 988 -0Z6 301330 H AV S/131111111N Xt►j - 010 - EO0 /109'd Z89 - 0999SE10Z6+ NO131ddY 1331S S3f1V -YIOad YId1S :SO 600Z -10 -LO 600Z /6 /L !SOS (OZ6) luslinsuoO suiaEsXS &uipitng Tow() Jo AID aoN uoi ✓8 •aw Ileo aseald sly} ssnoslp o; gslm noi(it Jo suol;sanb Xuy •s;uawajinbej algeoildde ay; y ;lm aouelldwoo ui pa ;onj ;suoo 6ulaq eie Xay; axis aNew o} ;uem am pue `sy ;ooq XeJds ay; JoJ pa ;onpuoo sem malnaJ ou se `uogonj ;suoo Jepun Xi;uaiino 6 u!Plinq ay; y ;lm waouoo awns aney eM •anssl sly; uo peaoojd wogs am moil 01 se uol;oaJlp papinoJd pue `sy ;ooq Acids Job paJinbaJ si malnaJ ueid Jay;aym wJl ;uoo aseald no/ ueo • ay ; ;o suol}JOd Jay ;o oil; wail uoi;eiedes awos aalnbei o; Jeadde lie swop peoueJa;aJ asoyl •031 ay; pue t£ `dd3N '££ dd3N y ;lm salldwoo y ;ooq XeJds ay; 6ulule ;uoo ewe Jo 6 ulpilnq aq; ssalun Xouedn000 H ue peJaplsuoo aq pinom y }ooq XeJds e 6ulule ;uoo 6 ulpilnq a ;ey; sJeadde }l •£ uol ;deoxa 61O£ O8I ;e 6upiooi •sy }ooq XeJds jo uol ;eiie ;sul JoJ paiinbai si Ienojdde ueid a ;ey; anallaq o; sn speal irid• TToogXeads 8s /soopgsinod ; }y )IuiI 6ulmollo; ay; a ;is qam eoiawwoO awl ;e 6uDioo •sy ;ooq Aeids jo Jagwnu e ule ;uoo ley; pa ;oni ;suoo 6ulaq 6ulpilnq mau om; aney am sy ;ooq Aeids :pa[gng 3Ob3WWOO - >I AJUaH VAzJesoN :0j WV F1:6 LOOZ 'TO ;sn6ny'AepsaupaM : ;uag [sn•lm•ysoNso•ld ©aouq:o;Ilew] uepe 'aoN :woad •aouaJa;OJ Z£ wwOO ay; o} ){oeq 6uio6 uol;sanb leopo;agi e aim Ziooyos olignd agXew Jo ledlolunw `X}unoo 6uinlonul uoi;eiie;sui sly} sr••y ;ieaH pue X }ajeg aa!oidw3 ollgnd Z£ wwo3 woJ; swa }s pap am.' noX ;ey; aoueiejaJ ay; Xem ay; X8 •malnaJ Jo aai6ap awos o} }oa(gns aq iiim uoi;elie }sul y ;ooq XeJds ay; `sa,1 Ja}eeJ6 sewooaq }ey} y;im malnaJ 3o y }dap ay; aouay ` ;ue ;xe awos 01 OVAH 6 ulpilnq ay} sanionui }l }ey} ezlleeJ pue uoi }eiie;sui ay; a)le} moN Joua ;xa ay} o; Xla }eJedas pa ;onp pue pause ;uoo alas Xla;aldwoo wn}ei pue Xlddns `6ui;onp ay; }e 6upiooi y;im ul6aq Xew not aaaH •;uawdlnba ;o aoaid 6uipue }s awl e aq Xew min y }ooq XeJds ay} }e Nool Ilim malnaJ oiseq }sow ay; eldwexe Jod •uoi;elie;sui of ;loads ay; o} }deigns aq ilim malnaJ ;o y }dap Jo ;ua ;xa }ey} `(pamaiAoJ) passaJppe aq;snw uoi;elle ;sui y }ooq XeJds Xue ;o;ua;xa ayl leap ay; si eJay OS sy ;ooq XeJds :32i : ;oafgns ueu8 'aoN :ol Wd Z£:1 6 LOOZ ' I 0 ;sn6ny `XepseupaM : ;uas [sn•im•a ;e }s•aoJawwoo@n ploAzJesoNy] 3O2i3WW0O - >i XJueH `pioXzJesoN :woi,3 ue18 'aoN T 3o t a$ed sq ;ooq aids iHS/ ?Z --b -7h — 7 -go - ' Gz �s� c Uri uunl S- 0180112 - Lof tS-7S �� -�-�� �`'r�'�' o .. J suoo J0i posn oq of Lou 019 suoIsuowlQ 'poleolpul esIMloulo seolun eououl up e9 uMous 9uo!suaW!O 1463 ByLL 'VD ZL 03ONV1d 91 Or % y;09 N, E9 59 09 1992 eL /c1. VD Z1 039NY1d 9l Ob 9!c 3/419 ' /BLS 69 49 1493 sY1 'V9 ZL a3ONVld 9 1. 95 ay. Wc94 Wr.OS Z9 e4 1912 B 4l. 'VO I. C3ONV1d 9 LE B1/4 °AZb ry.4'D 94 z4 1S Le 1 'VO Z l 03ONV'1d 1 91 LZ FM ' ✓L9E %B6 O4 9E . _LE LZ .1 -. vO UL C2DNV1J - Li 9Z 714 We0£ ee WEE 05 14AL L - VO 41. O9NV-1k7 9 Le al/L W14Z W LL 4Z ''':-' 191 L -VD VL 037NV1J 9 LZ , I /,. i /ILE KEZ tii, lZ 1941 1 'VD 41. 03DNV 1d 9 61 7 .64 i VL9L %%OL WLOZ 91. 1E4 4 'Ve 44 a30NVld 9 61 BWu 9491 WLLL eh94 91. 99 1 'vO 41. 9OL0 9E 9 61 Wu 4t'L tY19 L 8 491 41 3WVNJ I Z1S ' •XVW • 1ddHS d 3 N •I N 030Vds A1lvr 3 - 9310H 'VIO .1-1. NI 1 L p1. 3ZIS NVJ Np 6 NOIl3n&LsNOo ONIti 310NV I �/ •t - MO1d6JIV • x -101 %°��✓.� tail . fool _ _ _ - 1 , 0 . E 11 I 41 u I I�, �i.Cii —', - l i;� i v - I I I ./ + 119 nHH.I, .91 537,19 a31J103dS sI 1:19n0o NVJ NO Q VONV.LS 5I aCJo1 ivNOLLdO NOLL0r\W.SNO 3ONV1j seal Nn QAVTNVLS obi vne i al — uenua iaa 'uo9Onn9uoa . pesrl CC; 01. Lou (1.111 xuolsuowlp •peleol• 1 eeI tJ U10 seelun eeLpul uI 9.18 uMous suolsuaWla iii.. i 01 'VD ZL 09°JNV121 9 1 9E B N94 %OS ZS 91, OL VD I. 03DNV1J 91 1.9 Y /e %Z4 %fr1' 9b 50 01 'VO ZL p3ONVld 91 LZ 3 I /L eil95 WiG£ 04 1481 5 •v0 4L V 03ON'IJ 9 95 01 4. WeOE ZE V P. - 05 1491 "VD 41 p3;ONV,d a LZ '4 Vi 45 WLSZ .4Z 1941 'y/i L b I. 03ONVld 9 LZ •v FA LE WLZZ I. 1941 L v 03JNV1d 9 6L e41 • /1.9 e/L6. W405 91 1£ &1. L 'VO bl O3ONV14 9 el cull. 4 , L IV6L 91 95 We 'VS 41. .1'0 S5' 9 el WIL 1 / 1 4L , 'l sl L 41 3 WVUJ dH8 .. , .. II . XVW XVW 1 •d .3. ;• ' ' 1 ;'.'..H . • l.: o • .. , 9 .. • tl 3zI5 030VdS A11M1p 531011 VIa .H. 1N) , -1 ..1 BM Nvj NO dItIVONV.LS SI 1 ` N011Ontf L5N.0 CNN 31DNV 41 1 I L _Li \ I 1 I OM/ 1•a'ol IL I _ I ('0'21 1 I �iY� 8 r L J II � I I Mlrlaily ` 3r ,........ .9p nupi 431 SFZIS NVd NO Ot1V0NV,1S 51 N0110f1LlJSN003DNVld al — an140 +_ JKI elea I4UOISUO la - 010 - B00 / d Z69 -1 0998881028+ NO131ddV 1331S d3fld-NIOdd VdIS IO 600Z -60-10 L i 0£936 u9nrta kr D'1J 1Nel6 uoe9 4 0JnS *id pa6oIeleo llssd Dui 1C PA! UMOLye sonlen JaMod punog •g 'uopoeJ. o0 Duo ;0 s.p9J 9 eta epnllul Lou op s6up% •L9I1n0 po;Or,p yalul eeJj :8 edk uegsusl'ul Jo; slonol ,rdmod punog y!M1 1e111! J0J ern, Umou9 e enleq •g 1oE pJepuelg VOWy Jad palelnoleo sU3M er -01. 01 p9 JmmeJ 'sIoopap Pi sus UMDIJS eau= IOnel JeMod puns eta '7 •(souossooe) seou =ue1Jndde ;o 5106)46 ey1 epn)oul ;0u op zauptu eoueuLopod '8 •o0 0I uolselwsusu opnloul mu se 00 (dHe) 13U11BJ OMod 7 'iapro pelonp 'Lelul ooJj :p edXj. uoI19I E1 ul JoL al p9Ulue0 eousw.O J0d 1 1 :9] jQN - ""Bill 86'6 687 96 - 3 16'e 797 91. - 3 89'3 we 50 dH8 '. E99 8116 01 4066 OEZOL 8Z90L 56101 BVOLL OHO I 9691 E zfe3v3 91 ~ `81' L 66'1 961 69 Nam PL' L 99'1 d1-19 9ZI. . 0SZ9 MI L606 6985 E996 MO Z6 06171 3 3 MII 67"1 witmgrall eel. ® VT1 dFIfl 011111Ww J _� 860L L79 �r-. r 0448 O9LA WA � '� L ZEB3tr3•Bl _ 00'0'M C• i YIfl 9829 Lg _. 1 98 bL E _ 9 1 888348 53Q L�1 99 0 29 dH9 M 0665 L399 3969 Wd° 179 IL 7/6 886346.91 09'0 97"0 3 9 6 0 1,Q _ la 6099 "LL09 Nda 08 L86 2/ : 43111 M 26'0 83'0 dH8 11111.1=1 6089 lit- d� 94 1 L9 E/L ZEE P - 001 66 "2 96•6 867 69'z 49"Z 9L7 EL'6 99 09 "Z d H9 650L 608L 41.1.2 ORS 0999 L699 0216 LC$6 41 Z4L6 Wda • 8818 E 91-4346-91 867 L87 76 061 L81 29 911 OL'6 601 175 "2 dH9 9881. 6168 4419 9118 9076 69L6 80101 61701 6711.01 90041 W L OL 3163 C 1781,346 1. 567 a0-E 601 66 .1542 -.56"3 887 19'Z 7C7 dH9 - ' 11168 6610 8916 2696 10301 43901 25601 9681.1 66911 101j0 96 LL61 8 Z£b37Z 81 66' 00'2 861 16' 89'1 69'1 v9"1 0C EL'1 dke 1L68 0949 1999 002E 7091 3811 01 2929 LL99 Lryj3 10 4 zBEZ Z 944 el 16' 1 00 96' L 96 361 98' 1 28" 1 9/.1. 691 dH9] 601.9 .99L9__ Z8LL 09 Ls , -L95e - -9368 9L66 01.96 Ado LG 4961 z 484348.91 007 00"Z 001 90"1 46'L 82 E9'L dH9 3964 OZ8L 29 9 9762 ftve EMO EL10L Wjp 66 96L I. Z 884348.01 64' 1 0611 05'1 Br 1 W I. 07' 1 98'1 06' 1 dl-16 L9L9 1919 8660 7659 5169 8161 997L 6ELL yyd0 66 SLUG 1.,L 91.4942 94'1 051 867 L 94 84'1 56 "1 881 L3' I- dHe 2919 1409 0E99 681L 6L91. GL6L 89E9 6819 Wjp 56 409E '/L 464346 el 09:1 09' L 6671 LP' L Er 1 LE' L _ dH8 173 1899 Si. LL 6611 6.968 3498 ens two 08 0191 ;/, 864948.01 001 66'0 98'0 46'0 180 dl DLO 6489 191.9 971.9 8949 091.9 Wjp 96 006E L 9Ltr9672-> 66;0 88'0 LG'0 676'0 05'0 59'0 dH9 7894 9996 8629 967L9 1031 6294 1%0 08 9193 L UZV3bZ •81 S3c`dle 58'0 0011 90'0 96 65'0 d 7 6698 9089 6601 DL9 / L /.08 Wjj 92 34e1. L 38434Z 64'0 71 31'0 69'0 59'0 dHe 5174 6009 6845 9095 67819 W J � Z6 461.1 blE 914376 91 SL'0 41'0 6L 99 '0 49'0 dHe Cat 9985 6969 8949 1.869 An 9 ZE41 67/E .317293-8.1. ' 6L'0 9L'a EL"0 69 "0 dwe 6809 4089 568L Wjo 8 572E WE 184776 81 05'0 67"0 14"0 84'0 dl-8 1 11111 669E 7654 6L64 9555 L 3 '9 9051 6/1 919378 91 06 66'0 g7 0 39'0 dl -16 1507 8881' 1.124 0009 W jp 8 1521. ?A v67317Z-81 OS'0 66'0 96'0 d Hd '8 880 3/1. Z8b3b29i -= 0187 191.9 9049 Wdp ee'0 28'0 62'0 dH9 149E CVO 6194 Wd0 9 S1EL 6/1 91.484z-el - _ £E "0 6£10 92'0 dH9 198E 1597 0839 MO - 4 600L 6/1 436342•01 E£'0 08'0 dH9 006 •1 0961 000'1 SLw0 1.0 iSIM o ° 11 15 • ! .0 MVO 531.'0 000'0 0120 � l all ZEn? Dl C6 1 I ,l I I ,.._ I I 1 I ;... MO: ` � � : all: ' . saav>le .� ' vM•1 o . . a . ''' s tJVd ao.4aw �901V1y9: ,d0'ON J6HadoJd wnuiwnIb }sea a,a - 81 uani�® ila "I. eiza o3IHwaoJ - - 010 - 800 /800 d 163 - 0998881016+ NO131ddV 13310 d311V -110 d hdlE'E0 6001 -60-10 B - 17 -2010 08:39A FROM: TO: 2365084 P. 1 I ; � I 1 j I I t.... - 1. - tee-\ : �u°M' i I v Vie) `rY) �Sa‘qom� � i I 1 1 -I", n 0 bye, en, I S) T° . I 1 t -c, ( ^^ 0 -Oaf f 1 ! 4 S Vo ^ u-l_, S On V v\-k.P9 "1- C. ; • - a o \J \ ■ J S ' • IV 4 . i j i I. FEB -17 -2010 08:39A FROM: TO:2365084 P.2 ' f() 1 Z!1`9$ lelal . 0) os ( %0'0) xel sales lau•aalaego@n ssaooidieug LLL £000 t9 :flew -3 # xe- # auotid i Oft Z}i �1$ Ieio3qnS •iapio panien. Ina .iol nOI ytm 41 1 1 ---------1, I r c' - rVl y O cic€ * L 'I fd awn sigl le anp si OS•0 p`£$ I - A.tangap aalle sip OE lau `iapio topyt %OS ma slum .T. i I II i 18 05'0t• 2uu 9upa2uu4o „trZ bZ N.) i nun* olpe „bZ t'ZSV 1 � hZClcld I U!)'()01 NMI coop lno -ugaia gltnn )ioels lsnetixa uoi „9 x ' tp „bZ saxnlxg 21-12!I £i puej 1olow e �o sued o�luoo eo«loaia 0� /£!0 b () OO 1 ( „1'c41' 1 n(1'SZI'[ d H Z /i 31 ( i slop Ailua a no atal t tin L x tnn L080 1 0 x)86 00'08a P is P P l3 u , P .8 - 1snrtixa ioeg •.iolow as-mid E `lion 80Z 'ointxu ')o 1 r'h 00'St Z`b lug ?! £ glint glooq Amtds tuted daap ,bi x 4P . li,L xIDINPn .8 L080 1 _ IunawV api.►d UO,ldi3S9Q 1 epoQ wall A,U i 1'M. 70 sladdi to 0£ lau ` %OS U 1fl 'I [ry.,aA x l.'tl y 2t gS fl LOOZ /8i /Zi e�n elep diyg dad sate$ swOill JagwnN O d _ - - \-. I toot�S 1M 'tlsuyllN( ) 106bS IM `gSO�igsO proN pu!mism\ ZZ' )- ;aaz15 nEUta3 .g 08Z •. \------- �ui'aa auimlN . � .Dui •30tn1OS au!.re s aoy�i , of ui> 01 dlys 1 tK Z LOOZ /8/ l 1 060£S IM 'P«” • # ao1onul sled an t t(l .I l` OO' OAUI •;TTj `X(ddn5 v iuntudmb_.{ s- i [*] • [2] - 1 pry d iri1 NI a FEB -17 -2010 08:40A FROM: TO:2365084 P.3 I I I • tau aatlpip 3jssa5oacl1QUii Tpwa .' £UL-8££ [Z9Z] XOJ • £000-8££ [Z9Z] uol • 060£9 IM: ' p ua g i J a iI °M i 71-109 `qd £•A0917 /0£Z /8 Z)'.toloua dH I e ,Cq uanup a9 ll!M ueg •gaooq i(iduwa 1.12nolgi ale Jo INdd SZt Su!plgold pu 'alnssaid ogeas yAlnS 009`S 8upwado uej aalamelp „vz auo brio pa road aq limn 1r[m sp. :Tlun ue j isnwgxg I . asegd al8uls /A0Z1 sr 38711°" P •saanixy 11 uoIs!AIQ ' I snip (v) rr.o g11M pagddns aq i1 M Ttun slq •Tuautaoeld pure asn papualut 1ragT .ioj panordde pue paisrl ' f! are sainixu tld •8utuado s lg8il agi Jo 1alatuuad aq1 punoxe pomp iaggn.i E ql►M Tooq Aeids agf Jo aoualul aqi uaoru pleas sl Ted scup AlaJes paladuial ping q p §lunotu sI !pug •sain;x1J adiCa auaosaronj `nem Z£ '8 - 'agn2 -p ':1uoi „8v puE IiQ'I +i Paprnold sl 8ugg2r! :uofeutumlil - papniaul are uol1eirelsur gTooq agl 10j papaau slue as puu 'aICMpaeq lld - sun aaqu „£ x „AZ x „AZ (9 i) 30 las a pue urrT; 3 a'oioapap ai j. a mug !pm wog - Xiquaasse pagoq aoj =woo « 9 uo pagaund ttotueduzoo g pauuoj Tarred goea'spued paluredun paztuenle8 02ne8 81 paloruusuoo aq 1iiM gloog i :slaued :suoyuaIJpaas q ;oog Au.aas «8 - .91 „0 - .1' I :tpdaQ (tie; 1snegx2 sn1d) «Z «0 - L • :1 • • «t -,8 ‘.0 -,& ; :gTptM• • Joualx3 aopalul j I. . • :suolsuaWEQ ;oog :wog ATaaas auA,I, aoo13 luUlsupul ti # I ;aw I :sMolloj se St alOnb AN •lsoa uoi2elielsu1 ue JO uowppe 344 .10J sl aolsrn021 •uoferapIsuoo moA Aerds Tured 8 uTM 0 llo3 a11o; iesodoid paslnaa ,Cur Ttwgns oT paseald uae I uope$aantroo auogd auaaaa ano lad 'uamu7 reaQ I# • na21 11.00£L0# alonb ' 106175 IM `gsmlt{s0 peo21 pulMTsaM ZZOZ •outI 'aalnlas auueyv s,aoy4 nlsolge uame-j •syq LOOZ `9Z 1a9o130 • • 6unem mud 10 Wied tuumgap '6111118913 Zsseaad pug maf si pqm S a clA L • • • FEB -17 -2010 08:40A FROM: TO:2365084 P.4 i &Ssp OE lau `zap.to 4Wn %OS :suuay ?L `jjnNjao'i :god s)aann £ - Z i •sliuuad zo `txoilaalozd azg `suotkEuauad 3o Suijsas .io suogualauad ITEM `jsoizloaja apnjot;i loft saop 2uioud anogv ** 00'SZb`Z$ aoud iau js�oy i �BM ttEdodq; )josls Isnsgxa uru pus ajgtuassy •glooq 3o apis jaUed jo luoo lunoj,s -Toot' ;uog of szoop paialjt} jmsul •tpooq ABids lured daap yj x rj8tt L x apron ,g us jjslsul :uoiaspe ;sui (p,baz Z) Nom dl zat" nqs pub `suopas Nosas sa/ 05'0t7$ Sutloautzoo 10J sSuu Suuoauuoo «trt 00'06Z$ za2ings owe «tiZ (z¢loux mop pazinbag j) 00'St'$ uouoas )jaeas xi pajjslsui mop ssaooy 00'55$ uoiloas No= Isns4jxa uoj « 9£ x zalaump «tiZ :ma psn8gxa joojzalui uogoalozd aztd sagolinns jjo /txo am-Iuzad° pauuoasip puojzano tpim lapels zo2oux auauing 4O1TMS ;oauttoostp uisut pasnd -uoM aznsojoua Z I suxaN 00'SZVIS :2tgmofjoJ alp sap tjout jarred jozluoo jeomoajg 00'00'086$ (q L x nn ,L) swop Liu o Irto- Suinns ajgnop pazalp3 00'StZ`b$ wog i( dS VI PPM : uiaud Zdud pjsojgsgos uamwj 'syv FEB -17 -2010 08:40A FROM: TO:2365084 P.5 • • • • • • • --s'644Prr?. saa8unr ua!r 'i(jaaaotnS •aanlnJ aeau atjl ut noA tjlinn do Mojjo% 'um I 'suaaouoo JO suotlsanb Aug tjlinM IMO aleltsatj lou op 2sea1d •uojleaaptsuoa mot( .oj luatudmba anoqu all alonb of kliunlaoddo; alp aleiaaadde 1 'uamui € abed njsojgetps uaann' •sysj • FEB -17 -2010 08:40A FROM: TO:2365084 P.6 £LLL1EC -Z9Z :xad f000-B££ -Z9Z :multi '' - 060£S IM in `Pe MM aAPti AuM Ofd I • Addne w lnra1dlnbi ¢a»a•,d0 wOa'gtyiiulO3 MUM 1/ 4899'ZSP'899 169 woJ•gslaLu oNosales :lllW -O // X1 'crimp •aul 'sg1oo8 A.Jds Law 1,,f- S L 1 1 Li-l Z Z l dJ 1 . z.:..-2. . c. a: ` _ ,.4Ji.:41 '_�.. • , u (4..s,1 P5 .. . _ _ 1; 1 i- -' .1 �Z 'FIT ' dD asvgd 'd'H IJOSO$ '0N »gwnN 10P0IN asgwnN IsPaW . SH1008 1VIlILSl0NI /3AIiOWOlfV - 13NVd 1OHLNOD 1-4) •suo!;elnba4 YdIN Pile VHSO ')3N Iiz gum dldwoa sianpoad glooe Aid 381,11-1o, )papaw! uolualo.id B.113 .�� r'1jiflIl1 Salp11MS Jalaa a uo !SO -oM 11110'14.:`..-rt 1 l)auuoDsla peCIJanO yl1M s1aue1S :,, ` laauuo,slp pasn3 UON Itib '', t ; 4. ansolau3 Z l VW3N _ + � - 53an1v3df .J�� s : • r y '''i ,'.:i 4 ' •sJaleaq paiel ;u! Ja /pue swalsAs 6upueieq ire s e , a , ,, , ' shun do -aliew At 6uiinreaj sgioog AeJds la1N - !off " ' 13W7G� :,.:="`-• _ ''�1 , -":: Jo Jo; papuawwoaaJ loN 'UO11e1.1001 JaLLlJ11; i , , ' -- ; angsluasardar AJOUe; lnoit 11nsuo7 '5U011 , .- , ' ,., ' ; i , r • , . , - elado asEgd (t) al6uls pue asegd (E) aaJgl Jo; ; s' ,,> „� n ; ; s paublsap am siaued loJluoj 'ppolJalul uopaalojd i '. : i ' aJ ylun g»inns J ;O /uO anpulado pue zaaUUo)SIp - u ';:*,, -+I 1 y ' , ;,, 1• pEOIJaAO 1{ JaU23S 1O30W 3!laU66'W 'L��IIMS 7 ; ;, , ' '' , 23auuoaslp ul>sw `a.insapua Zi VW3N a sapnl�u! • x •' + l p , ° ' + ' O l% r � s IJE !wed za ay; s 0 Jluo� l a Ue uo dfi J OO 114611 e s d 4 4! f d' �i u ti r ` r 4„ f , pue As Jo; lapel -107 Aq pa3IM -aJd paddi4S i ! F ' 16f E C ; o r i : ilk` ., J A a � t S• �' V'1 e 318tl (VAV 031511 113 • ; , - ;14„, 1.4. 4 = t ;' • n . `,'` 13NIVV) ZL VW3N G31SI1 in ■ 03DI1Id A11‘0I1/1ONO33 • S13N1Vd 1OUJNOD fig } tv. _ A. et • =3.1011.1 I )0( - I X 0 • si //onq fP✓ds c1 / 13W :1O3 1 E' - ELLL -8EE -292 ssa00Jd Ieut3 Wd6E :DI L002 OE Inr FEB -17 -2010 08:40A FROM: TO:2765084 P .7 3QIS 3S213A311 NO SDNIMv21O ONH SNOISN3141IO HlIM S12IHHD 3110W a xaa =oa / ■. Lsn8Ux3 t 1111111111111111 ► 11 lxOZxGZ . • \ 1 01119 .■.. '' t - is"!°� 0 e�eWi i , ,, �)h`�� b3illi .i.' ■.�■ 3011VD M01d ..dvtla 1 1 IONVIV f . i .84 9�w „0. 1,i.4 '' � I .81,_ etAblY _ .81, etidS y r . a► zb'aw 21, a4nav .0E 0e3w ' .0E 0Enav ;;; : .oe oc1 • 1=n - .�z azndv .1,Z 4ZdS !a .81 91.011 -, .81 8Mlid ; Al 8149 " .4L b1dS 1 810 oN Ued 'e!(.1 'ON ued . �- 'el0 'ON Ind a ` /�J i ■ MAW 1110.1.0 IN ;': 2rOlr7LLN3n 3002! 17na 1vtlI4s ,IlvWOirly .84 en3S4 „9 801308 0.1....1%. .64 SPOdd r .84 8bdd ` : ,, 0010 .Z0 Z01350 2 Zti Z41E06 _ 21' Zt' ad ' .Z4 Zbd O6dd d Z .0E 0013Sb .0£ 0E1308 F3 t. . OSOdd .1, ► ' Z OZ13Sb � bZ1306 f'' ►Z 4ZOd .0E d is ..*Z Z ►Zdd .81 811351 11 ..81 811306 1 .. !1 � 1,l 0350 .1,f 011306 4 1 .81 8 1 .ti. blOdd .1,l ',told 'ela oN Ind '810 • cN 1.18d 1 •e!pj . oN tied 1 5 9L eras ' . _ - :NI 'oN lied '1 ,, M oSb Moog 06 11000 inONV313 I LIna Nlvid i nO A.10813 IFLL Mild IM Tana Mild S31U1OSS3DDV aNd )121OM land F ' x _, Y i:,; to , ?4 , Y vQ. , t { t . a 0 to t 6e " @lr.... m , ` ` u. �� +h., V ,;tr="' .2" -.. ,-., .-.• rs) • ,) 1\ t 11 'a ).1(.1 \..1 •: ..t /4Gooq be ' ✓!.)'=: ,. r,.1.. la W-'10D / 4.• EGLL -BEE -29Z ssaao.Jd TeuTA Wdis -OT LOO DE Inc FEB -17 -2010 08:41A FROM: TO:2365084 P.8 rl Iclull 17,If X._1 =s q4 ooq r, F?. /cis IA IN 10D 'PO. , ; , CLLC S£Vz9z maa X000 s - z9z : wo341su 060fs IM `PAS traM 1 0 /44( llOM OE6I hjddti 'tuawdinba smel VIM " .aP' 815V .s elsekid .91P 8P3Ud .94 911S4 21 Zt.Sb 2t' Z0dLid 21 Ztjkld 20 Z9S.1 .0E OESV .0E 0£UFJd .0E 0E3ad .0E OCSd .OZ 1ZSV .bZ V d id .0Z 1Zdkld .bL bZSd . Bt 8t$V ' 91jlid .91 91J14.4 .91 BLSd .01 171SV 713 9l3kld .11 V1d .01 11S 1 40 '0N1-red ' " tied Isla 'cN ved' 'oN tred 11311f1NS 3LLVINOlf3V SOOkl POL1334d 1 wu ONV15 NYd 37NY1d A 00 C0', Millnallmm I 011111 IC7 - 1 ..... e.m.0 111 , .90 9 ® .z >a ∎ arxNO N]11MS r - Os __ _ riliTh,11 1.1WM G 0 O .0Z 1ZXN0 �� III*_r ' ' .9l 91XNO LI .01 _101X070 Ilia � '0N tied (--) — H31V1 71NVi DIN III 9911133NNWW (panuIIuo3) S3111OSS33DV aNd NaOM Iona S °d ELLL- BEE -E92 ssaooad IuuT3 WUIb :OI L002 DE Inc- FEB -17 -2010 08:41A FROM: T0: 2365084 P.9 301S 35113/011 NO SN'OLLY31A133dS QNV SNOISN3WIQ HJ IM S1bVHb H.LOOS Aiquiasse pien6 anlJp a gum 6uo1e 1!un pea yip% papinoid ..J! SJO 2 O 1� / GO) it d• J- - +�� �auw �Csviu u ueu{� 'is'neyica ayi JO weauas _lie ayi woij paleas ale s6uueaq pue'snNp •suolialntlaa Vd�1y pue VHSO It! N�lM Jolow ayl'uollDnJasuo3 6uppVcis -uou Jo,PJe:suej J(Iduao� si�npoJtd yioo8 Muds Sall-103 lsneyxa IIVf 'VIEls asneyxa pue yiooq al-11 y6pouyi 'marJJle ayi s.aMOd syiooq A2Jds ruled u( asn Jo} • 4 - siaylo ,c q pallddns aq of ale swalsAs Iawo) aJIJ A► {�I�IJads pau6lsap ueJ lsneyxa IelxEagn� y 'Ieuolido s1 laved loJauo3 "AIgwasse Jo) 1(Jessa3au S311111V33 W3.1 ISfVHX3 slueleas pue creMp q 'siaualseJ 'SUOrprL lsu! , ualaelleisul apnpui sabe�ioed yiooq !IV sainixy ayi yilnn paysruin iou aiE sagnl iybi1 au" - ivawa)eld pue asn papuaiul 'saaejJns leuJaiul yloows J!ay1 .101 pa/wit/de pue palsy) in aJe saJnixrj 1{ti apinoid of '�(IleuJaixa pauauuoa ale sa5uelJ aa�lse6 �Ioe1wlJi a yilnn paleas pue ssel6 Alajes Iaued uoliei {easul lloq- pue -in ti Area Jo) pay0und paiadwal nap pulyaq palunow s! yoea "saanhrl; uolslOaid ale siagwaw iioddns pue slaved Hy 1 y 11 luaosaion13 'ueM -z£ '6uol u gb 'agni -inaj 1.110.11 'AJessa)au se syiooq 01 Allpl6!J pus ya5uajis ppe uopeuluJnlil yiooq III '14614 aa5 syiooq paiy6l� PI pasn s! laaas !einlonJls is pazlueAle6 %lli nb S3bn1H3d DNI1H711 awed 'e6ne6 "gl woij paoru1Suo, ale syioo8 Sa?1VaNV1S Altl�lllb QNV suolleiado Muds olieuioine JO sMOIJ J!e pampa S ONVO "3d NO i .i ivi 15ONV su IliM sE pappe aq ueo s4agweip a>,elul pue saran wawaoeldai J!V •sluawa.1lnbaJ JnoA laaw of pau®lsap aq Aew saJnsopua pamau46ua A11epads '4)ede3 uel lsneyxa Ieuolllppe 6u!JlnbaJ r t F 6 4iii,, ,:ii •,'i lnoyijM 'eaie wail uado yiooq ayi jo 965Z se i fi Fly yonw se aq uea s6uluado y6noJyi -sseo JoAanuoD s i = ' - luawaiinbai uoIianpeid ,' Aue Allejlioeid loam of sublsap jo abu'ei apron a ur 1� �. ,,r,, q algeilene air syiooq ayJ •asayd il soue ayi oral pue x : kiw. walsAs lsneyxa ayi y6noJyi pa5Jeyoslp sl ire paiai :p: �J.,.-,c4,4,1 : - Ili ayi aJoiaq sap!ued Aeidsiano auiogile ayi de/3 a iii sially Joasa.0 AJp ayi - yiooq ayi to sioeq ayi u ■ 1 ` �R, 4�lp )Iueq Jail!; a y6noJyi palsneyxa pue eaJe fJOM NI y y �: sso.Oe '11404 uado ayi 46110.141 u! uMeJp sI moil ity r`'�w,�,1, •swalsAs uoii�npoJd pazlioAanuoo pue adAt tpleq - (nog J oj pau6lsap ale syiooq (apow Jooij asayl +1 t ?; 318V1IVAV NO11VD1111V3) 113 • :r '‘',11t6. 11VLSNI 01 ASV3 ■ S N71S3a NOIl]naO)1d — .. • = 4. a a °, 7. -" a31v voinv aNv H31VII • r NOI1Dn81SNO3 Alna AAV3H • SHLOO9 lvivisF1 ONI IN0113 N3d0 pp a Al ,• m4 1 ' r " " i 3 a d7 ?T :,. s 4 �..5 �IIii• j r0, gl m+ 0I u } , lii e _. G . : ,;;7 r' ,: m C ' i -t .>> 1/ Ig, r �pI 1j� yF 1 i i t. 1 c/,i o /62. /e_/5 ':a �'" t 9'd eLLL- 6EE -Z9Z ssaoo.Jd TeUTd WdZb :O[ L002 Oe int' FEB -17 -2010 08:42A FROM: TO:2365084 P.10 13 43 ..ter £L 'MA , "' ; 41'1 � ' £000 8EE :auogdt 060£5 IMPS In i M ui o � •gs" anuQ3[aM 0E171 igddng v laamdmbg ssa3o41 [ewj '3111 `sq;oog ModS 1.W-lo, ".:.',"."1. `•` f i ° t an. It a41 :,,°a7 ! 'T - f l. t ..; 0' RLr : OOtb OOOLZ dHZ /IL Zti 09 �Y 9.Z1 4 DDt'E 000' I Z dHS b :-t 'T��i:= x. �yV .� ; i:..�, w� .7‘ x, •. .Z 8b Z•.1I 9 O,St 241-81 i(`,t1._4` , t - --..4"'r . ), T. r ,: .. --- ■ • r ' f ci .. , f '' r,;';:. ..,;.J . .:... ' d 00ZZ 000S 1 dHS .OE 1 . � - ' 1 ' . f Zl D � ( 1 t .1 - ; ,• � r , I 00S' I dHE .t-.9 LT: ^",' : lr + ...„:1..;.:,;',..r. . --, d if.tt. - 1 .: :a .. :..14 f r•,F� •.i Y I7V BI r iit• . `, J fir: OOD b f 005 ZZ we � r dHS .'k rte, r �: 1 ,,i,a 4 „,-,f,'....). r , , : ' ,r: *+ _ : . 217 OS Z,11 .9-,01 : .0,61 ,L ,01 . , 0181 000`f OOS'1i a 9 F.',': 0l ..7.--., O Sl OI 01b1-91 � ,+ r- ,1. -� ,c Zb 06 Z I l 1- f - �;i ''' +I , IR v ik ; ...fit it ” : 41. ,1, .,, 5t " .. _m!; i c, . 4 , 4,14:,t VN , , *., • T , .c .1.. ; I .':3r Oct ‘ Z 0OS'Zt .0E SC .Z , � j ,,,... ,, «k Ol .(} ,5 01 .8 0101 81 l 1.: •4■ J.', , r e. .t }: , ;.(Ai' ) r., 1�, i1 4 A 4 s ,� . .;;:-.1...,..,:,'•,- c ' 'i :.s ti S 1: ": -' s OS9 I ODS L dHZ/ l 1 .bZ S ( Z 0l .1 01 9 019011 ', h, 4, -n! ' .#;;? i „ f . 4, nta�. 1, t a � : Fad: - : !4 - ' a ini . /.,� i,t,i , ∎.4 ', .,. -.2.4.1..;;.',.,,j.4 4 'm i : ,-,1' i�TT , .', ,'v. 1 +i ..t. . :" h ' ti . .d' r. i lf r ' E7.•-- �' L ;":Y ,r , . )_; r 2 0 `,I I! > - `:£., s x n OS I E X0'81 dHE Ob t _ 0 ,61 9091-91 ?a ��,.. c"' :'c i 1.:,. .+�. ALL �. ... y.'3.? � � t q mi f ros i . i. h �, , t '� , n,[,, .,u "A f4 5 ];, r . ..1 : + ' 009 DQOti) dH5 OE�'tt�,t,A 8Al 9,E 'T.1. '.! F _.:- ..f .x `Y• , '�• � 'r.Y1 0 51 801.111 081 4'4- 000`0 1 ^ :'.+r• At .9 .i.. ':,. :i':) SKi +r.� f�� -t, A,. r4• r ak .... , 41-1Z .0 E OZ Z ,8 , '81 400 dH I '' "_'• .� � �� r , ay � , ., 0•0( 8 6 8001 >.. a � - .. : OZO 1 ,"Z .0;9 9 8090.91 ± i � M .�'i. � i"��.. ' ° M :' , • Y_ ?• :' Ili" ',g!yLfa 'cY,'`.i 4�S °yC. a �,..54# i 1 :' :..., �I r3.F r 4�1 i �.. :. , , 4 , : l 1 . 4 9 1-4r n .< '''•. ? Nt t ' • .•i 0 i • 'l . ';',- ' s t I - ,. ;i.g; d ',i1 000'E 051'51 dHE Z4 OP E. 2 Lei 0 ,L 1 ICI 10811 OS6'Z 005' a �,t... ; ..:i. .:: : • Si' imm dNE ,OE f .. !1-‘',- :. � ZE Z ,8,41 � .0 ► LOiI . ;,..r. .. '... . < ,.: r ..2. ".: �.i:':1,' 9 x. -!+ '� a rq., - }. �� Si -� it � , OE9 1 OS, 8 dHZ/ l 1 .0E OZ Z .8-N .!, 1 'n'.~ ' da 0,0 .2-4 1 001 AI • 066 05E 'S dH I hZ Z 1 ! .8 Irii .p 9 , 11101111 _•.• _ rx,. f 7,t� r a'' .9 C09011 3 4 ` aM dS WI dH aaliW! s:pl sy, ' : 11�IYi�i�� , t ' , .: � � r,:.. �iii�iii�f�ii 10 Ili 411131 1q 1aH 1 11p M 11 ua1 Ul IaH +-111 la4WMN w( IS @ *DS or3 ue3 Arp j •A1D suolswwlQ ropsix3 suolswmiQ ao)iNu1 IoioM , SH1008 ivivLSt1QNI 1ND11U N3d0 SNO11y)13133dS ONV SNOISN3W10 H1IM SiUIVHD H1008 L'd ELLL BEE -292 sse00Jd TeUt3 WECb =OT GOO2 OE int' FEB -17 -2010 08:43A FROM: TO:2365084 P.12 00 Imo]. 00'0$ ( %0'0) xel seieg lau•ialaetlo@n ssaao.tdleug £LLL - 8 ££ - Z9Z £000 :flew -3 # xed # auoUd 00 1emitgng xapxo panien ino.f aoj noi( lung" /1 :/-1 00)/i 7 5 C ,d sI(Bp OE lau 0S'0Ib`£$ Jo anp aaueirq agl xo3 s! aatonui srga •noX *imp • `850£8£# 1 TIAN L0 /ZZ /I I uo pred SEM OS'0 IVES •i(aanriap imp sAup 0£ lau `xapxo gl!M %0S axe suaaa,I, O0' 18 OS'Ot 8up 8urlaauuoa bZ 17Z 00'06Z 00'06Z lafngs olne bZSV 1 00 00'00I xoop lno -creaia twit xoels )snugxa 8uoi „9£ x 'urP „tz bZQdd 1 •samixg 148!1 £ pue aolow 00 00'SZI`I 'd'H Z/1 u aoJ laced loaluoa 1e3laloaia 09 /£ /0917 000£ 1 00'086 00'086 sloop Manua aignop pomp ti2r4 L x op1M ,8 L080 1 •lsnegxa )iarg •ioloui amid £ IPA 80Z •saanlxt3 OU'St- t7 00'S17.r't7 1u £ TVA glom( Aegis lured daap ,til x g8nl ,L X OP1M 18 L080 1 Iunowy EPOud uo: d!JoseQ apoQ well '30 • X.1. `IPPM)ao� sxaddtgS - lull L00Z /8I /Zl OE lac ` %OS uaane IEq.ran '8'0'd eln amp chi's daa saes swaaj JagwnN '0'd I06175 IM `gso)igs0 1061 IM 'tlsoyys() laaals neuxa3 '3 08Z peoli pulMls ZZOZ 'aul `33!naas auuew s,aow •0u1 'na!/ S aupuN s,aoy of ditie 01 we � 5179Z L00Z /b I /Z I aaionu1 area 060€S IM `Pu antaQJ lo 03!OAU .D `Xiddns Jg luauadinb1 ssay FEB -17 -2010 08:44A FROM: TO:2365084 P.13 00' SZti`Z$ l e10j 00 ( %0'0) xei see pu•za go@n ssaocudiuug £LLL (000 00 ZS Ie30111nS Mew -3 # xej # auoyd •zapzo paniEn zo3 no,C xuuq,£ n 0X )/rytyt-6 / 4 2 4 7/ "fr- 23•° -1 P d •siaqpo Aq suogarlauad •1iem pug ino )1oE1s un) 00'SZb`Z 00'SZb`Z 'giooq (bap ,i7 x gSrq ,L x apron ,8 tie IIElsuI s,aomisui 1 lunowv awd uoIldpossa apo3 wall )(l0 '1100 inoA AEM lsaq 8002/OI/1 ;dtaaaz uo ono uainEZ 1>?q.ran '8' 0'J ey\ amp diys dej saes suua j JegwnN 'O'd 106t75 IM `iisooigsp 106t 7S 1M 'gsoiigs0 �aa qS nEUZad g O8 puo'J pupAlsaM ZZOZ ouI `aoinzas auU8N s,aop i •oui `Dolmas auUEyl s,aoy� 01 diys • 01 1193 91a 800Z/171/1 9010nuI age 060£5 IM `puag 1saM 03I0AUI ` i S � a s SS 31 �d � ddn uawdlnb ssaooa rug FEB -17 -2010 08:448 FROM: TO:2365084 P.14 • Wuowcislaw1o3 •M,w N► • ££8t-ZLL (ZL6) :xed • b899-ZSb (888) :auoyd • sipoog 6erdS pw-Io3 suoperadp 3uaplsaad a /Uawokuow opuuoa •uor ;eogrixao /Cxpd pmp mime aq pue uouoadsur ssed;irm luawdrnba alp ignop o; uoseax ou sr asap pue apoo of aoup px000e ur pannoeJnuew uaaq set; airs uo anpti noX ;uawdrnba;amoD alp ` &upsrj w.ti - p uo lsisui xo ;oadsur moX pinogs •aigissod ;ou sr ,Cguregd srq; pue pawn pue paggwasse Aga;agdwoo digs of airy mom tpooq lured aqI 'spank xatpo uI ' &iisr'-j pain a so paisa; Nag aq osir isnw paigwasse pgag aq isnw ;etii sionpoxd `xanaMog :a;qc - isrl w Hu axe m paSangd pup pa8ppedun aq ueo Imp •o ;a `suorsrnaga; `s1oiexafiglas `sraundwoo `sra;seos •paAa; se digs iou saop ;ptp;onpoxd;Cue ;sri ;Du ;pm ' 1f1 41 sr 'camel NI wog &unsri , a sago two raxn2o Jnupw q ;ooq ;used ou pstp uos83r aril, •(rampejnuew ;Cue) kio ;oej alp wor3 amp/ix stpoog ;ured pa;sr7 ru m ou axe aratp wrp pug i;rnn nog( pun= )ioatlo no,C 31 'liuuad 2 anssr o; xapxo ur annbar ,Catp aegnn uo JCRs mug atp seq « uoriorpsixnf 8urneq potpie„ imo; atp pue saugapmil axe sapoo isuopeu asagi `1anannoti `.(8ur;sri i 1fl Nag p axrnbas Imp saw ag; pueq auo uo lunoo tiro l pue knunoo aq o no se Ham se awls Anna 0; drgs pup =A sad stpooq ;mud 000`S x2A0 am ;oeJnuew am) snp ;dame s1o;oadsur isoJ/ sun dna)gew np pup stpooq lured o; &urureixad sapoo pazruilooas X;;euopru tpinn aouepx000p tti sam;ownupw sgioog iCexds IaNiioO pue ratpoue o; ,Ciriedroruntu auo wag ICiaprnn saupn ssaoord 8utrtuxad ati - pals!! in axe tpoog iuted;amoD moIC girnn paddrgs sivauodwo3 pauleldxa 6 uPsIl In :Jawoisno g ;ooq Aexds ippuaiod xpaU J11.7all 4::10 Twin City Fan & Blower - Commercial Products Page 1 of 1 g Twin i Tw t 0:::y Fart & _ 1'„c'`+ R _`.oli' Home 1 About Us i Member Login I Contact Us I Site Map What's New TB - Tubeaxial Fan, Belt Driven Products Application Quick Ship Specifically designed for cost effective, reliable air movement in commercial and light industrial ducted and non - ducted Sales Reps applications. Available with cast aluminum or fabricated steel propellers to meet specific application requirements. Fan Services Fan Software "g Sizes 14° to 60" wheel diameters Engineering � Seminar Performance Literature Airflow from 1,950 to 82,600 CFM Employment Static pressure to 1.5" w.g. i ,. Industry Links Literature Tubeaxial Fan, Belt Driven (TB) Product Bulletin - Bulletin Parts 4830 Type 'E' Adjustable Pitch Propeller Operation and Maintenance wilco Manual - ES -404 =MO 43 3c a t�$ , limes , /sow) U. arcs : .14 ; ISO 9001 ] CERTIFIED 4 t° [ Back ] 404.66,9' , WebEx Meeting Room Copyright © 2009 Twin City Fan & Blower http:/ /www.tcf.com/TCFBlower/Products /Commercial /tubetb.asp 7/10/2009 TD/TB Tubeaxial Fans Twin City Fan & Blower TD and TB Tubeaxial Fans are specifically designed for cost effective, reliable air movement TB Belt Drive in commercial and light industrial ducted and non - ducted u%E' Cast applications. Direct and belt drive models are available with Alutninurrt cast aluminum or fabricated steel propellers to meet specific ,. application .requirements. Propeller Sizes and Performance • Direct drive sizes 14" to 48" • Belt driven sizes 14" to 60" • Capacities from 1,600 CFM to 82,600 CFM • Static pressures to 11/2" wg. Construction Features • Cast aluminum or fabricated steel propellers. • Continuously welded, heavy- gauge, corrosion resistant, enamel coated steel housing. • Heavy -gauge steel motor and bearing supports provide maximum strength with minimal resistance to airflow • Flanged housings with prepunched mounting holes can easily be connected to ductwork. • Dynamically balanced propellers for quiet, vibration -free operation. • Designed for continuous duty • Available with a wide variety of ODP, TEFC and explosion proof ball bearing motors. • Extended lube lines are standard on Model TB fans. ° T All models are UUcUL 705 listed,f C VL Us for electrical, File No. E158680. AMCCI Twin City Fan & Blower, a Twin CERTIFIED City Fan Company, certifies that 7D Direct Drive , y �D wo� RRTIRGf the TD and TB Tubeaxial Fans ;�' w/E' Ccut shown herein are licensed to bear Aluminum SOUfD the AMCA Seal. The ratings shown Propeller RIR °6 are based on tests and proce- ° " °" dures performed in accordance aIoremenr with AMCA Publication 211 and nabconnnot AMCA Publication 311 and comply a:roCiaflon Mi nnnTManr. ne* with the AMCA Certified Ratings Program. ©2006 Twin City Fan Companies, Ltd. All rights reserved throughout the world. Bulletin illustrations cover the general appearance of Twin City Fan & Blower products at the time of publication and we reserve the right to make changes in design and construction at any time without notice. 2 Twin City Bulletin 4830 Propellers Propeller Availability TD and 113 tubeaxial fans are available with either fixed pitch FAN SIZE DIRECT DRIVE BELT DRIVEN fabricated steel (sizes 24 through 60) or adjustable pitch cast 14 E E aluminum propellers (sizes 14 through 60). Each propeller 16 E E type is designed for a wide variety of commercial and light 18 E E industrial applications with static pressure capabilities from 0" 21 E E to 11/2". Regardless of the application requirement, '11) and 30 E E/Z TB propellers offer the right choice. 36 E E/Z 42 E E/Z 48 E E/Z 54 — C/Z 60 — C/Z "E" Die Cast Aluminum Propellers The "E" series features a die cast aluminum propeller a vailable in 4 and 8 blade designs. Blade angles are fac - to ry set and mounted in a die cast aluminum hub. "E" ' ;. .<" tea., =. propellers are available in 14" through 48" diameters. I "C" Cast Aluminum Propellers . ,: The "C" series is a cast aluminum propeller avail- ', e� - able in 4 and 6 blade designs, and is available in ,` - -'" 54" and 60" diameters only. Blade angles are fac- , tory set and mounted in a cast aluminum hub. „ gir l - "Z" Fabricated Steel Propeller The "Z" series features a fixed pitch, fabricated steel, 5- bladed propeller. Steel blades are continuously welded to a heavy gauge hub at the customer's selected blade angle. "Z" propellers are available in 24" through 60" diameters. Twin City Bulletin 4830 3 Accessories Belt Guard Shaft Seal Totally enclosed belt guard protects personnel from rotating Shaft seal consists of a non - asbestos rubbing ring at the wheel components by enclosing the motor sheaves and V -belt drive end of the inner cylinder. A shaft seal is recommended when assembly. (Model TB fans only.) the fan is exposed to wet, corrosive or dirty contaminants. The shaft seal does not make the fan gas tight. (Model TB Motor Cover fans only.) A weatherproof motor cover is available on belt driven mod- Spark Resistant Construction - Type B els to protect the motor and drive components. Motor covers also serve as an OSHA guard to protect personnel from rotat- Type B Spark Resistant Construction is available on belt driven ing parts and can easily be removed for inspection. (Model TB fans with the "E" or "C" cast aluminum propellers only. fans only) (Model TB fans only) Inlet Bell Vibration Isolators An inlet bell is recommended to minimize entrance losses for Rubber -in -shear and spring type isolators are available for installations where the inlet of the fan is non- ducted. Inlet bell floor and ceiling mounted installations. is flanged and punched to mate up with the standard flanged inlet. Special Coatings Inlet and Outlet Screen Twin City Fan & Blower has an in- house, specialty coating facility offering a wide range of protective coating solutions Inlet and outlet screens are available for added safety on non- for fans that are exposed to corrosive atmospheres. Fans are ducted applications. Screens are removable for routine inspec- coated with enamel as standard. tion and cleaning of the propeller. Disconnect Switch Companion Flange A NENLk 1, 3R or 7/9 safety disconnect switch is available Inlet and outlet companion flanges are available for ease of for positive electrical shutoff of the fan and the protection duct connection. Companion flanges are rolled angle rings of service personnel. Disconnects are shipped loose for field punched to match the standard inlet or outlet flange. mounting and wiring. Mounting Brackets Externally Mounted Conduit Box Mounted to fan housing. Location varies with discharge ori- Available on Model TD fans only. entation and mounting option. See page 5. Metal Nameplate Access Door, Bolted Available in aluminum or stainless steel. A bolted access door allows for inspection and maintenance of internal fan components. Engineering Data Material Specifications PROPELLERS (GAUGES) APPROX. SHIP WT. (LB) FAN HOUSING SHAFT Z SIZE TD TB SIZE (GAUGE) E C HUB I BLADE (IN.) W /ALUM W /STEEL W /ALUM W /STEEL PROP PROP PROP PROP 14 14 �"�' 1 33 N/A 40 N/A 16 14 53 N/A 67 N/A 18 14 60 N/A 75 N/A 21 14 1 85 N/A 104 N/A 24 14 DIE CAST 12 14 1 97 118 118 139 ALUMINUM 30 14 12 14 1 149 170 183 204 36 12 12 12 1 234 257 288 311 42 12 10 10 1'/16 305 325 375 395 48 12 10 10 1 547 565 664 682 54 12 CAST 7 10 1Vi6 N/A N/A 803 844 60 12 ALUMINUM 7 10 1 N/A N/A 895 933 4 Twin City Bulletin 4830 Mounting Arrangements :.:---- A 11' (-- I' A , , r I . G I � �, C ( G C I E Horizontal Base Mounted (HBM) Horizontal Ceiling Hung (HCH) Horizontal (HOR) (w /mounting brackets) (w /mounting brackets) (No mounting brackets) .1 i ° I I 4 ii I AIRFLOW ! ; - ,. I AIRFLOW 44 o o l AIRFLOW I !I Vertical Up Floor Mounted (VUI) Vertical Up Ceiling Hung (VUO) Vertical Up (VUN) (w /mounting brackets) (w /mounting brackets) (No mounting brackets) I r it 0 , AIRFLOW - - AIRFLOW 'I — a AIRFLOW I WON— me ■ , , : ° I — I F+ t_.. —4-' �-� ■ I I I I Vertical Down Floor Mounted (VDO) Vertical Down Ceiling Hung (VDI) Vertical Down (VDN) (w /mounting brackets) (w /mounting brackets) (No mounting brackets) Model Nomenclature TB- 24- E -4 -16 Model T — — — — TD = Direct Drive TB = Belt Driven Fan Size Propeller Type Z = Fabricated Steel, Fixed Pitch (5- Bladed) E = Die Cast Aluminum, Adjustable Pitch (4- and 8- Bladed) C = Cast Aluminum, Adjustable Pitch (3- and 6- Bladed) No. of Blades Propeller Blade Angle Twin City Bulletin 4830 3 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) SIZE BLADES NUMBER HP RPM Lw1A 0.000 I 0.125 I 0.250 0.375 0.500I0.625I 0.750 0.875 1.000 1.250 1.500 TD- 14E416 1/4 1160 70 CFM 1043 BHP 0.04 TD- 14E420 1/4 1160 69 CFM 1183 871 BHP 0.05 0.05 TD- 14E424 1/4 1160 71 CFM 1324 1015 BHP 0.06 0.07 TD- 14E428 1/4 1160 72 CFM 1418 1104 BHP 0.07 0.08 TD- 14E432 1/4 1160 70 CFM 1547 1193 4 BHP 0.09 0.09 BLADES TD- 14E416 1/4 1750 79 CFM 1573 1391 1132 BHP 0.14 0.15 0.16 TD- 14E420 1/4 1750 82 CFM 1785 1601 1390 BHP 0.16 0.18 0.19 TD- 14E424 1/4 1750 83 CFM 1997 1811 1604 BHP 0.20 0.22 0.23 TD- 14E428 1/4 1750 83 CFM 2138 1967 1743 BHP 0.25 0.25 0.26 TD- 14E432 1/3 1750 81 CFM 2334 2153 1892 14 BHP 0.29 0.30 0.31 TD- 14E816 1/4 1160 74 CFM 979 BHP 0.05 TD- 14E820 1/4 1160 74 CFM 1137 880 BHP 0.06 0.07 TD- 14E824 1/4 1160 76 CFM 1317 1074 BHP 0.08 0.09 TD- 14E828 1/4 1160 76 CFM 1444 1182 BHP 0.09 0.10 8 TD- 14E832 1/4 1160 77 CFM 1578 1286 BLADES BHP 0.11 0.12 TD- 14E816 1/4 1750 84 CFM 1477 1334 1133 BHP 0.18 0.19 0.20 TD- 14E820 1/4 1750 86 CFM 1715 1598 1401 BHP 0.21 0.23 0.24 TD- 14E824 1/3 1750 88 CFM 1986 1845 1677 BHP 026 0.28 0.29 TD- 14E828 1/3 1750 89 CFM 2179 2030 1847 BHP 0.31 0.33 0.34 T0- 14E832 1/2 1750 90 CFM 2380 2226 2020 BHP 0.38 0.40 0.40 TD- 16E416 1/4 1160 72 CFM 1494 1132 BHP 0.06 0.07 TD- 16E420 1/4 1160 72 CFM 1719 1361 BHP 0.07 0.08 TD- 16E424 1/4 1160 73 CFM 1920 1578 BHP 0.09 0.10 TD- 16E428 1/4 1160 72 CFM 2098 1750 BHP 0.11 0.12 TD- 16E432 1/4 1160 73 CFM 2294 1923 16 4 BHP 0.14 0.15 BLADES TD- 16E476 1/4 1750 83 CFM 2254 2063 1807 1383 BHP 0.20 0.22 0.24 0.22 TD- 16E420 1/3 1750 83 CFM 2594 2379 2132 1784 BHP 0.25 0.26 0.28 0.29 TD- 16E424 1/3 1750 83 CFM 2896 2706 2463 2139 BHP 0.31 0.33 0.35 0.36 CFM 3166 2959 2717 2396 TD- 16E428 1/2 1750 84 BHP 0.39 0.40 0.41 0.42 TD- 16E432 1/2 1750 82 CFM 3462 3259 2996 2625 BHP 0.47 0.49 0.50 0.50 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 4. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. 6 Twin City Bulletin 4830 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN LwiA STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM 0.000 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TD- 16E816 1/4 1160 75 CFM 1459 1177 BHP 0.08 0.09 TD- 16E820 1/4 1160 75 CFM 1691 1441 BHP 0.10 0.11 TD- 16E824 1/4 1160 75 CFM 1952 1709 BHP 0.12 0.14 TD- 16E828 1/4 1160 75 CFM 2181 1923 BHP 0.15 0.16 16 8 TD- 16E832 1/4 1160 78 CFM 2422 2136 BLADES BHP 0.18 0.20 TD- 16E816 1/3 1750 86 CFM 2202 2036 1840 BHP 0.27 0.29 0.31 TD- 16E820 1/2 1750 87 CFM 2552 2415 2239 1964 BHP 0.33 0.36 0.38 0.39 TD- 16E824 1/2 1750 87 CFM 2945 2805 2634 2398 BHP 0.41 0.44 0.46 0.48 TD- 16E828 3/4 1750 88 CFM 3290 3137 2958 2732 BHP 0.50 0.53 0.56 0.58 TD- 16E832 3/4 1750 90 CFM 3654 3485 3285 3029 BHP 0.62 0.65 0.68 0.69 CFM 1743 1301 TD- 18E412 1/4 1160 75 BHP 0.07 0.07 TD- 18E416 1/4 1160 75 CFM 2058 1690 BHP 0.08 0.10 TD- 18E420 1/4 1160 73 CFM 2394 1986 BHP 0.10 0.12 TD- 18E424 1/4 1160 75 CFM 2673 2322 BHP 0.13 0.15 TD- 18E428 1/4 1160 75 CFM 2971 2573 1876 BHP 0.16 0.18 0.18 TD- 18E432 1/4 1160 75 CFM 3250 2858 2171 4 BHP 0.21 0.22 0.21 BLADES TD- 18E412 1/4 1750 84 CFM 2630 2378 2074 1661 BHP 0.23 0.24 0.25 0.25 CFM 3104 2900 2640 2248 TD- 18E416 1/3 1750 86 BHP 0.29 0.30 0.32 0.33 18 TD- 18E420 1/2 1750 85 CFM 3612 3376 3089 2729 BHP 0.34 0.37 0.39 0.41 TD- 18E424 1/2 1750 85 CFM 4032 3836 3591 3219 2760 BHP 0.44 0.47 0.50 0.51 0.51 TD- 18E428 3/4 1750 86 CFM 4482 4237 3963 3649 3186 BHP 0.56 0.58 0.60 0.62 0.62 TD- 18E432 3/4 1750 86 CFM 4904 4677 4404 4014 3572 BHP 0.71 0.72 0.74 0.76 0.76 TD- 18E812 1/4 1160 75 CFM 1670 1331 BHP 0.09 0.10 TD- 18E816 1/4 1160 76 CFM 2075 1765 BHP 0.11 0.13 TD- 18E820 1/4 1160 78 CFM 2402 2140 8 BHP 0.14 0.16 BLADES TD- 18E824 1/4 1160 77 CFM 2768 2524 2083 BHP 0.18 0.20 0.21 TD- 18E828 1/4 1160 77 CFM 3133 2869 2468 BHP 0.22 0.25 0.27 TD- 18E832 1/3 1160 77 CFM 3523 3221 2781 BHP 0.28 0.31 0.33 NOTES: 1. Performance certified is for installation Type B: Free inlet. ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 4. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN LwiA STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM 0.000 0.125 0.250 10.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TD- 18E812 1/2 1750 86 CFM 2520 2325 2080 1826 1565 BHP 0.32 0.34 0.35 0.36 0.36 TD- 18E816 1/2 1750 87 CFM 3131 2940 2727 2479 2155 BHP 0.38 0.42 0.44 0.46 0.46 TD- 18E820 3/4 1750 89 18 8 CFM 3624 3470 3287 3041 2697 BHP 0.48 0.51 0.54 0.57 0.58 BLADES TD- 18E824 3/4 1750 89 CFM 4176 4030 3860 3647 3338 BHP 0.61 0.65 0.68 0.71 0.73 CFM 4727 4565 4383 4174 3918 3433 TD- 18E828 1 1750 89 BHP 0.76 0.81 0.85 0.89 0.92 0.93 TD- 18E832 1 1750 89 CFM 5315 5129 4921 4684 BHP 0.95 1.00 1.05 1.09 TD- 21E412 1/4 1160 75 CFM 2442 1882 BHP 0.10 0.11 TD- 21E416 1/4 1160 80 CFM 2967 2500 1635 BHP 0.12 0.14 0.14 TD- 21E420 1/4 1160 79 CFM 3506 2979 2183 BHP 0.15 0.18 0.18 TD- 21E424 1/4 1160 77 CFM 4009 3512 2819 BHP 0.20 0.23 024 TD- 21E428 1/3 1160 77 CFM 4451 3934 3304 BHP 0.27 0.29 0.30 TD- 21E432 1/2 1160 78 GEM 4906 4385 3680 4 BHP 0.34 0.36 0.38 BLADES TD- 21E412 1/3 1750 88 CFM 3684 3353 BHP 0.33 0.35 TD- 21E416 1/2 1750 90 CFM 4476 4198 3873 3462 2861 BHP 0.42 0.45 0.48 0.50 0.49 TD- 21E420 3/4 1750 89 CFM 5288 4944 4591 4214 3682 BHP 0.53 0.57 0.60 0.63 0.63 TD- 21E424 1 1750 87 CFM 6048 5743 5402 5006 4555 3859 BHP 0.70 0.75 0.79 0.81 0.83 0.82 TD- 21E428 1 1750 88 CFM 6715 6378 6030 5682 5279 4699 BHP 0.92 0.95 0.98 1.01 1.03 1.03 TD- 21E432 11/2 1750 89 CFM 7401 7078 6722 6316 5845 5281 21 BHP 1.18 1.21 1.24 1.27 1.29 128 TD- 21E812 1/4 1160 79 CFM 2344 1973 1536 BHP 0.15 0.16 0.17 TD- 21E816 1/4 1160 81 CFM 2964 2624 2183 BHP 0.18 0.20 0.22 TD- 21E820 1/3 1160 82 CFM 3543 3224 2771 BHP 0.22 026 0.28 TD- 21E824 1/3 1160 80 CFM 4132 3835 3446 • BHP 0.29 0.33 0.36 TD- 21E828 1/2 1160 81 CFM 4726 4403 4012 3218 BHP 0.37 0.42 0.45 0.45 8 TD- 21E832 3/4 1160 79 CFM 5310 4978 4572 3913 BLADES BHP 0.48 0.53 0.56 0.57 TD- 21E812 3/4 1750 90 CFM 3537 3311 3055 2773 2497 2158 BHP 0.51 0.53 0.54 0.56 0.57 0.57 TD- 21E816 3/4 1750 91 CFM 4471 4259 4027 3770 3477 3119 BHP 0.61 0.65 0.69 0.72 0.74 0.75 TD- 21E820 1 1750 93 CFM 5344 5148 4929 4678 4373 4004 3446 BHP 0.77 0.82 0.87 0.91 0.94 0.96 0.94 TD- 21E824 11/2 1750 93 CFM 6234 6048 5845 5620 5361 5049 4618 BHP 1.00 1.06 1.11 1.16 1.20 123 1.24 TD- 21E828 11/2 1750 91 CFM 7130 6926 6707 6468 6208 5915 5501 4706 BHP 1.28 1.35 1.41 1.47 1.52 1.57 1.60 1.50 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 4. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. 8 Twin City Bulletin 4830 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN LwiA ■ STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM 0.000 10.125 1 0.250 0.375 0.500 1 0.625 0.750 1 0.875 1 1.000 1 1.250 1 1.500 TD- 24E412 860 1/4 72 CFM 2432 1368 BHP 0.05 0.05 TD- 24E416 860 1/4 75 CFM 3033 2085 BHP 0.06 0.08 TD- 24E420 860 1/4 74 CFM 3634 2666 BHP 0.09 0.10 TD- 24E424 860 1/4 72 CFM 4242 3289 BHP 0.12 0.14 TD- 24E428 860 1/4 72 CFM 4706 3832 BHP 0.16 0.18 TD- 24E432 860 1/4 73 CFM 5218 4270 BHP 0.21 0.23 TD- 24E412 1160 1/4 81 CFM 3280 2558 BHP 0.12 0.13 TD- 24E416 1160 1/4 82 CFM 4091 3495 2607 BHP 0.16 0.18 0.19 TD- 24E420 1160 1/4 82 CFM 4901 4209 3399 _ 4 BHP 0.21 0.24 0.26 BLADES TD- 24E424 1160 1/3 79 CFM 5721 5016 4292 BHP 0.29 0.33 0.35 TD- 24E428 1160 1/2 83 CFM 6348 5681 5037 3936 BHP 0.40 0.43 0.45 0.45 TD- 24E432 1160 3/4 85 CFM 7038 6350 5611 4550 BHP 0.52 0.56 0.58 0.56 TD- 24E412 1750 1/2 93 CFM 4949 4526 4005 3478 2876 BHP 0.42 0.43 0.45 0.45 0.44 CFM 6172 5802 5393 4929 4338 TD- 24E416 1750 3/4 94 BHP 0.54 0.58 0.62 0.64 0.65 TD- 24E420 1750 1 94 CFM 7394 6891 6456 6064 5522 4777 BHP 0.72 0.78 0.83 0.86 0.88 0.87 _ 24 TD- 24E424 1750 11/2 89 CFM 8631 8157 7691 7245 6765 6216 5342 BHP 1.00 1.06 1.11 1.15 1.18 1.20 1.18 TD- 24E428 1750 11/2 91 CFM 9576 9128 8690 8274 7861 7355 6693 BHP 1.36 1.41 1.46 1.50 1.54 1.57 1.57 CFM 10617 10169 9709 9241 8761 8201 7507 TD- 24E432 1750 2 gq BHP 1.80 1.85 1.89 1.94 1.97 1.99 1.98 TD- 24E812 860 1/4 77 CFM 2338 1764 BHP 0.08 0.09 TD- 24E816 860 1/4 77 CFM 3005 2426 BHP 0.10 0.12 TD- 24E820 860 1/4 78 CFM 3694 3137 BHP 0.13 0.16 TD- 24E824 860 1/4 76 CFM 4355 3845 BHP 0.18 0.21 TD- 24E828 860 1/3 77 CFM 5022 4475 3550 BHP 0.23 0.27 029 TD- 24E832 860 1/2 76 CFM 5641 5121 4339 BHP 0.31 0.35 0.38 6 T0- 24E812 1160 1/4 84 CFM 3154 2747 2299 BLADES BHP 0.21 0.22 0.23 TD- 24E816 1160 1/3 84 CFM 4053 3687 3230 2571 BHP 0.25 0.28 0.30 0.32 CFM 4982 4598 4141 3519 TD- 24E820 1160 1/2 86 BHP 0.32 0.37 0.40 0.42 TD- 24E824 1160 3/4 86 CFM 5874 5514 5111 4605 BHP 0.43 0.49 0.53 0.56 TD- 24E828 1160 3/4 84 CFM 6773 6389 5954 5430 BHP 0.57 0.63 0.68 0.72 TD- 24E832 1160 1 83 CFM 7608 7245 6826 6320 5385 BHP 0.77 0.82 0.87 0.91 0.91 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 4. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 9 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM LwiA 0.000 1 0.125 0.250 0.375 0.500 ( 0.625 1 0.750 0.875 1.000 1.250 1.500 TD- 24E812 3/4 1750 95 C FM 4758 4500 4225 3923 3629 3321 BHP 0.71 0.73 0.76 0.77 0.79 0.79 TD- 24E816 1 1 750 96 CFM 6114 5884 5634 5361 5055 4720 4337 3767 BHP 0.87 0.92 0.97 1.00 1.03 1.06 1.09 1.08 TD- 24E820 11/2 1750 97 CFM 7516 7272 7012 6732 6428 6090 5695 5220 24 8 BHP 1.10 1.18 1.25 1.31 1.36 1.41 1.44 1.45 BLADES TD- 24E824 2 1750 97 CFM 8862 8630 8387 8132 7862 7585 7276 6861 BHP 1.49 1.58 1.66 1.73 1.80 1.85 1.89 1.92 TD- 24E828 3 1750 g5 CFM 10218 9972 9712 9439 9148 8844 8515 8112 7478 BHP 1.95 2.04 2.14 2.22 2.30 2.38 2.44 2.49 2.49 TD- 24E832 3 1750 94 CFM 11478 11246 11001 10740 10461 10161 9836 9467 8999 BHP 2.64 2.72 2.80 2.88 2.95 3.02 3.08 3.13 3.17 TD- 30E412 1/4 860 81 CFM 5284 4409 3183 BHP 0.25 0.25 0.26 TD- 30E416 1/3 860 83 CFM 6504 5653 4612 BHP 0.30 0.34 0.36 TD- 30E420 1/2 860 81 CFM 7566 6832 5875 BHP 0.39 0.44 0.47 TD- 30E424 3/4 860 80 CFM 8765 7981 7003 5545 BHP 0.52 0.57 0.61 0.60 TD- 30E428 3/4 860 79 CFM 9988 9048 8091 6580 BHP 0.66 0.73 0.76 0.77 TD- 30E432 1 860 S2 CFM 10852 9986 8938 7554 BHP 0.83 0.90 0.93 0.93 TD- 30E412 3/4 1160 89 CFM 7127 6512 5812 4932 3835 BHP 0.61 0.61 0.63 0.64 0.61 TD- 30E416 1 1160 90 CFM 8773 8149 7509 6796 5826 BHP 0.73 0.79 0.85 0.88 0.87 TD- 30E420 1Yi 1160 91 CFM 10206 9683 9107 8468 7459 6406 4 BHP 0.96 1.03 1.09 1.13 1.15 1.15 30 BLADES CFM 11823 11265 10649 9956 9108 8008 TD- 30E424 11/2 1160 88 BHP 1.27 1.34 1.41 1.46 1.50 1.50 CFM 13472 12781 12077 11391 10581 9357 8299 TD- 30E428 2 1160 87 BHP 1.63 1.73 1.81 1.85 1.88 1.89 1.87 CFM 14638 14018 13342 12589 11732 10722 9515 TD- 30E432 3 1160 90 BHP 2.05 2.14 2.21 2.27 2.29 2.29 2.26 CFM 10752 10358 9943 9505 9040 8534 7956 7333 6678 TD- 30E412 3 1750 101 BHP 2.09 2.10 2.11 2.12 2.14 2.17 2.20 2.21 2.17 TD- 30E416 3 1750 102 CFM 13235 12826 12410 11987 11563 11135 10678 10158 9567 8019 BHP 2.50 2.60 2.70 2.79 2.87 2.94 2.99 3.01 3.01 2.93 TD- 30E420 5 1750 101 CFM 15396 15059 14708 14342 13958 13558 13144 12693 12150 10554 BHP 3.29 3.40 3.50 3.60 3.68 3.77 3.84 3.90 3.95 3.96 TD- 30E424 5 1750 gg CFM 17836 17476 17101 16710 16300 15870 15417 14934 14408 13109 11621 BHP 4.37 4.48 4.58 4.68 4.78 4.87 4.95 5.02 5.08 5.18 5.13 TD- 30E812 1/2 860 82 CFM 5264 4770 4097 3301 BHP 0.44 0.45 0.47 0.46 TD- 30E816 3/4 860 83 CFM 6360 5863 5264 4480 BHP 0.49 0.54 0.57 0.58 TD- 30E820 3/4 860 85 CFM 7426 7021 6438 5376 8 BHP 0.58 0.64 0.68 0.71 BLADES CFM 9057 8500 7898 7210 TD- 30E824 1 860 85 BHP 0.75 0.82 0.89 0.96 TD- 30E828 11/2 860 83 CFM 10366 9914 9374 8639 7635 BHP 0.94 1.03 1.11 1.18 1.23 TD- 30E832 11/2 860 84 CFM 11637 11062 10419 9687 8716 BHP 1.18 1.29 1.38 1.44 1.49 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 4. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. 10 Twin City Bulletin 4830 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN LwA STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM 0.000 0.125 0250 1 0.375 10.500 0.625 0.750 0.875 1 1.000 1.250 1.500 TD- 30E812 11/2 1160 gg CFM 7100 6755 6357 5847 5357 4814 3991 BHP 1.07 1.09 1.12 1.14 1.15 1.14 1.10 TD- 30E816 11/2 1160 91 CFM 8578 8223 7835 7405 6916 6348 5595 BHP 1.20 1.27 1.33 1.38 1.41 1.42 1.41 TD- 30E820 2 1160 93 CFM 10017 9733 9408 9017 8436 7659 6668 BHP 1.42 1.50 1.57 1.64 1.70 1.73 1.73 TD- 30E824 3 1160 93 CFM 12216 11811 11387 10942 10488 9993 9347 8345 BHP 1.84 1.94 2.04 2.13 2.23 2.32 2.37 2.35 30 8 CFM 13983 13658 13306 12918 12478 11940 11287 10539 9556 BLADES TD- 30E828 3 1160 91 BHP 2.32 2.43 2.54 2.65 2.76 2.86 2.95 3.02 3.02 TD- 30E832 5 1160 92 CFM 15696 15279 14839 14370 13869 13332 12725 11992 BHP 2.90 3.04 3.18 3.30 3.41 3.50 3.58 3.65 TD- 30E812 5 1750 101 CFM 10712 10491 10258 10011 9746 9454 9117 8759 8425 7796 6950 BHP 3.67 3.71 3.75 3.78 3.82 3.85 3.89 3.92 3.94 3.96 3.88 CFM 12941 12711 12472 12225 11968 11699 11417 11119 10840 10114 9311 T0- 30E816 5 1 750 103 BHP 4.11 4.22 4.33 4.42 4.52 4.60 4.68 4.74 4.79 4.87 4.89 CFM 15111 14929 14738 14535 14319 14087 TD- 30E820 5 1750 104 BHP 4.88 5.00 5.11 5.23 5.34 5.44 TD- 36E412 1/2 860 84 CFM 7370 5968 4321 BHP 0.40 0.40 0.38 TD- 36E416 1/2 860 87 CFM 9167 8053 6473 BHP 0.47 0.53 0.53 TD- 36E420 3/4 860 87 CFM 11425 10342 8808 6497 BHP 0.61 0.69 0.73 0.72 TD- 36E424 1 860 85 CFM 13358 12183 10852 8814 BHP 0.82 0.90 0.98 0.99 TD- 36E428 11/2 860 83 CFM 15168 14059 12750 11128 BHP 1.08 1.18 1 26 1.30 TD- 36E432 11/2 860 84 CFM 16782 15617 14317 12694 BHP 1.39 1.50 1.57 1.61 CFM 9941 8848 7852 6623 5326 TD- 36E412 1 1160 92 BHP 0.98 0.96 0.97 0.96 0.94 TD- 36E416 11/2 1160 94 CFM 12364 11568 10703 9682 8147 BHP 1.15 1.125 1.30 1.31 1.29 36 4 TD- 36E420 2 1160 95 CFM 15411 14656 13780 12670 11406 9741 BHP 1.51 1.61 1.70 1.76 1.81 1.80 BLADES TD- 36E424 3 1160 97 CFM 18017 17169 16265 15307 14210 12762 10623 BHP 2.01 2.12 2.22 2.33 2.42 2.46 2.35 TD- 36E428 3 1160 91 CFM 20459 19663 18802 17858 16801 15616 14076 BHP 2.65 2.79 2.92 3.03 3.11 3.17 3.19 TD- 36E432 5 1160 94 CFM 22636 21793 20899 19948 18934 17757 16263 14156 BHP 3.42 3.57 3.70 3.81 3.88 3.93 3.97 3.83 TD- 36E412 5 1750 105 CFM 14998 14246 13536 12883 12239 11495 10659 9853 9035 BHP 3.35 3.31 3.30 3.31 3.33 3.33 3.31 3.27 3.23 TD- 36E416 5 1750 106 CFM 18653 18138 17604 17047 16470 15877 15234 14457 13466 11296 BHP 3.94 4.11 4.25 4.36 4.44 4.48 4.49 4.50 4.49 4.37 TD- 36E420 71/2 1750 109 CFM 23249 22766 22256 21714 21131 20492 19768 18975 18158 16348 13852 BHP 5.18 5.34 5.49 5.64 5.77 5.89 5.99 6.07 6.14 6.22 6.13 TD- 36E424 10 1750 105 CFM 27181 26629 26061 25478 24878 24259 23629 22979 22288 20655 18515 BHP 6.90 7.06 723 7.39 7.55 7.71 7.87 8.03 8.18 8.39 8.40 TD- 36E428 10 1750 104 CFM 30865 30348 29814 29262 28691 28097 27477 26828 26144 24661 23030 BHP 9.08 9.31 9.53 9.74 9.93 10.11 10.28 10.43 10.56 10.77 10.93 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 4. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 11 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM LwiA 0.000 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TD- 36E812 3/4 860 87 CFM 6990 6137 5298 4328 BHP 0.67 0.69 0.69 0.70 TD- 36E816 1 860 87 CFM 9166 8387 7549 6499 5281 BHP 0.77 0.82 0.86 0.89 0.91 TD- 36E820 11/2 860 80 CFM 11294 10698 9960 8923 7536 BHP 0.94 1.02 1.10 1.17 1.20 TD- 36E824 11/2 860 92 CFM 13857 13161 12342 11284 10025 BHP 1.19 1.32 1.43 1.53 1.57 TD- 36E828 2 860 88 CFM 15974 15354 14633 13727 12373 BHP 1.52 1.66 1.79 1.91 1.99 TD- 36E832 3 860 87 CFM 18105 17459 16715 15800 14520 BHP 2.03 2.21 2.36 2.48 2.54 TD- 36E812 2 1160 93 CFM 9428 8790 8166 7548 6914 6200 5444 4712 BHP 1.65 1.67 1.68 1.68 1.69 1.71 1.71 1.69 TD- 36E816 3 1160 94 CFM 12363 11795 11203 10591 9935 9157 8298 7384 BHP 1.89 1.97 2.04 2.09 2.13 2.17 2.21 2.22 8 CFM 15234 14809 14341 13817 13190 12415 11562 10535 36 BLADES TD- 36E820 3 1160 98 BHP 2.30 2.41 2.53 2.64 2.74 2.84 2.90 2.94 TD- 36E824 5 1160 100 CFM 18691 18191 17651 17060 16394 15612 14746 13817 BHP 2.92 3.09 3.26 3.42 3.57 3.70 3.80 3.86 TD- 36E828 5 1160 98 CFM 21546 21100 20621 20099 19521 18859 18064 17055 15368 BHP 3.73 3.92 4.11 4.29 4.46 4.62 4.77 4.88 4.85 TD- 36E832 7' /z 1160 95 CFM 24420 23955 23457 22918 22325 21657 20862 19890 18663 BHP 4.99 5.23 5.45 5.67 5.86 6.03 6.15 6.23 6.28 TD- 36E812 71/2 1750 107 CFM 14224 13799 13377 12959 12545 12137 11730 11315 10898 10034 9027 BHP 5.66 5.70 5.74 5.76 5.78 5.78 5.78 5.79 5.80 5.84 5.88 TD- 36E816 71/2 1750 108 CFM 18652 18279 17900 17515 17122 16721 16317 15907 15484 14552 13465 BHP 6.49 6.61 6.73 6.83 6.94 7.03 7.11 7.18 7.24 7.37 7.50 TD- 36E820 10 1750 109 CFM 22983 22707 22422 22124 21814 21488 21144 20780 20386 19461 18391 BHP 7.88 8.06 8.24 8.41 8.59 8.76 8.93 9.09 9.25 9.56 9.82 TD- 36E824 10 1750 108 CFM 28198 27873 27538 27191 BHP 10.02 10.29 10.55 10.81 TD- 42E412 11/2 860 92 CFM 13701 12433 11042 9311 BHP 1.20 1.21 1.23 1.25 TD- 42E416 2 860 92 CFM 16907 15708 14462 13039 BHP 1.43 1.56 1.65 1.70 TD- 42E420 3 860 93 CFM 20014 18981 17826 16504 14519 12390 BHP 1.88 2.02 2.13 2.22 2.26 2.24 TD- 42E424 3 860 91 CFM 23240 22124 20901 19541 17884 15703 BHP 2.50 2.64 2.76 2.88 2.96 2.97 TD- 42E428 5 860 89 CFM 26459 25165 23820 22466 20911 18644 BHP 3.22 3.42 3.58 3.67 3.73 3.76 TD- 42E432 5 860 92 CFM 28884 27676 26366 24924 23296 21352 18959 4 BHP 4.07 4.25 4.40 4.51 4.57 4.59 4.53 42 BLADES TD- 42E412 3 1160 99 CFM 18480 17558 16592 15584 14472 13175 11812 BHP 2.94 2.95 2.96 2.99 3.03 3.07 3.03 TD- 42E416 5 1160 100 CFM 22804 21926 20123 20099 19163 18129 16884 15391 BHP 3.50 3.69 3.85 3.99 4.09 4.17 4.18 4.14 TD- 42E420 71/2 1160 100 CFM 26996 26247 25456 24613 23713 22745 21632 20090 18393 BHP 4.61 4.80 4.98 5.14 528 5.40 5.50 5.55 5.55 TD- 42E424 7 1160 97 CFM 31347 30536 29686 28791 27843 26842 25755 24512 23012 BHP 6.13 6.32 6.50 6.68 6.84 6.99 7.13 7.24 7.31 TD- 42E428 10 1160 97 CFM 35689 34737 33766 32775 31765 30767 29734 28575 27095 BHP 7.89 8.18 8.43 8.66 8.84 8.96 9.06 9.14 9.21 TD- 42E432 10 1160 99 CFM 38960 38079 37161 36201 35192 BHP 9.98 10.24 10.47 10.68 10.87 NOTES: 1. Performance certified is for installation Type 8: Free inlet, ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301, 4. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. 12 Twin City Bulletin 4830 Performance Data - Direct Drive TD - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN STATIC PPESSURE (IN. W.G.) BLADES NUMBER HP RPM 0.000 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TD- 42E812 3 860 91 CFM 13489 12777 11965 10982 10054 BHP 2.09 2.13 2.18 2.21 2.23 TD- 42E816 3 860 93 CFM 16624 15907 15131 14279 13323 12204 10768 BHP 2.35 2.50 2.63 2.71 2.75 2.78 2.77 TD- 42E820 5 860 95 CFM 19679 19113 18470 17706 16622 15211 13503 BHP 2.80 2.96 3.10 3.24 3.36 3.44 3.46 TD- 42E824 5 860 96 CFM 24039 23266 22450 21581 20667 19659 18398 16578 BHP 3.61 3.82 4.01 4.21 4.39 4.57 4.68 4.67 TD- 42E828 71/2 860 94 CFM 27566 26931 26242 25483 24626 23589 22315 20779 18676 42 8 BHP 4.57 4.80 5.02 5.24 5.45 5.65 5.82 5.95 5.93 BLADES TD- 42E832 7 860 94 CFM 31022 30248 29425 28541 27581 26529 25328 23865 BHP 5.79 6.08 6.36 6.61 6.83 7.01 7.15 7.27 TD- 42E812 5 1160 gg CFM 18195 17680 17133 16544 15891 15155 14424 13749 13049 BHP 5.12 5.19 5.25 5.31 5.36 5.41 5.44 5.47 5.48 TD- 42E816 71/2 1160 101 CFM 22423 21900 21355 20787 20190 19561 18894 18179 17406 15586 BHP 5.77 5.98 6.18 6.35 6.50 6.61 6.68 6.72 6.77 6.82 TD- 42E820 10 1160 104 CFM 26544 26135 25700 25233 24724 24163 23515 22688 21670 19459 BHP 6.88 7.09 7.29 7.49 7.68 7.87 8.04 8.20 8.33 8.48 CFM 32424 31858 31276 30675 30055 29412 28748 28069 27360 TD- 42E824 10 1160 102 BHP 8.87 9.14 9.42 9.68 9.95 10.20 10.46 10.71 10.96 TD- 48E412 2 860 94 CFM 17470 15508 13704 11489 BHP 1.68 1.65 1.67 1.64 TD- 48E416 3 860 95 CFM 21729 20296 18734 16853 14039 BHP 1.97 2.15 2.24 2.25 2.21 TD- 48E420 3 860 96 CFM 27081 25722 24135 22115 19816 16697 BHP 2.59 2.77 2.93 3.03 3.10 3.08 CFM 31663 30137 28506 26777 24765 22074 TD- 48E424 5 860 93 BHP 3.45 3.64 3.83 4.02 4.17 4.22 TD- 48E428 5 860 92 CFM 35953 34520 32968 31260 29339 27184 BHP 4.54 4.80 5.03 5.22 5.35 5.46 TD 48E432 7y 860 93 CFM 39779 38262 36651 34935 33096 30933 28148 4 BHP 5.87 6.13 6.36 6.54 6.67 6.76 6.80 BLADES CFM 23564 22066 20681 19397 17905 16235 14614 12839 TD- 48E412 5 1160 100 BHP 4.11 4.06 4.05 4.08 4.08 4.05 3.97 3.95 TD- 48E416 71/2 1160 102 CFM 29309 28267 27174 26023 24830 23484 21680 19562 17355 BHP 4.84 5.09 5.30 5.44 5.50 5.51 5.52 5.46 5.34 TD- 48E420 7 1160 104 CFM 36528 35550 34498 33352 32067 30569 28943 27236 25285 BHP 6.36 6.61 6.84 7.06 7.24 7.39 7.51 7.60 7.64 TD- 48E424 10 1160 103 CFM 42708 41592 40438 39240 37997 36722 35374 33866 32097 27284 48 BHP 8.46 8.72 8.98 9.23 9.48 9.74 9.98 10.18 10.32 10.14 TD- 48E812 3 860 95 CFM 16569 15422 14300 13186 12043 10732 9397 BHP 2.83 2.87 2.89 2.89 2.91 2.94 2.93 TD- 48E816 5 860 96 CFM 21726 20705 19638 18536 17343 15918 14362 12707 BHP 3.24 3.38 3.50 3.59 3.66 3.74 3.80 3.82 CFM 26772 26006 25162 24211 23062 21648 20089 18144 TD- 48E820 5 860 gg BHP 3.94 4.15 4.35 4.55 4.73 4.89 5.00 5.05 CFM 32847 31946 30972 29904 28690 27262 25694 23980 TD- 48E824 7y2 860 100 BHP 5.01 5.32 5.62 5.89 6.15 6.37 6.54 6.63 8 TD- 48E828 10 CFM 37863 37061 36196 35253 34203 32992 31523 29606 26330 BLADES 860 100 BHP 6.40 6.74 7.07 7.38 7.69 7.97 8.22 8.39 8.29 TD- 48E832 10 860 97 CFM 42915 42077 41179 40204 39129 37909 36442 34641 32292 BHP 8.57 8.99 9.38 9.75 10.10 10.39 10.59 10.71 10.79 TD- 48E812 71/2 1160 102 CFM 22349 21494 20649 19813 18993 18170 17332 16486 15590 13537 11621 BHP 6.95 7.01 7.06 7.09 7,10 7.10 7.11 7.14 7.17 7.22 7.14 TD- 48E816 10 1160 104 CFM 29305 28555 27787 27001 26196 25381 24544 23654 22670 20442 18055 BHP 7.96 8.15 8.33 8.49 8.64 8.76 8.86 8.96 9.07 9.26 9.36 TD- 48E820 10 1160 106 CFM 36111 35554 34970 34353 33699 BHP 9.67 9.96 10.23 10.51 10.77 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Performance ratings do not include the effects of appurtenances (accessories). 3. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 4. Values shown are for inlet LwiA sound power levels for installation Type 6: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 5. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 13 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM LwiA 0.0001 0.125 0.250 0.375 I 0.500 I 0.625 I 0.750 0.875 1.000 1.250 1.500 TB- 14E432 1/4 1680 80 CFM 2105 1864 BHP 0.25 0.25 TB- 14E428 1/4 1780 81 CFM 2058 1884 1630 BHP 0.24 0.25 0.25 TB- 14E420 1/4 1994 82 CFM 1948 1815 1629 1366 BHP 0.22 0.23 0.25 0.25 TB- 14E432 1/3 1849 83 CFM 2317 2102 1821 BHP 0.33 0.33 0.33 TB- 14E428 1/3 1957 83 CFM 2262 2108 1910 BHP 0.32 0.33 0.33 TB- 14E420 1/3 2197 85 CFM 2146 2028 1879 1670 4 BHP 0.29 0.31 0.32 0.33 BLADES TB- 14E432 1/2 2116 86 CFM 2651 2469 2256 BHP 0.49 0.50 0.50 14 TB- 14E428 1/2 2242 87 CFM 2592 2460 2304 2102 BHP 0.48 0.49 0.50 0.50 TB- 14E420 1/2 2518 88 CFM 2460 2359 2242 2091 1903 1645 BHP 0.44 0.46 0.48 0.49 0.50 0.49 TB- 14E432 3/4 2422 90 CFM 3035 2878 2701 2500 BHP 0.73 0.74 0.75 0.75 TB- 14E428 3/4 2566 90 CFM 2966 2854 2726 2579 2390 BHP 0.72 0.73 0.74 0.75 0.75 TB- 14E420 3/4 2880 92 CFM 2814 2727 2630 2520 2380 2215 2034 BHP 0.66 0.69 0.70 0.72 0.74 0.75 0.75 TB- 14E832 1/4 1547 80 CFM 1954 1738 BHP 0.24 0.25 TB- 14E832 1/3 1702 83 CFM 2150 1968 8 BHP 0.32 0.33 BLADES TB- 14E832 1/2 1946 88 CFM 2458 2309 2023 BHP 0.48 0.50 0.49 TB- 14E832 3/4 2230 90 CFM 2816 2692 2522 BHP 0.73 0.74 0.75 T6- 16E432 1/4 1410 78 CFM 2655 2368 BHP 0.24 0.25 TB- 16E428 1/4 1500 79 CFM 2589 2348 1983 BHP 0.23 0.25 0.25 TB- 16E420 1/4 1710 82 CFM 2421 2234 1957 BHP 0.22 0.24 0.25 TB- 16E432 1/3 1550 81 CFM 2919 2668 2271 BHP 0.32 0.33 0.33 T8- 16E428 1/3 1651 82 CFM 2850 2637 2355 BHP 0.31 0.33 0.33 TB- 16E420 1/3 1882 84 CFM 2665 2499 2278 1977 BHP 0.29 0.31 0.33 0.33 TB- 16E432 1/2 1775 85 CFM 3342 3132 2848 BHP 0.48 0.49 0.50 16 4 TB- 16E428 1/2 1890 85 CFM 3262 3081 2864 2569 BLADES BHP 0.47 0.48 0.50 0.50 TB- 16E420 1/2 2154 88 CFM 3050 2909 2740 2511 2242 BHP 0.44 0.46 0.48 0.50 0.50 CFM 3826 3647 3432 3135 TB- 16E432 3/4 2032 89 BHP 0.72 0.74 0.75 0.75 TB- 16E428 3/4 2164 89 CFM 3735 3580 3404 3195 2919 BHP 0.70 0.72 0.74 0.75 0.75 TB- 16E420 3/4 2466 91 CFM 3492 3371 3234 3071 2859 2628 BHP 0.66 0.68 0.71 0.73 0.75 0.75 TB- 16E432 1 2237 91 CFM 4212 4052 3867 3638 3333 BHP 0.96 0.98 0.99 1.00 0.99 TB- 16E428 1 2382 92 CFM 4111 3972 3818 3643 3437 3163 BHP 0.93 0.96 0.98 0.99 1.00 1.00 TB- 16E420 1 2714 93 CFM 3843 3734 3614 3478 3315 3114 2905 2625 BHP 0.88 0.91 0.93 0.96 0.98 1.00 1.00 0.97 NOTES: 1. Performance certified is for installation Type 8: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type 8: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. 14 Twin City Bulletin 4830 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller SIZE BLADES NUMBER HP RPM NO. OF CATALOG MOTOR FAN I LwiA 0.000 0.125 0.250 0.375 STATIC OS 0 PRESSURE 0.625 O( 50 0.875 1.000 1.250 1.500 TB- 16E832 1/4 1270 78 CFM 2532 2276 BHP 0.24 0.25 TB- 16E832 1/3 1395 80 CFM 2782 2561 BHP 0.31 0.33 16 8 TB- 16E832 1/2 1600 84 CFM 3190 3008 2722 BLADES BHP 0.47 0.49 0.50 TB- 16E832 3/4 1830 87 CFM 3649 3495 3298 2933 BHP 0.70 0.73 0.75 0.74 TB- 16E832 1 2015 90 CFM 4018 3881 3716 3485 BHP 0.94 0.97 0.99 1.00 TB- 18E432 1/4 1208 78 CFM 3257 2914 BHP 0.24 0.25 T8- 18E428 1/4 1287 79 CFM 3163 2840 2359 BHP 0.22 0.24 0.25 TB- 18E420 1/4 1500 81 CFM 2955 2701 2321 BHP 0.21 0.24 0.25 TB- 18E432 1/3 1330 80 CFM 3586 3289 2764 BHP 0.32 0.33 0.33 TB- 18E428 1/3 1416 80 CFM 3481 3194 2802 BHP 0.30 0.32 0.33 TB- 18E420 1/3 1651 84 CFM 3252 3027 2719 2298 BHP 0.29 0.32 0.33 0.33 TB- 18E432 1/2 1523 84 CFM 4106 3859 3494 2954 BHP 0.48 0.49 0.50 0.49 T8- 18E428 1/2 1622 85 CFM 3987 3744 3446 3053 BHP 0.44 0.47 0.49 0.50 TB- 18E420 1/2 1892 88 CFM 3727 3536 3305 2989 2599 BHP 0.43 0.47 0.49 0.50 0.49 4 TB- 18E432 3/4 1743 87 CFM 4699 4489 4229 3819 3339 BLADES BHP 0.72 0.73 0.74 0.75 0.74 TB- 18E428 3/4 1855 88 CFM 4560 4352 4113 3821 3463 BHP 0.67 0.69 0.72 0.74 0.75 TB- 18E420 3/4 2163 91 CFM 4261 4097 3910 3683 3394 3074 BHP 0.64 0.69 0.72 0.74 0.75 0.74 18 TB- 18E432 1 1919 89 CFM 5174 4986 4766 4472 4054 3581 BHP 0.96 0.97 0.98 0.99 1.00 0.97 CFM 5022 4835 4627 4387 4096 3760 TB- 18E428 1 2043 92 BHP 0.89 0.92 0.95 0.97 1.00 1.00 TB- 18E420 1 2382 94 CFM 4693 4545 4382 4196 3966 3697 3407 BHP 0.86 0.91 0.95 0.98 1.00 1.00 0.99 TB- 18E432 11/2 2197 94 CFM 5923 5762 5582 5372 5097 4728 4363 BHP 1.44 1.45 1.47 1.48 1.49 1.50 1.49 TB- 18E428 11/2 2339 95 CFM 5749 5588 5414 5223 5007 4756 4473 BHP 1.33 1.37 1.40 1.43 1.46 1.49 1.50 TB- 18E420 11/2 2727 97 CFM 5372 5245 5108 4958 4792 4594 4364 3858 BHP 1.29 1.34 1.40 1.44 1.48 1.50 1.50 1.49 TB- 18E832 1/4 1065 75 CFM 3150 2833 BHP 0.23 0.25 TB- 18E832 1/3 1173 76 CFM 3470 3196 2675 BHP 0.31 0.33 0.33 TB-18E832 1/2 1344 81 CFM 3976 3748 3412 8 BHP 0.46 0.49 0.50 BLADES TB- 18E832 3/4 1538 85 CFM 4549 4357 4116 3721 BHP 0.69 0.72 0.74 0.75 TB- 18E832 1 1693 87 CFM 5008 4836 4632 4361 3932 BHP 0.92 0.95 0.98 1.00 0.99 TB- 18E832 11/2 1938 90 CFM 5733 5585 5419 5225 4971 4593 BHP 1.38 1.42 1.45 1.48 1.50 1.49 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 15 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN LwiA STATIC PRESSURE (IN. N.G.) BLADES TB- 21E432 1/4 8008 LwiA 0.375 0.500 0.62510.750I0.875I1.000 1.250 1.500 CFM 4121 3534 76 BHP 024 0.25 TB- 21E428 1/4 1077 76 CFM 4031 3482 BHP 0.23 0.25 TB- 21E420 1/4 1260 80 CFM 3723 3311 2732 BHP 0.22 0.24 0.25 TB- 21E432 1/3 1109 78 CFM 4534 4040 3264 BHP 0.31 0.33 0.33 TB- 21E428 1/3 1180 79 CFM 4417 3923 3300 BHP 0.30 0.32 0.33 TB- 21E420 1/3 1385 82 CFM 4093 3726 3263 BHP 029 0.32 0.33 TB- 21E432 1/2 1270 82 CFM 5192 4784 4154 BHP 0.47 0.49 0.50 TB- 21E428 1/2 1357 83 CFM 5079 4659 4179 3498 BHP 0.45 0.48 0.50 0.50 TB- 21E420 1/2 1586 86 CFM 4687 4373 4008 3540 BHP 0.43 0.47 0.49 0.50 TB- 21E432 3/4 1453 86 CFM 5940 5596 5141 4536 BHP 0.71 0.73 0.74 0.75 TB- 21E428 3/4 1551 86 CFM 5805 5444 5045 4586 4 BHP 0.68 0.71 0.73 0.75 BLADES TB- 21E420 3/4 1816 90 CFM 5366 5097 4797 4453 4019 BHP 0.65 0.69 0.72 0.74 0.75 CFM 6537 6230 5859 5326 4800 TB- 21E432 1 1599 88 BHP 0.94 0.97 0.99 1.00 1.00 CFM 6393 6067 5714 5330 4876 TB- 21E428 1 1708 90 BHP 0.90 0.94 0.96 0.99 1.00 21 TB- 21E420 1 1999 93 CFM 5907 5665 5400 5108 4772 4352 BHP 0.86 0.91 0.95 0.98 1.00 1.00 TB- 21E432 11/2 1832 91 CFM 7489 7227 6928 6562 6071 5617 BHP 1.41 1.44 1.47 1.49 1.50 1.50 TB- 21E428 11/2 1955 94 CFM 7318 7035 6736 6417 6076 5684 5198 BHP 1.35 1.39 1.43 1.46 1.48 1.50 1.49 TB- 21E420 11/2 2288 97 CFM 6761 6551 6328 6088 5827 5538 5199 4772 BHP 1.29 1.35 1.40 1.44 1.47 1.49 1.50 1.49 TB- 21E432 2 2015 94 CFM 8237 8001 7739 7441 7063 6606 6198 5684 BHP 1.88 1.91 1.94 1.97 1.99 2.00 2.00 1.96 TB- 21E428 2 2152 97 CFM 8055 7800 7532 7250 6955 6637 6279 5862 BHP 1.80 1.85 1.89 1.92 1.96 1.98 2.00 2.00 TB- 21E420 2 2519 100 CFM 7444 7254 7055 6844 6619 6378 6114 5814 5460 BHP 1.73 1.79 1.84 1.89 1.93 1.97 1.99 2.00 1.99 TB- 21E832 1/4 880 75 CFM 3969 3482 BHP 0.22 0.25 TB- 21E832 1/3 966 77 CFM 4357 3937 BHP 0.29 0.32 TB- 21E832 1/2 1106 81 CFM 4988 4639 4120 BHP 0.44 0.48 0.50 8 TB- 21E832 3/4 1268 83 CFM 5719 5424 5052 4493 BLADES BHP 0.66 0.71 0.74 0.75 TB- 21E832 1 1394 85 CFM 6287 6023 5710 5286 4719 BHP 0.88 0.93 0.97 1.00 1.00 TB- 21E832 1 1596 89 CFM 7198 6972 6717 6417 6022 5532 BHP 1.32 1.38 1.43 1.47 1.50 1.50 TB- 21E832 2 1757 92 CFM 7924 7721 7497 7245 6948 6565 6118 BHP 1.76 1.82 1.88 1.93 1.98 2.00 2.00 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. 16 Twin City Bulletin 4830 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN LwiA STATIC PRESSURE (IN. VV.G.) BLADES NUMBER HP RPM 0.000 1 0.125 1 0.250 0.375 1 0.500 I 0.625 I 0.750 I 0.875 I 1.000 1.250 1.500 TB- 24E432 1/3 950 77 CFM 5593 4825 BHP 0.30 0.33 TB- 24E424 1/3 1092 78 CFM 5290 4651 3851 BHP 0.28 0.32 0.33 TB- 24E416 1/3 1315 84 CFM 4679 4232 3641 BHP 0.29 0.32 0.33 TB- 24E432 1/2 1088 80 CFM 6405 5781 4910 BHP 0.46 0.49 0.50 TB- 24E424 1/2 1251 83 CFM 6060 5511 4899 4051 BHP 0.42 0.46 0.49 0.50 TB- 24E416 1/2 1506 88 CFM 5358 4979 4524 3899 BHP 0.43 0.47 0.49 0.50 TB- 24E432 3/4 1245 84 CFM 7329 6804 6089 5344 BHP 0.69 0.73 0.75 0.75 TB- 24E424 3/4 1432 87 CFM 6937 6463 5953 5366 4573 BHP 0.64 0.68 0.72 0.74 0.75 TB- 24E416 3/4 1724 92 CFM 6134 5808 5439 5003 4415 BHP 0.65 0.69 0.72 0.74 0.75 TB- 24E432 1 1372 86 CFM 8077 7610 7029 6305 5552 4 BHP 0.92 0.96 0.99 1.00 0.99 BLADES CFM 7629 7201 6746 6258 5665 4884 TB- 24E424 1 1575 90 BHP 0.85 0.90 0.94 0.97 0.99 0.99 TB- 24E416 1 1900 95 CFM 6760 6468 6145 5781 5349 4774 BHP 0.87 0.91 0.95 0.98 1.00 1.00 TB- 24E432 11/2 1570 90 CFM 9243 8842 8383 7799 7175 6581 24 BHP 1.37 1.43 1.47 1.49 1.50 1.50 TB- 24E424 11/2 1804 95 CFM 8739 8368 7979 7572 7139 6630 6011 5182 BHP 1.27 1.33 1.39 1.43 1.46 1.49 1.50 1.46 TB- 24E416 1 2175 99 CFM 7739 7486 7215 6919 6594 6223 5767 5181 BHP 1.30 1.35 1.40 1.44 1.48 1.50 1.50 1.49 TB- 24E432 2 1728 92 CFM 10173 9813 9413 8946 8362 7820 7282 BHP 1.83 1.89 1.94 1.98 2.00 2.00 2.00 CFM 9610 9275 8925 8561 8186 7782 7316 6768 6102 TB- 24E424 2 1984 97 BHP 1.69 1.76 1.82 1.88 1.92 1.95 1.98 2.00 1.97 CFM 8511 8282 8040 7782 7504 7200 6861 6459 5971 TB- 24E416 2 2392 101 BHP 1.73 1.79 1.84 1.89 1.93 1.97 1.99 2.00 1.99 TB- 24E432 3 1977 96 CFM 11639 11328 10992 10624 10201 9692 9188 8749 8241 BHP 2.74 2.81 2.88 2.93 2.97 2.99 2.99 3.00 2.99 TB- 24E424 3 2272 101 CFM 11006 10714 10413 10103 9783 9456 9115 8741 8319 7296 BHP 2.54 2.62 2.70 2.76 2.82 2.87 2.90 2.94 2.97 2.98 TB- 24E416 3 2738 105 CFM 9742 9544 9337 9120 8891 8650 8392 8114 7809 7052 BHP 2.59 2.66 2.73 2.79 2.84 2.89 2.93 2.96 2.99 3.00 TB- 24E832 1/3 814 76 CFM 5309 4705 BHP 0.28 0.32 TB- 24E832 1/2 931 80 CFM 6072 5569 4845 BHP 0.41 0.46 0.50 TB- 24E832 3/4 1066 84 CFM 6952 6527 5990 5239 BHP 0.62 0.68 0.73 0.75 8 TB- 24E832 1 1174 86 CFM 7657 7277 6827 6236 BLADES BHP 0.83 0.89 0.95 0.99 TB- 24E832 11/2 1344 89 CFM 8766 8440 8073 7641 7098 6427 BHP 1.24 1.32 1.39 1.44 1.49 1.49 TB- 24E832 2 1480 92 CFM 9653 9359 9037 8676 8250 7733 7125 BHP 1.66 1.74 1.82 1.89 1.95 1.99 1.99 TB- 24E832 3 1694 95 CFM 11048 10795 10523 10230 9907 9540 9113 8628 8062 BHP 2.49 2.58 2.68 2.76 2.84 2.91 2.96 2.99 2.98 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type 8: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 .17 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN LwiA STATIC PRESSURE (IN. \N.G.) BLADES NUMBER HP RPM 0.0001 0.125I0.250 0.37510.50010.6251 0.7501 0.87511.00011.2501 1.500 TB- 30E432 1/2 698 78 CFM 8511 7369 5859 BHP 0.45 0.49 0.49 TB- 30E424 1/2 809 80 CFM 7965 7170 5986 BHP 0.43 0.47 0.50 TB- 30E416 1/2 962 85 CFM 7118 6343 5501 4212 BHP 0.42 0.48 0.50 0.48 TB- 30E432 3/4 799 82 CFM 9742 8784 7580 BHP 0.68 0.72 0.75 TB- 30E424 3/4 925 84 CFM 9108 8440 7510 6396 BHP 0.65 0.69 0.73 0.75 TB- 30E416 3/4 1102 89 CFM 8154 7479 6803 5917 4744 BHP 0.64 0.70 0.74 0.75 0.72 TB- 30E432 1 881 85 CFM 10742 9889 8848 7683 BHP 0.91 0.96 1.00 1.00 TB- 30E424 1 1019 86 CFM 10033 9440 8688 7711 6630 BHP 0.86 0.91 0.96 1.00 1.00 CFM 8975 8363 7749 7085 6150 5036 TB- 30E416 1 1213 92 BHP 0.85 0.92 0.97 0.99 0.99 0.95 TB- 30E432 11/2 1008 89 CFM 12291 11559 10721 9741 8700 BHP 1.36 1.42 1.47 1.50 1.49 4 TB- 30E424 11/2 1167 91 CFM 11490 10984 10396 9635 8775 7845 BLADES BHP 1.30 1.35 1.41 1.47 1.50 1.50 TB- 30E416 11/2 1388 96 CFM 10270 9737 9195 8663 8057 7244 6320 5221 BHP 1.27 1.36 1.42 1.47 1.49 1.50 1.45 1.38 CFM 13522 12864 12135 11290 10390 9374 TB- 30E432 2 1109 92 BHP 1.81 1.88 1.93 1.98 2.00 1.98 TB- 30E424 2 1283 92 CFM 12632 12177 11665 11060 10295 9517 8664 7629 30 BHP 1.72 1.78 1.84 1.91 1.97 2.00 2.00 1.96 TB- 30E416 2 1527 99 CFM 11298 10814 10324 9836 9345 8759 8010 7185 6261 BHP 1.69 1.79 1.87 1.93 1.96 1.99 1.99 1.95 1.88 TB- 30E432 3 1270 96 CFM 15485 14917 14305 13634 12878 12088 11288 10163 BHP 2.72 2.80 2.86 2.93 2.98 3.00 2.99 2.94 TB- 30E424 3 1469 97 CFM 14464 14071 13644 13172 12623 11958 11276 10582 9813 BHP 2.58 2.65 2.72 2.79 2.87 2.94 2.99 3.00 2.99 TB- 30E416 3 1749 102 CFM 12941 12519 12093 11663 11239 10814 10342 9761 9086 7590 BHP 2.55 2.66 2.75 2.83 2.90 2.94 2.98 3.00 2.99 2.87 TB- 30E432 5 1505 100 CFM 18350 17876 17377 16849 16284 15665 15004 14339 13679 11817 BHP 4.53 4.62 4.70 4.78 4.85 4.92 4.97 5.00 4.99 4.87 TB- 30E424 5 1742 102 CFM 17152 16824 16478 16108 15711 15275 14769 14198 13619 12452 11111 BHP 4.31 4.39 4.48 4.56 4.64 4.72 4.81 4.90 4.96 5.00 4.98 TB- 30E416 5 2074 107 CFM 15346 14990 14633 14272 13909 13549 13195 12835 12449 11489 10332 BHP 4.24 4.38 4.50 4.61 4.71 4.79 4.85 4.90 4.95 5.00 4.96 TB- 30E832 1/2 602 76 CFM 7851 6962 5643 BHP 0.40 0.47 0.50 TB- 30E832 3/4 689 82 CFM 8986 8234 7289 BHP 0.61 0.68 0.73 TB- 30E832 1 759 83 CFM 9899 9228 8434 7387 BHP 0.81 0.90 0.96 1.00 8 TB- 30E832 11/2 869 87 CFM 11333 10758 10109 9351 8378 BLADES BHP 1.22 1.32 1.41 1.47 1.50 TB- 30E832 2 956 89 CFM 12468 11950 11380 10742 9989 9024 BHP 1.62 1.73 1.83 1.91 1.97 2.00 TB- 30E832 3 1095 93 CFM 14281 13834 13354 12834 12266 11621 10866 BHP 2.43 2.57 2.69 2.80 2.88 2.95 2.99 CFM 16929 16555 16163 15750 15311 14845 14344 13790 13166 TB- 30E832 5 1298 98 BHP 4.06 4.21 4.36 4.50 4.63 4.74 4.83 4.91 4.96 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. 18 Twin City Bulletin 4830 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) SIZE BLADES NUMBER HP RPM LwiA 0.000 1 0.125 0.250 0.375 1 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TB- 36E432 3/4 665 80 CFM 12735 11138 9009 BHP 0.64 0.72 0.74 TB- 36E428 3/4 716 80 CFM 12453 11018 9213 BHP 0.63 0.72 0.75 TB- 36E420 3/4 864 87 CFM 11322 10113 8582 6768 BHP 0.63 0.70 0.74 0.74 TB- 36E432 1 733 81 CFM 14037 12598 10960 BHP 0.86 0.94 0.99 CFM 13722 12444 10908 TB- 36E428 1 789 82 BHP 0.84 0.94 1.00 TB- 36E420 1 952 89 CFM 12475 11399 10088 8552 BHP 0.84 0.92 0.97 1.00 TB- 36E432 11/2 840 85 CFM 16086 14845 13530 11828 BHP 1.29 1.40 1.47 1.50 TB- 36E428 11/2 903 86 CFM 15705 14609 13365 11912 BHP 1.26 1.38 1.46 1.50 TB- 36E420 11/2 1089 gq CFM 14270 13348 12287 11052 9679 8052 BHP 1.25 1.35 1.42 1.47 1.50 1.47 TB- 36E432 2 924 88 CFM 17695 16573 15393 14095 12176 BHP 1.72 1.84 1.93 1.98 1.99 4 CFM 17288 16302 15213 13978 12557 TB- 36E428 2 994 89 BLADES BHP 1.68 1.82 1.92 1.98 2.00 TB- 36E420 2 1198 97 CFM 15699 14869 13946 12884 11710 10446 8964 BHP 1.67 1.77 1.86 1.93 1.98 1.99 1.96 TB- 36E432 3 1057 92 CFM 20242 19268 18249 17206 16024 14425 8HP 2.57 2.71 2.83 2.91 2.97 2.99 TB- 36E428 3 1137 93 CFM 19775 18922 18006 17008 15901 14688 BHP 2.52 2.68 2.81 2.91 2.97 3.00 TB- 36E420 3 1372 101 CFM 17979 17262 16490 15639 14691 13674 12580 11461 10024 36 2.50 2.63 2.73 2.83 2.90 2.96 3.00 2.98 2.93 TB- 36E432 5 1253 gg CFM 23995 23179 22337 21467 20589 19658 18547 17142 14878 BHP 4.29 4.45 4.60 4.73 4.83 4.92 4.98 4.99 4.75 CFM 23444 22733 21985 21194 20354 19452 18476 17444 TB- 36E428 5 1348 98 BHP 4.20 4.39 4.56 4.71 4.83 4.92 4.97 5.00 TB- 36E420 5 1627 105 CFM 21320 20722 20093 19426 18711 17933 17109 16244 15328 13436 BHP 4.18 4.32 4.46 4.58 4.69 4.78 4.86 4.93 4.99 4.97 TB-36E432 71/2 1435 102 CFM 27480 26770 26044 25299 24535 23770 22982 22115 21099 18243 BHP 6.44 6.63 6.81 6.97 7.11 7.23 7.34 7.42 7.48 7.35 TB- 36E428 71/2 1543 102 CFM 26836 26218 25576 24908 24211 23480 22710 21893 21028 19071 BHP 6.30 6.51 6.72 6.90 7.07 7.21 7.32 7.41 7.47 7.47 TB- 36E420 71/2 1862 108 CFM 24400 23880 23341 22778 22190 21569 20904 20202 19476 17930 16300 BHP 6.26 6.43 6.59 6.74 6.88 7.01 7.12 7.21 7.30 7.45 7.49 T8- 36E832 3/4 577 81 CFM 11770 10628 8622 BHP 0.60 0.69 0.74 TB- 36E832 1 635 81 CFM 12953 11946 10550 BHP 0.81 0.91 0.99 TB- 36E832 11/2 728 86 CFM 14850 13998 12950 11383 BHP 1.22 1.33 1.44 1.50 8 TB-36E832 2 800 90 CFM 16318 15555 14660 13533 11481 BLADES BHP 1.61 1.74 1.86 1.97 1.95 TB-36E832 3 916 93 CFM 18685 18029 17296 16450 15416 13786 BHP 2.42 2.57 2.71 2.84 2.96 2.97 TB-36E832 5 1086 97 CFM 22152 21607 21020 20380 19669 18859 17878 16401 BHP 4.03 4.21 4.38 4.54 4.70 4.85 4.97 4.96 TB- 36E832 71/2 1243 101 CFM 25355 24882 24384 23853 23285 22668 21992 21230 20323 17081 BHP 6.05 6.25 6.44 6.64 6.82 7.00 7.18 7.35 7.47 7.19 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 19 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. MG.) BLADES NUMBER HP RPM LwiA 0.0001 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TB- 42E432 1 518 80 CFM 16880 14675 11748 BHP 0.90 0.98 0.99 CFM 16438 14398 11907 TB- 42E428 1 554 81 BHP 0.88 0.96 1.00 TB- 42E420 1 654 85 CFM 14967 13439 11441 BHP 0.85 0.93 0.99 TB- 42E432 11/2 593 83 CFM 19323 17458 15169 BHP 1.35 1.44 1.50 TB- 42E428 11/2 634 84 CFM 18812 17037 15175 12336 BHP 1.32 1.41 1.49 1.49 TB- 42E420 11/2 748 89 CFM 17118 15820 14209 12344 BHP 1.27 1.36 1.45 1.50 TB- 42E432 2 653 88 CFM 21279 19611 17644 15340 BHP 1.80 1.90 1.98 2.00 CFM 20681 19074 17427 15406 TB- 42E428 2 697 87 BHP 1.75 1.86 1.95 2.00 CFM 18857 17697 16333 14707 12875 TB- 42E420 2 824 91 BHP 1.70 1.80 1.90 1.98 2.00 TB- 42E432 3 747 90 CFM 24342 22908 21301 19447 17368 BHP 2.69 2.81 2.92 2.99 2.98 CFM 23678 22281 20846 19376 17491 TB- 42E428 3 798 90 4 BHP 2.63 2.76 2.86 2.96 3.00 BLADES TB- 42E420 3 943 95 CFM 21581 20583 19472 18167 16728 15171 BHP 2.55 2.67 2.78 2.89 2.97 3.00 TB- 42E432 5 886 94 CFM 28871 27681 26398 24990 23427 21771 19717 BHP 4.49 4.64 4.77 4.89 4.98 5.00 4.94 TB- 42E428 5 947 95 CFM 28099 26928 25729 24518 23289 21852 20041 BHP 4.40 4.55 4.69 4.81 4.92 4.99 5.00 42 TB- 42E420 5 1117 100 CFM 25563 24732 23840 22868 21767 20560 19335 17993 16322 BHP 4.23 4.38 4.51 4.64 4.78 4.89 4.96 4.99 4.96 TB- 42E432 71/2 1014 98 CFM 33042 32011 30921 29761 28508 27150 25720 24214 22228 BHP 6.73 6.90 7.06 7.21 7.34 7.45 7.50 7.49 7.39 TB- 42E428 71/2 1083 99 CFM 32135 31113 30073 29015 27959 26891 25715 24317 22641 BHP 6.58 6.75 6.91 7.06 720 7.33 7.43 7.49 7.48 TB- 42E420 71/2 1279 104 CFM 29270 28551 27792 26987 26125 25171 24134 23070 21992 19458 BHP 6.36 6.52 6.68 6.83 6.98 7.13 7.27 7.38 7.45 7.48 CFM 36366 35433 34458 33433 32351 31191 29953 28657 27331 23706 TB- 42E432 10 1116 101 BHP 8.97 9.16 9.34 9.51 9.67 9.81 9.92 9.99 10.00 9.77 CFM 35369 34442 33502 32548 31581 30626 29655 28609 27405 24386 TB- 42E428 10 1192 102 BHP 8.77 8.97 9.15 9.32 9.48 9.63 9.77 9.89 9.96 9.95 TB- 42E420 10 1408 106 CFM 32222 31572 30893 30181 29432 28634 27764 26829 25863 23901 21581 BHP 8.48 8.66 8.83 9.01 9.18 9.34 9.51 9.66 9.80 9.96 9.99 CFM 15564 13876 11276 TB- 42E832 1 447 78 BHP 0.81 0.94 1.00 TB- 42E832 11/2 512 82 CFM 17827 16404 14588 BHP 1.22 1.37 1.48 TB- 42E832 2 563 85 CFM 19603 18332 16807 14723 BHP 1.62 1.79 1.92 1.99 8 TB- 42E832 3 645 88 CFM 22458 21369 20133 18670 16718 BLADES BHP 2.43 2.63 2.80 2.93 3.00 TB- 42E832 5 765 93 CFM 26636 25734 24752 23667 22442 20960 BHP 4.06 4.30 4.51 4.71 4.86 4.97 TB- 42E832 71/2 875 97 CFM 30466 29684 28853 27961 26994 25934 24725 23287 BHP 6.08 6.35 6.61 6.85 7.06 7.24 7.38 7.47 TB- 42E832 10 963 gg CFM 33530 32823 32081 31296 30461 29566 28599 27525 26284 BHP 8.10 8.40 8.69 896 9.22 9.45 9.64 9.81 9.92 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. 20 Twin City Bulletin 4830 Performance Data - Belt Driven TB - Die Cast Aluminum Propeller NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. N.G.) SIZE BLADES NUMBER HP RPM LwiA 0.000 0.125 0.250 0.375 ( 0.5001 0.625 0.750 1 0.875 1.000 1.250 1.500 TB- 48E432 11/2 520 82 CFM 23604 20888 17559 BHP 1.29 1.43 1.50 TB- 48E428 1 559 83 CFM 23045 20614 17625 BHP 1.26 1.42 1.50 TB- 48E420 11/2 674 89 CFM 20935 18887 16335 13357 BHP 1.25 1.38 1.47 1.49 TB- 48E432 2 572 86 CFM 25965 23515 20824 15748 BHP 1.72 1.88 1.98 1.88 TB- 48E428 2 615 84 CFM 25353 23180 20618 8HP 1.68 1.87 1.98 CFM 23047 21218 19026 16455 13536 TB- 48E420 2 742 92 BHP 1.67 1.82 1.93 2.00 1.97 TB- 48E432 3 655 87 CFM 29732 27616 25383 22709 BHP 2.58 2.77 2.92 3.00 CFM 29022 27156 25062 22641 TB- 48E428 3 704 88 BHP 2.52 2.74 2.90 2.99 4 TB- 48E420 3 849 95 CFM 26371 24800 23022 20957 18655 16196 BLADES BHP 2.50 2.67 2.82 2.92 2.99 2.96 CFM 35225 33455 31599 29696 27465 24305 TB- 48E432 5 776 93 BHP 4.29 4.53 4.73 4.87 4.97 4.96 CFM 34423 32873 31200 29371 27326 25051 TB- 48E428 5 835 93 BHP 4.20 4.48 4.70 4.87 4.98 5.00 TB- 48E420 5 1006 100 CFM 31247 29943 28530 26962 25216 23336 21331 19237 48 BHP 4.16 4.37 4.56 4.71 4.83 4.94 4.98 4.93 TB- 48E432 7 888 97 CFM 40309 38771 37177 35533 33858 31951 29530 25813 BHP 6.43 6.71 6.95 7.15 7.31 7.43 7.49 7.24 CFM 39370 38026 36605 35091 33464 31690 29793 27413 TB- 48E428 7'h 955 97 BHP 6.29 6.61 6.89 7.12 7.30 7.42 7.48 7.45 TB- 48E420 7 1153 104 CFM 35813 34685 33489 32212 30816 29299 27703 25998 24241 20103 BHP 6.26 6.51 6.73 6.94 7.11 7.25 7.37 7.47 7.50 7.34 TB- 48E432 10 977 99 CFM 44349 42955 41520 40040 38542 37000 35255 33133 30349 BHP 8.56 8.87 9.15 9.39 9.60 9.76 9.89 9.97 9.88 TB- 48E428 10 1052 100 CFM 43369 42155 40885 39549 38138 3663735022 33314 31426 BHP 8.41 8.76 9.08 9.36 9.60 9.78 9.92 9.99 10.00 CFM 39416 38397 37327 36201 35004 33710 32327 30889 29368 26186 22427 TB- 48E420 10 1269 107 BHP 8.35 8.62 8.87 9.11 9.32 9.50 9.65 9.79 9.92 9.99 9.80 TB- 48E832 1 450 81 CFM 21758 19832 16867 BHP 1.21 1.37 1.50 TB- 48E832 2 495 83 CFM 23934 22228 19967 BHP 1.61 1.79 1.96 TB- 48E832 3 566 87 CFM 27367 25914 24165 21780 8 BHP 2.41 2.62 2.82 2.97 BLADES TB- 48E832 5 672 94 CFM 32492 31297 29953 28387 26422 22950 BHP 4.03 4.28 4.52 4.75 4.95 4.88 TB- 48E832 7 770 98 CFM 37230 36201 35080 33840 32434 30765 28437 24017 BHP 6.06 6.35 6.63 6.91 7.17 7.41 7.49 7.04 TB- 48E832 10 847 100 CFM 40953 40024 39029 37954 36773 35455 33926 31960 28698 BHP 8.06 8.39 8.70 9.01 9.30 9.59 9.85 9.98 9.75 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 21 Performance Data - Belt Driven TB - Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. N.G.) BLADES NUMBER HP RPM Lwi4 0.000 1 0.1251 0.250 1 0.375 0.500 0.625 0.750 0.8751 1.000 1 1.250 1.500 TB- 54C320 11/2 525 78 CFM 28592 23237 16476 BHP 1.45 1.50 1.39 TB- 54C310 11/2 659 83 CFM 26598 22728 18559 BHP 1.37 1.44 1.49 TB- 54C320 2 578 82 CFM, 31478 26659 21485 BHP 1.93 2.00 1.93 CFM 29262 25910 21957 17198 TB- 54C310 2 725 88 BHP 1.82 1.89 1.97 1.98 TB- 54C320 3 661 85 CFM 35999 31838 27468 22064 BHP 2.89 2.96 2.97 2.82 TB- 54C310 3 830 93 CFM 33500 30678 27047 23986 19367 4 BHP 2.73 2.81 2.92 2.98 2.96 BLADES TB- 54C320 5 784 90 CFM 42697 39226 35561 31911 27470 BHP 4.82 4.91 4.99 4.93 4.75 TB- 54C310 5 984 98 CFM 39715 37402 34681 31527 29013 25618 21160 BHP 4.55 4.64 4.76 4.89 4.96 5.00 4.79 TB- 54C320 71/2 897 93 CFM 48852 45834 42697 39438 36279 32544 27003 BHP 7.21 7.33 7.42 7.49 7.38 7.18 6.87 TB- 54C310 71/2 1061 100 CFM 42823 40697 38300 35345 32777 30404 26847 22684 BHP 5.70 5.80 5.92 6.07 6.17 6.23 6.26 6.00 TB- 54C320 10 988 96 CFM 53807 51077 48263 45338 42384 39529 36113 31474 BHP 9.64 9.76 9.87 9.98 9.98 9.83 9.61 9.30 CFM 57783 55245 52641 49953 47193 44492 41793 38477 34160 TB- 54C320 15 1061 98 BHP 11.94 12.07 12.19 12.31 12.39 12.32 12.12 11.88 11.55 54 TB- 54C625 1'h 394 74 CFM 27948 23724 BHP 1.41 1.49 TB- 54C620 11/2 440 78 CFM 27067 23182 17724 BHP 1.31 1.45 1.49 TB- 54C610 11/2 543 85 CFM 24164 21658 18107 13665 BHP 1.19 1.34 1.45 1.49 TB- 54C625 2 434 78 CFM 30785 26978 21638 • BHP 1.88 1.99 1.96 CFM 29774 26376 21994 TB- 54C620 2 484 80 BHP 1.75 1.91 1.99 TB- 54C610 2 597 86 CFM 26566 24364 21131 17975 BHP 1.58 1.75 1.90 1.97 TB- 54C625 3 496 gg CFM 35183 31885 28262 22728 BHP 2.81 2.95 2.99 2.88 6 CFM 34080 31211 27568 23418 TB- 54C620 3 554 84 BLADES BHP 2.62 2.81 2.96 2.99 TB- 54C610 3 683 91 CFM 30394 28533 26073 23187 20294 15914 BHP 2.37 2.56 2.75 2.88 2.96 2.92 TB- 54C625 5 589 88 CFM 41780 39039 36156 32850 27962 BHP 4.71 4.88 4.98 5.00 4.86 TB- 54C620 5 657 90 CFM 40417 38063 35333 32079 28718 23384 BHP 4.38 4.60 4.80 4.95 4.99 4.83 TB- 54C610 5 811 96 CFM 36090 34567 32804 30477 28021 25855 22885 19116 BHP 3.96 4.19 4.42 4.63 4.80 4.90 5.00 4.91 TB- 54C625 71/2 674 91 CFM 47809 45431 42936 40391 37318 32878 BHP 7.06 7.26 7.41 7.49 7.48 7.31 TB- 54C620 71/2 752 93 CFM 46261 44236 41996 39399 36520 33651 29433 BHP 6.56 6.82 7.06 7.28 7.43 7.48 7.40 TB- 54C610 71/2 928 gg CFM 41296 39986 38533 36870 34703 32516 30650 28573 25742 BHP 5.94 6.20 6.46 6.72 6.96 _ 7.15 7.28 7.39 _ 7.49 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. 22 Twin City Bulletin 4830 Performance Data - Belt Driven TB - Cast Aluminum Propeller SIZE NO. OF I CATALOG I MOTOR I FAN I LwiA I I I I ( STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM 0.000 0.125 0.250 0.375 I 0.500 0.625 I 0.750 I 0.875 1.000 I 1.250 I 1.500 TB- 54C625 10 742 95 CFM 52632 50482 48245 45947 43569 40523 36408 32887 BHP 9.42 9.65 9.83 9.95 10.00 9.97 9.77 9.57 TB- 54C620 10 828 96 CFM 50936 49112 47136 44951 42436 39827 37225 33741 29250 BHP 8.76 9.05 9.32 9.57 9.79 9.93 9.99 9.93 9.64 TB- 54C610 10 1021 102 CFM 45434 44254 42972 41556 39909 37841 35868 34166 32408 27432 54 6 BHP 7.91 8.20 8.49 8.77 9.04 9.31 9.51 9.66 9.78 9.99 BLADES TB- 54C625 15 849 97 CFM 60222 58351 56424 54435 52428 50369 48009 44749 41213 BHP 14.11 14.38 14.60 14.78 14.91 14.98 14.98 14.84 14.61 TB- 54C620 15 948 100 CFM 58318 56739 55065 53275 51326 49143 46845 44611 42288 35134 BHP 13.15 13.48 13.80 14.10 14.38 14.64 14.84 14.95 14.99 14.66 TB- 54C610 15 1061 104 CFM 47214 46082 44860 43525 42025 40150 38129 36408 34784 30653 24944 BHP 8.87 9.18 9.48 9.77 10.06 10.34 10.58 10.76 10.90 11.16 10.98 TB- 60C325 2 477 78 CFM 34251 28689 BHP 2.00 1.97 CFM 34332 29236 21075 TB- 60C320 2 522 82 BHP 1.096 2.00 1.87 TB- 60C310 2 652 91 CFM 32995 28449 22850 BHP 1.82 1.94 1.98 TB- 60C325 3 546 82 CFM 39206 34459 27969 BHP 2.99 2.98 2.86 TB- 60C320 3 597 87 CFM 39265 34983 29417 BHP 2.92 2.99 2.95 TB- 60C310 3 747 95 CFM 37803 33903 29456 24314 BHP 2.74 2.88 3.00 2.94 TB- 60C325 5 647 86 CFM 46458 42539 38154 31511 4 BHP 4.98 4.98 4.90 4.70 60 BLADES TB- 60C320 5 708 89 CFM 46566 43069 38931 33822 25324 BHP 4.88 4.97 4.98 4.90 4.49 TB- 60C310 5 886 99 CFM 44837 41602 38104 34128 29762 BHP 4.57 4.73 4.91 5.00 4.93 TB- 60C325 71/2 741 89 CFM 53208 49832 46172 41962 35534 BHP 7.48 7.50 7.44 7.31 7.04 TB- 60C320 71/2 811 gg CFM 53340 50341 46970 43048 38410 31319 BHP 7.33 7.45 7.50 7.46 7.36 6.93 TB- 60C310 71/2 955 101 CFM 48329 45344 42152 38685 34648 30703 BHP 5.72 5.90 6.08 625 6.24 6.12 TB- 60C325 10 815 91 CFM 58521 55474 52205 48721 44351 37710 BHP 9.95 9.98 9.94 9.83 9.64 9.27 TB- 60C320 10 892 96 CFM 58668 55966 53004 49676 45889 41446 34823 BHP 9.76 9.89 9.97 9.96 9.89 9.76 9.25 TB- 60C325 15 933 96 CFM 66994 64354 61572 58645 55551 51835 46901 BHP 14.93 14.96 14.95 14.88 14.73 14.53 14.21 CFM 62811 60301 57588 54604 51262 47531 43001 36380 TB- 60C320 15 955 98 BHP 11.97 12.12 12.21 12.24 12.19 12.10 11.88 11.26 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 23 Performance Data - Belt Driven TB - Cast Aluminum Propeller SIZE NO. OF CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) BLADES NUMBER HP RPM LwiA 0.0001 0.125 0.250 0.375 0.5001 0.625 0.7501 0.8751 1.0001 1.250 1.500 TB- 600625 2 392 80 CFM 34877 29367 BHP 1.88 1.99 TB- 600620 2 427 82 CFM 34113 29413 23681 BHP 1.78 1.94 1.97 TB- 600610 2 537 86 CFM 31534 27838 23488 18010 BHP 1.61 1.82 1.97 1.97 TB- 600625 3 449 84 CFM 39948 35284 29781 BHP 2.82 2.97 2.98 TB- 600620 3 489 87 CFM 39066 34930 30718 BHP 2.68 2.86 2.99 TB- 600610 3 615 90 CFM 36115 32939 29397 25259 20217 BHP 2.41 2.66 2.87 2.99 2.95 TB- 600625 5 532 90 CFM 47333 43495 39122 34292 BHP 4.69 4.88 4.99 4.94 TB- 600620 5 580 92 CFM 46336 42847 39432 35649 29733 BHP 4.47 4.69 4.88 5.00 4.84 TB- 600610 5 729 95 CFM 42809 40169 37330 34233 30744 26852 21659 BHP 4.02 4.32 4.59 4.81 4.96 4.98 4.80 TB- 600625 71/2 609 94 CFM 54183 50876 47248 43214 38922 BHP 7.03 7.27 7.43 7.49 7.39 6 TB- 600620 71/2 664 96 CFM 53047 49999 46965 44006 40553 35838 60 BLADES BHP 6.70 6.96 7.19 7.40 7.50 7.37 TB- 600610 71/2 835 99 CFM 49034 46748 44336 41776 39027 36006 32725 29078 24038 BHP 6.04 6.39 6.70 7.00 7.25 7.43 7.50 7.45 7.16 TB- 600625 10 670 96 CFM 59611 56627 53419 49905 46163 42073 BHP 9.36 9.63 9.83 9.95 9.96 9.80 TB- 600620 10 731 99 CFM 58400 55631 52863 50170 47398 44109 39801 BHP 8.94 9.23 9.49 9.74 9.94 10.00 9.86 TB- 600610 10 919 102 CFM 53966 51899 49739 47475 45090 42546 39791 36838 33670 BHP 8.06 8.44 8.79 9.13 9.44 9.70 9.89 9.99 9.98 TB- 600625 15 767 100 CFM 68241 65655 62928 60028 56910 53634 50302 46053 BHP 14.05 14.36 14.62 14.81 14.94 14.95 14.84 14.49 TB- 600620 15 837 103 CFM 66868 64450 62032 59621 57289 54895 52174 49048 44884 BHP 13.42 13.76 14.07 14.36 14.64 14.87 15.00 14.98 14.74 TB- 600610 15 955 103 CFM 56080 54094 52026 49867 47605 45214 42648 39892 36974 29810 BHP 9.04 9.44 9.81 10.16 10.49 10.78 11.01 11.17 11.22 10.94 TB- 600625 20 845 103 CFM 75180 72844 70405 67849 65142 62273 59292 56306 52875 BHP 18.78 19.13 19.43 19.68 19.87 19.99 20.00 19.90 19.64 TB- 600620 20 921 105 CFM 73579 71381 69184 66987 64818 62707 60526 58099 55393 47721 BHP 17.88 18.26 18.61 18.93 19.24 19.54 19.81 19.97 20.00 19.43 TB- 600625 25 910 104 CFM 80964 78801 76557 74222 71782 69208 66512 63739 60974 54001 BHP 23.46 23.84 24.17 24.46 24.69 24.87 24.97 24.97 24.87 24.10 TB 600620 25 955 106 CFM 76295 74176 72057 69938 67830 65788 63728 61521 59045 52980 BHP 19.94 20.33 20.69 21.03 21.36 21.67 21.97 22.19 22.30 22.07 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. 24 Twin City Bulletin 4830 Performance Data - Belt Driven TB - Fabricated Steel Propeller SIZE CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) LwiA NUMBER HP RPM 0.000 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TB- 24Z545 1/3 751 76 CFM 5810 4901 BHP 0.31 0.33 TB- 24Z535 1/3 876 78 CFM 5237 4780 4027 BHP 0.28 0.31 0.33 TB- 24Z545 1/2 860 80 CFM 6654 5818 BHP 0.47 0.49 TB- 24Z535 1/2 1002 82 CFM 5990 5608 5065 4270 BHP 0.41 0.45 0.48 0.50 TB- 24Z545 3/4 984 83 CFM 7613 6852 6238 BHP 0.71 0.74 0.75 TB-24Z535 3/4 1148 85 CFM 6863 6539 6141 5559 4817 BHP 0.62 0.67 0.71 0.74 0.75 CFM 8387 7686 7119 24 TB-24Z545 1 1084 S8 BHP 0.94 0.98 1.00 TB-24Z535 1 1263 87 CFM 7550 7260 6921 6482 5898 BHP 0.83 0.88 0.92 0.96 0.99 TB-24Z545 11/2 1240 89 CFM 9594 8971 8426 7957 BHP 1.41 1.46 1.48 1.50 TB-24Z535 11/2 1446 91 CFM 8644 8395 8117 7797 7389 6876 6341 BHP 1.24 1.30 1.35 1.40 1.45 1.48 1.50 CFM 10569 9998 9475 9044 8577 TB-24Z545 2 1366 91 BHP 1.89 1.94 1.97 1.99 2.00 TB-24Z535 2 1591 93 CFM 9511 9286 9042 8770 8457 8061 7591 7119 BHP 1.65 1.72 1.78 1.84 1.94 1.89 1.97 1.99 TB-24Z545 3 1563 95 CFM 12093 11588 11118 10688 10322 9929 BHP 2.83 2.89 2.93 2.96 2.99 3.00 CFM 10886 10692 10485 10262 10020 9751 9431 9047 8631 7694 TB-24Z535 3 1821 97 BHP 2.48 2.55 2.62 2.69 2.76 2.82 2.88 2.92 2.96 2.99 TB- 30Z545 1/2 664 79 CFM 8878 7437 BHP 0.47 0.50 TB- 30Z535 1/2 791 82 CFM 8218 7394 6251 BHP 0.42 0.47 0.50 T8- 30Z545 3/4 760 83 CFM 10162 9014 BHP 0.71 0.74 TB- 30Z535 3/4 905 84 CFM 9403 8706 7809 6682 BHP 0.63 0.69 0.72 0.75 TB-30Z545 1 837 85 CFM 11192 10190 8626 BHP 0.95 0.99 0.99 TB- 30Z535 1 996 89 CFM 10348 9726 8976 8038 BHP 0.84 0.90 0.95 0.98 30 TB-30Z545 1Y2 958 89 CFM 12809 11967 10845 BHP 1.42 1.47 1.50 TB-30Z535 11/2 1141 91 CFM 11855 11322 10718 9991 9155 8118 BHP 1.26 1.33 1.40 1.45 1.48 1.50 CFM 14080 13328 12404 11105 TB- 30Z545 2 1053 92 BHP 1.89 1.94 1.98 1.99 CFM 13039 12559 12030 11428 10713 9945 8993 TB-30Z535 2 1255 93 BHP 1.68 1.76 1.83 1.89 1.94 1.98 2.00 TB-30Z545 3 1207 95 CFM 16139 15497 14759 13851 12652 BHP 2.84 2.90 2.95 2.99 2.99 TB-30Z535 3 1436 97 CFM 14920 14505 14059 13575 13034 12414 11747 11056 10122 BHP 2.52 2.61 2.70 2.78 2.84 2.89 2.94 2.98 2.99 TB-30Z545 5 1431 100 CFM 19134 18602 18019 17368 16608 15674 14565 BHP 4.73 4.81 4.87 4.93 4.98 5.00 4.94 TB-30Z535 5 1592 100 CFM 16541 16169 15775 15356 14905 14406 13848 13249 12643 BHP 3.43 3.53 3.63 3.72 3.81 _ 3.88 3.94 3.99 _ 4.04 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for net LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 ')5 Performance Data - Belt Driven TB - Fabricated Steel Propeller CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) SIZE NUMBER HP RPM LwiA 0.000 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TB- 36Z545 3/4 561 80 CFM 12962 10939 BHP 0.71 0.75 TB-36Z535 3/4 668 83 CFM 11993 10826 9217 BHP 0.63 0.70 0.74 TB- 36Z545 1 617 83 CFM 14256 12535 BHP 0.94 0.99 TB-36Z535 1 735 84 CFM 13196 12160 10804 9003 BHP 0.84 0.92 0.97 1.00 TB-36Z545 11/2 707 86 CFM 16335 14919 12742 BHP 1.42 1.48 1.49 TB-36Z535 Ph 842 90 CFM 15117 14235 13183 11862 BHP 1.26 1.35 1.43 1.48 36 TB-36Z545 2 778 89 CFM 17976 16724 15008 BHP 1.89 1.96 2.00 B- 362535 2 926 92 CFM 16625 15834 14931 13826 12576 BHP 1.68 1.78 1.87 1.93 1.98 TB-36Z545 3 890 93 CFM 20563 19499 18203 16401 BHP 2.83 2.91 2.97 2.99 TB-36Z535 3 1060 94 CFM 19031 18350 17601 16754 15753 14665 13410 BHP 2.52 2.64 2.74 2.83 2.90 2.96 3.00 TB-36Z545 5 1056 97 CFM 24399 23524 22534 21361 19852 17929 BHP 4.73 4.82 4.90 4.97 5.00 4.88 TB-36Z535 5 1257 99 CFM 22568 22001 21396 20746 20036 19230 18339 17420 16431 BHP 4.20 4.34 4.47 4.60 4.71 4.79 4.86 4.93 4.99 TB-36Z545 71/2 1208 101 CFM 27911 27156 26331 25413 24350 23053 21510 BHP 7.09 7.19 7.29 7.37 7.44 7.49 7.42 TB-42Z545 1 448 79 CFM 17696 15262 BHP 0.92 0.99 _ CFM 15342 14089 12275 TB-42Z530 1 593 84 BHP 0.78 0.88 0.97 TB- 42Z545 11 512 82 CFM 20225 18208 BHP 1.38 1.46 TB-42Z530 11/2 679 88 CFM 17567 16508 15149 13431 BHP 1.17 1.28 1.40 1.48 CFM 22279 20499 18085 T8- 42Z545 2 564 85 BHP 1.84 1.94 2.00 CFM 19301 18352 17224 15705 14171 TB-42Z530 2 746 91 BHP 1.56 1.68 1.80 1.92 1.98 42 TB-42Z545 3 645 88 CFM 25478 23966 22126 19515 BHP 2.75 2.87 2.96 2.97 TB-42Z530 3 855 95 CFM 22121 21308 20392 19297 17917 16026 14814 BHP 2.34 2.48 2.62 2.76 2.90 2.99 2.99 TB-42Z545 5 765 92 CFM 30218 28974 27564 25910 23741 BHP 4.59 4.73 4.86 4.96 4.99 TB-42Z530 5 1014 99 CFM 26234 25560 24830 24027 23113 21518 20816 19715 18423 BHP 3.91 4.07 4.24 4.40 4.57 4.81 4.88 4.96 5.00 TB-42Z545 711/2 875 95 CFM 34563 33490 32316 31007 29514 26769 BHP 6.87 7.03 7.18 7.31 7.43 7.44 TB-42Z530 71/2 1137 102 CFM 29416 28820 28185 27505 26768 25571 24968 23904 22891 20742 BHP 5.51 5.69 5.88 6.06 6.24 6.51 6.63 6.81 6.93 7.05 TB-42Z545 10 963 97 CFM 38039 37071 36031 34901 33654 31623 30562 BHP - 9.16 9.34 9.51 9.66 9.80 9.96 9.98 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type B: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. 26 Twin City Bulletin 4830 Performance Data - Belt Driven TB - Fabricated Steel Propeller SIZE CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) NUMBER HP RPM Lw1A 0.000 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TB- 48Z545 1 438 82 CFM 23988 20639 BHP 1.42 1.50 TB- 482535 ilk 521 86 CFM 22172 20198 17521 BHP 1.26 1.39 1.47 TB- 48Z545 2 482 85 CFM 26398 23522 BHP 1.90 1.98 TB-48Z535 2 573 86 CFM 24385 22628 20389 17607 BHP 1.68 1.82 1.93 1.99 TB-48Z545 3 551 88 CFM 30177 27782 24270 BHP 2.83 2.94 2.99 TB-48Z535 3 656 89 CFM 27917 26417 24663 22463 19952 BHP 2.52 2.68 2.83 2.92 2.99 48 TB-48Z545 5 653 93 CFM 35764 33821 31421 28027 BHP 4.72 4.85 4.95 4.96 TB-48Z535 5 802 95 CFM 34131 32931 31615 30134 28385 26472 24337 BHP 4.60 4.81 5.00 5.17 5.29 5.39 5.47 TB-48Z545 71/2 748 96 CFM 40966 39307 37393 35022 31886 BHP 7.09 7.24 7.37 7.47 7.44 TB-48Z535 7 891 99 CFM 37918 36847 35696 34444 33039 31429 29705 27902 BHP 6.30 6.54 6.76 6.96 7.13 7.26 7.37 7.48 TB-48Z545 10 823 99 CFM 45074 43582 41915 39985 37576 34579 BHP 9.44 9.61 9.76 9.88 9.98 9.88 TB-48Z535 10 981 102 CFM 41748 40782 39757 38663 37483 36167 34697 33134 31549 BHP 8.41 8.67 8.92 9.15 9.36 9.54 9.68 9.80 9.93 TB- 54Z545 11/2 330 78 CFM 28249 23759 BHP 1.39 1.49 TB- 54Z530 1 435 84 CFM 24568 22084 19091 BHP 1.20 1.35 1.48 T8- 54Z545 2 363 81 CFM 31074 27032 BHP 1.85 1.97 CFM 26996 24768 22206 18877 TB-54Z530 2 478 87 BHP 1.59 1.76 1.91 2.00 TB-54Z545 3 416 84 CFM 35611 32120 27904 BHP 2.78 2.93 2.99 TB-54Z530 3 547 90 CFM 30893 28975 26857 24436 21285 BHP 2.38 2.58 2.76 2.92 3.00 CFM 42202 39311 36235 31711 TB-54Z545 5 493 88 54 BHP 4.63 4.82 4.95 4.91 TB-54Z530 5 649 95 CFM 36654 35059 33352 31515 29485 27185 BHP 3.98 4.21 4.43 4.65 4.85 4.98 TB- 542545 71/2 564 93 CFM 48280 45779 43105 40374 BHP 6.94 7.16 7.33 7.46 TB-54Z530 7 742 98 CFM 41907 40522 39066 37527 35899 34140 32204 29962 BHP 5.95 6.21 6.47 6.72 6.97 7.20 7.37 7.48 TB-54Z545 10 621 95 CFM 53159 50901 48514 46067 43402 BHP 9.26 9.51 9.72 9.88 9.97 T8- 542530 10 817 100 CFM 46143 44890 43586 42223 40795 39296 37694 35954 34067 BHP 7.95 8.23 8.52 8.79 9.07 9.34 9.59 9.80 9.94 TB-54Z545 15 711 98 CFM 60864 58904 56861 54726 52600 50332 47009 BHP 13.90 14.19 14.45 14.66 14.84 14.96 14.85 T8- 542530 15 884 103 CFM 49927 48773 47578 46339 45051 43710 42310 40823 39223 35550 BHP 10.07 10.38 10.68 10.99 11.28 11.58 11.87 12.15 12.37 12.65 NOTES: 1. Performance certified is for installation Type B: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type 8: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Twin City Bulletin 4830 2^ Performance Data - Belt Driven TB - Fabricated Steel Propeller SIZE CATALOG MOTOR FAN STATIC PRESSURE (IN. W.G.) NUMBER HP RPM LwIA 0.000 0.125 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 TB-60Z545 2 321 81 CFM 35565 30193 BHP 1.85 1.98 CFM 31144 28423 24566 TB- 602530 2 426 85 BHP 1.63 1.80 1.96 TB-60Z545 3 368 84 CFM 40772 36414 BHP 2.79 2.95 TB-60Z530 3 488 89 CFM 35676 33377 30431 26761 BHP 2.45 2.64 2.84 2.98 TB-60Z545 5 436 89 CFM 48306 44818 40152 BHP 4.65 4.84 4.98 TB 602530 5 579 gq CFM 42329 40444 38276 35547 32452 28838 60 BHP 4.09 4.32 4.55 4.79 4.95 4.99 TB-60Z545 71/2 499 93 CFM 55286 52320 48739 43865 BHP 6.96 7.19 7.38 7.46 TB 602530 71/2 663 98 CFM 48470 46848 45057 43021 40525 37817 35000 30977 BHP 6.15 6.41 6.67 6.93 7.20 7.40 7.49 7.43 TB- 602545 10 549 95 CFM 60825 58168 55098 51319 46169 BHP 9.27 9.53 9.75 9.93 9.83 TB-60Z530 10 729 100 CFM 53295 51832 50248 48508 46515 44154 41691 39183 36033 BHP 8.17 8.46 8.75 9.03 9.33 9.62 9.84 9.94 9.95 TB-60Z545 15 629 99 CFM 69689 67405 64876 61999 58561 54182 BHP 13.95 14.24 14.51 14.74 14.94 14.88 TB-60Z530 15 796 103 CFM 58193 56861 55440 53910 52239 50319 48124 45864 43609 37582 BHP 10.64 10.95 112.6 11.58 11.89 12.22 12.54 12.78 12.92 12.88 TB 602545 20 693 101 CFM 76780 74724 72495 70040 67268 64009 60000 BHP 18.65 18.98 1929 19.56 19.80 20.00 19.92 TB-60Z545 25 746 103 CFM 82652 80752 78719 76518 74100 71375 68206 64396 BHP 23.27 23.62 23.96 24.27 25.54 24.80 24.97 24.84 NOTES: 1. Performance certified is for installation Type 6: Free inlet, ducted outlet. 2. Power rating (BHP) does not include transmission losses. 3. Performance ratings do not include the effects of appurtenances (accessories). 4. The sound power level ratings shown are in decibels, referred to 10 watts calculated per AMCA Standard 301. 5. Values shown are for inlet LwiA sound power levels for installation Type 8: Free inlet, ducted outlet. Ratings do not include the effects of end correction. 6. Sound power values shown are at the peak cataloged pressure for each RPM. Dimensional Data Mounting Brackets 4101 0 " I 1 I 0 ill* y r / D-, 00.625 TYP oriAr . aeci OW -a► Mai 6r4' 1111 _ ��� -.11.- amerw 00.625 TYP 45 .,� /}, 90. HORIZONTAL BASE MOUNT (HBM) HORIZONTAL CEILING HUNG (NCH) FAN SIZE A B 14 14.44 15.25 16 15.88 15.25 00.625 TYP 18 17.25 15.25 Q 21 19.25 17.25 24 21.50 17.25 A 30 25.75 22.25 36 30.38 23.25 ) 411. 42 34.75 27.25 A - 48 39.00 31.25 VERTICAL MOUNT (WI, VUO. VD!. VDO) 54 43.75 36.25 (TOP VIEW) 60 47.88 36.25 28 Twin City Bulletin 4830 Dimensional Data Di rect Drive — TD FLANGE CONSTRUCTION IS STANDARD ON FAN SIZES 18" THRU 48" E ..-- F AIRFLOW I . , I I 1 J i B A I r- - - -id- 4___ A (B.C.) C I�t,� _ _�f ,l (O.D.) (I.D.) �,�gr.. I I I I I ANGLE RING 1 = = -= b i �,�'� CONSTRUCTION - IS STANDARD ON FAN SIZE 14" I T F L { (N) "H" DIA. HOLES EQUALLY SPACED MAX. MAX. SIZE I A I B I C H I L N I E I F T BHP FRAME 14 16'/8 15% 141/4 1 Ys2 19 8 1.25 0.105 14 GA. 3/4 56 16 18% 17% 161 X 19 8 FLANGED 14 GA. 1 143T 18 20 19% 181/4 t 19 8 FLANGED 14 GA. 1 145T 21 24 22% 21 7 /16 21 8 FLANGED 14 GA. 11/2 145T 24 27 25% 241/4 7 /16 21 8 FLANGED 14 GA. 3 184T 30 331/2 32 30% 7 /16 26 8 FLANGED 14 GA. 5 184T 36 40 38% 36 7 /Is 27 16 FLANGED 12 GA. 10 215T 42 46 44% 421/4 9 /is 31 16 FLANGED 12 GA. 10 256T 48 52 50% 48% 9 /1s 35 16 FLANGED 12 GA. 10 256T Dimensions shown are in inches unless otherwise indicated. Dimensions are not to be used for construction. Belt Driven — TB BELT GUARD STANDARD UNLESS FLANGE CONSTRUCTION OPTIONAL MOTOR IS STANDARD ON FAN COVER IS SPECIFIED SIZES 16" THRU 60° F ■ 1 I 1 gy p. L 4 liirIMMIGiii m® (...r. II I II ,. it II (B.0.) kV i AIRFLOWi � r �� ANGLE RING CONSTRUCTION ��� IS STANDARD ON FAN SIZE 14" T L �I (N) "H" DIA. HOLES EQUALLY SPACED S I Z E I A I B I C I H I L I N I E I F 1 T 1 SHAFT ( FRAME 14 16 15% 14 71 /32 19 8 1.25 0.105 14 GA. 1 56 16 18 17% 16 11 /32 19 8 FLANGED 14 GA. 1 143T 18 201/4 191/4 18 71 /32 19 8 FLANGED 14 GA. 1 145T 21 24 22% 21 7 /,a 21 8 FLANGED 14 GA. 1 145T 24 27 25% 241/4 7 /16 21 8 FLANGED 14 GA. 1 184T 30 33 32 30 7 /a 26 8 FLANGED 14 GA. 1 213T 36 40 38% 361/2 7 /Is 27 16 FLANGED 12 GA. 1 215T 42 46 44 42 9 / 6 31 16 FLANGED 12 GA. 1 215T 48 52 50 48 8 /1 6 35 16 FLANGED 12 GA. 1 254T 54 59 57 54% 5 /8 40 16 FLANGED 12 GA. 1 256T 60 65 63 60 /8 5 /8 40 16 FLANGED 12 GA. 1 284T Dimensions shown are in inches unless otherwise indicated. Dimensions are not to be used for construction. Twin City Bulletin 4830 29 Typical Specifications Type TD — Direct Drive Tubeaxial fans shall be Type TD direct drive as manufactured by Twin City Fan & Blower, Minneapolis, Minnesota. PERFORMANCE — Fans shall be tested in accordance with AMCA 210 and AMCA 300 test codes for air moving devices and shall be guaranteed by the manufacturer to deliver rated published performance levels. Fans shall be licensed to bear the AMCA certified ratings seal for both sound and air. CONSTRUCTION — Housings shall be constructed of heavy gauge, continuously welded steel to prevent air leakage. Housings shall include punched inlet and outlet flanges for duct mounting. Motor supports shall be constructed of heavy -gauge steel and shall be suitably braced to prevent vibration or pulsation. PROPELLERS — Propellers shall be constructed of cast aluminum blades and hubs. Propellers shall be secured to the motor shaft with a taperlock bushing. MOTORS — All motors shall be split phase and capacitor start single phase or three phase induction, permanently lubricated, heavy -duty, ball bearing type, closely matched to the fan load and provided at the voltage, phase, hertz, and enclosure as provided on the fan schedule. FINISH AND COATING — The entire fan assembly, excluding the shaft, shall be thoroughly degreased and deburred before application of a rust - preventative primer. After the fan is completely assembled, a finish coat of paint shall be applied to the entire assembly. Aluminum components shall be unpainted. ACCESSORIES — When specified, accessories such as shaft seals, inlet bells, inlet and outlet guards, mounting brackets, vibration isolators and disconnect switches shall be provided by Twin City Fan to maintain one source responsibility. FACTORY RUN TEST — All fans prior to shipment shall be completely assembled and test run as a unit at operating speed or maximum RPM allowed for the particular construction type. Each propeller shall be statically and dynamically balanced in accor- dance with ,.ANSI /AMCA 204 -96 `Balance Quality and Vibration Levels for Fans" to Fan Application Category BV 3, Balance Quality Grade G6.3. Balance readings shall be taken by electronic type equipment in the axial, vertical, and horizontal directions on each of the bearings. Records shall be maintained and a written copy shall be available upon request. GUARANTEE — The manufacturer shall guarantee the workmanship and materials for its TD tubeaxial fans for at Least one (1) year from startup or eighteen (18) months from shipment, whichever occurs first. 30 Twin City Bulletin 4830 Typical Specifications Type TB — Belt Driven Tubeaxial fans shall be Type TB belt driven as manufactured by Twin City Fan & Blower, Minneapolis, Minnesota. PERFORMANCE — Fans shall be tested in accordance with AMCA 210 and AMCA 300 test codes for air moving devices and shall be guaranteed by the manufacturer to deliver rated published performance levels. Fans shall be licensed to bear the AMCA certified ratings seal for both sound and air. CONSTRUCTION — Housings shall be constructed of heavy gauge, continuously welded steel to prevent air leakage. Housings shall include punched inlet and outlet flanges for duct mounting. Motor and bearing supports shall be constructed of heavy -gauge steel and shall be suitably braced to prevent vibration or pulsation. PROPELLERS — Propellers shall be constructed of fabricated steel or cast aluminum blades and hubs. Propellers shall be secured to the fan shaft with a taperlock bushing. SHAFTS — Shafts shall be AISI 1045 cold rolled steel, accurately turned, ground, polished, and ring gauged for accuracy. Shafts shall be sized for the first critical speed of at least 1.43 times the maximum speed. BEARINGS — Bearings are to be pillow block, heavy -duty, anti- friction, self - aligning, grease lubricated, ball type. Each fan's bear- ings are sized with a minimum average life, per AFBMA, in excess of 200,000 hours when operating at the maximum RPM of the fan size. DRIVES — Motor sheaves shall be cast iron, and supplied as either variable pitch or fixed pitch. Drives and belts shall be rated for a minimum of 150% of the required motor FHI? MOTORS — All motors shall be single phase or three phase induction, permanently lubricated, heavy -duty, ball bearing type, closely matched to the fan load and provided at the voltage, phase, hertz, and enclosure as provided on the fan schedule. FINISH AND COATING — The entire fan assembly, excluding the shaft, shall be thoroughly degreased and deburred before application of a rust- preventative primer. After the fan is completely assembled, a finish coat of paint shall be applied to the entire assembly. The fan shaft shall be coated with a petroleum-based rust protectant. Aluminum components shall be unpainted. ACCESSORIES — When specified, accessories such as belt guards, motor covers, shaft seals, inlet bells, inlet and outlet guards, mounting brackets, vibration isolators and disconnect switches shall be provided by Twin City Fan to maintain one source respon- sibility. FACTORY RUN TEST — All fans prior to shipment shall be completely assembled and test run as a unit at operating speed or maximum RPM allowed for the particular construction type. Each propeller shall be statically and dynamically balanced in accor- dance with ANSI /AMCA 204 -96 `Balance Quality and Vibration Levels for Fans" to Fan Application Category BV-3, Balance Quality Grade G6.3. Balance readings shall be taken by electronic type equipment in the axial, vertical, and horizontal directions on each of the bearings. Records shall be maintained and a written copy shall be available upon request. GUARANTEE — The manufacturer shall guarantee the workmanship and materials for its TB tubeaxial fans for at least one (1) year from startup or eighteen (18) months from shipment, whichever occurs first. Twin City Bulletin 4830 31 FLAMMABLE FINISHES noncombustible supports or suspended by wire cables. Con- 1503.4.4 Solvent recycling. Solvent distillation equipment tainers supplying spray nozzles by gravity flow shall not used to recycle and clean dirty solvents shall comply with exceed 10 gallons (37.9 L) in capacity. Section 3405.4. 1503.3.2 Valves. Containers and piping to which a hose or flexible connection is attached shall be provided with a shutoff valve at the connection. Such valves shall be kept SECTION 1504 shut when hoses are not in use. SPRAY FINISHING 1504.1 General. The application of flammable or combustible 1503.3.3 Pumped liquid supplies. Where flammable or combustible liquids are supplied to spray nozzles by posi- liquids by means of spray apparatus in continuous or intermit - tive displacement pumps, pump discharge lines shall be tent processes shall be in accordance with the requirements of provided with an approved relief valve discharging ' to pump Sections 1503 and 1504. suction or a safe detached location. 1504.2 Location of spray - finishing operations. Spray finish - 1503.3.4 Liquid transfer. Where a flammable mixture is ing operations conducted in buildings used for Group A, E, I or transferred from one portable container to another, a bond R occupancies shall be located in a spray room protected with shall be provided between the two containers. At least one an approved automatic sprinkler system installed in accor- container shall be grounded. Piping systems for Class I and dance with Section 903.3.1.1 and separated vertically and hori- 11 liquids shall be permanently grounded. zontally from other areas in accordance with the International Building Code. In other occupancies, spray - finishing opera - 1503.3.5 Class I liquids as solvents. Class I liquids used as lions shall be conducted in a spray room, spray booth or spray - solvents shall be used in spray gun and equipment cleaning ing space approved for such use. machines that have been listed and approved for such pur- Exceptions: pose or shall be used in spray booths or spray rooms in accordance with Sections 1503.3.5.1 and 1503.3.5.2. 1. Automobile undercoating spray operations and machines for spray spray -on automotive lining operations conducted in 1503.3.5.1 Listed devices. Cleaning P y areas with approved natural or mechanical ventilation guns and equipment shall not be located in areas open to shall be exempt from the provisions of Section 1504 the public and shall be separated from ignition sources in when approved and where utilizing Class IIIA or 1IIB accordance with their listings or by a distance of 3 feet combustible liquids. (914 mm), whichever is greater. The quantity of solvent used in a machine shall not exceed the design capacity of 2 In buildings other than Group A, E, I or R occupan- the machine. cies, approved limited spraying space in accordance with Section 1504.9. 1503.3.5.2 Within spray booths and spray rooms. 3. Resin application areas used for manufacturing of When solvents are used for cleaning spray nozzles and auxiliary equipment within spray booths and spray reinforced plastics complying with Section 1509 shall rooms, the ventilating equipment shall be operated dur not be required to be located in a spray room, spray ing cleaning, booth or spraying space. 1503.3.6 Class II and III liquids. Solvents used outside of 15043 Design and construction. Design and construction of spray booths, spray rooms or listed and a roved s spray rooms, spray booths and spray spaces shall be in accor- PP P ra y n dance with Sections 1504.3 through 1504.3.3.1. and equipment cleaning machines shall be restricted to Class 11 and III liquids. 1504.3.1 Spray rooms. Spray rooms shall be constructed vapor and designed in accordance with this section and the Inter - 1503.4 Operations and maintenance. Flammable va P national Building Code, and shall comply with Sections areas, exhaust fan blades and exhaust ducts shall be kept free 1504.4 through 1504.8. from the accumulation of deposits of combustible residues. Where excessive residue accumulates in such areas, spraying 1504.3.1.1 Floor. Combustible floor construction in operations shall be discontinued until conditions are corrected. spray rooms shall be covered by approved, 1503.4.1 Tools. Scrapers, spuds and other tools used for noncombustible, nonsparking material, except where cleaning purposes shall be constructed of nonsparking combustible coverings, including but not limited to thin materials. P g paper or plastic and strippable coatings, are utilized over noncombustible materials to facilitate cleaning opera - 1503.4.2 Residue. Residues removed during cleaning and tons in spray rooms. debris contaminated with residue shall be immediately 1504.3.2 Spray booths. The design and construction of removed from the premises and properly disposed. spray booths shall be in accordance with Sections 1503.4.3 Waste cans. Approved metal waste cans equipped 1504.3.2.1 through 1504.3.2.6, Sections 1504.4 through with self - closing lids shall be provided wherever rags or 1504.8 and NFPA 33. waste are impregnated with finishing material. Such rags 1504.3.2.1 Construction. Spray booths shall be con - and waste shall be deposited therein immediately after structed of approved noncombustible materials. Alumi- being utilized. The contents of waste cans shall be properly num shall not be used. Where walls or ceiling assemblies disposed of at least once daily and at the end of each shift. are constructed of sheet metal, single -skin assemblies 2006 INTERNATIONAL FIRE CODE 163 lig ' reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing @ntpa.org. 33 SPRAYAPPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS 1.5 Equivalency. Nothing in this standard is intended to pre- 2.3.2 UL Publications. Underwriters Laboratories Inc., 333 vent the use of systems, methods, or devices of equivalent or Pfingsten Road, Northbrook, IL 60062. superior quality, strength, fire resistance, effectiveness, duty UL 340, Test for Comparative Flammability of Liquids, 1997. bility, and safety over those prescribed by this standard. iii 1.5.1 Technical documentation shall be submitted to the au- UL 900, Test Performance of Air Pilter Units, 1994. thority haying jurisdiction to demonstrate equivalency. UL 2208, Standard for Solvent Distillation Units, 1996. IIII 1.5.2 The system, method, or device shall be approved for the intended purpose by the authority having jurisdiction. 1.6 Units and Formulas. The units of measurement used in Chapter 3 Definitions Illi this standard shall be the International System of Units, other- 3.1 General. The definitions contained in this chapter shall wise known as "SI" and "Modernized Metric System." English apply to the terms used in this standard. Where terns are not customary units are given in parentheses following SI units, included, common usage of the terms shall apply. but shall be considered to be approximate conversions. 3.2 NFPA Official Definitions. IIII 1.7 Enforcement. (Reserved) 3.2.1* Approved. Acceptable to the authority having jurisdic- tion. Chapter 2 Referenced Publications 3.2.2* Authority Having Jurisdiction (AHJ). An organization, ma office, or individual responsible for enforcing the require - 2.1 General. The documents or portions thereof listed in this ments of a code or standard, or for approving equipment, materials, an installation, or a procedure. chapter are referenced within this standard and shall be con- sidered part of the requirements of this document. 3.2.3 Labeled. Equipment or materials to which has been mg attached a label, symbol, or other identifying mark of an 2.2 NFPA Publications. National Fire Protection Association, organization that is acceptable to the authority having juris- 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269 -9101. diction and concerned with product evaluation, that main - NFPA 10, Standard for Portable Fire Extinguishers, 2002 edition. tarns periodic inspection of production of labeled equip Ell NFPA 12, Standard on Carbon Dioxide Extinguishing Systems, ment or materials, and by whose labeling the manufacturer 2000 edition. indicates compliance with appropriate standards or perfor- NFPA 13, Standard for the Installation of Sprinkler Systems, 2002 mance in a specified manner. edition. 3.2.4* Listed. Equipment, materials, or services included in a il l NFPA 16, Standard for the Installation of Foam -Water Sprinkler list published by an organization that is acceptable to the au- and Foam -Water Spray Systems, 2003 edition. thority having jurisdiction and concerned with evaluation of NFPA 17, Standard for Dry Chemical Extinguishing Systems, products or services, that maintains periodic inspection of 2002 edition. production of listed equipment or materials or periodic evalu- NFPA 30, Flammable and Combustible Liquids Code, 2003 ation of services, and whose listing states that either the equip - edition. ment, material, or service meets appropriate designated stan- dards or has been tested and found suitable for a specified NFPA 69, Standard on Explosion Prevention Systems, 2002 edition. purpose. N NFPA 70, National Electrical Code 2002 edition. 3.2.5 Standard. A document, the main text of which contains NFPA 72 National Fire Alarm Code ® , 2002 edition. only mandatory provisions using the word "shall" to indicate NFPA 86, Standard for Ovens and Furnaces, 2003 edition. requirements and which is in a form generally suitable for NFPA 91, Standard for Exhaust Systems for Air Conveying of mandatory reference by another standard or code or for adop- N Vapors, Gases, Mists, and Noncombustible Particulate Solids, 1999 tion into law. Nonmandatory provisions shall be located in an edition. appendix or annex, footnote, or fine -print note and are not to NFPA 101n, Life Safety Code 2003 edition. be considered a part of the requirements of a standard. NFPA 220, Standard on Types of Building Construction, 1999 3.3 General Definitions. III edition. NFPA 432, Code for the Storage of Organic Peroxide Formulations, 3.3.1 Area. 2002 edition. 3.3.1.1 Flash -Off Area. An open or enclosed area after a NFPA 496, Standard for Purged and Pressurized Enclosures for spray application process where vapors are released due to III Electrical Equipment, 2003 edition. exposure to ambient air or a heated atmosphere. NFPA 701, Standard Methods of Fire Tests for Flame Propagation of Textiles and Films, 1999 edition. 3.3.1.2 Resin Apphc a s p Area. Any area in which polyester NFPA 2001, Standard on Clean Agent Fire Extinguishing Sys- resins or gelcoats are s pray applied. tems, 2000 edition. 3.3.1.3* Spray Area. Any area in which dangerous quan- 2.3 Other Publications. tities of flammable or combustible vapors, mists, resi- dues, dusts, or deposits are present due to the operation 2.3.1 ASME Publication. American Society of Mechanical of spray processes. It can be either enclosed or unen- Engineers, Three Park Avenue, New York, NY 10016-5990. closed and includes: (a) any area in the direct path of a spray application process; (b) the interior of any exhaust ASME Boiler and Pressure Vessel Code, Section VIII, 1998. plenum and any exhaust duct leading from the spray iii 2003 Edition 1 Copyright 2007 by National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on November 5, 2007 to ALLYN DANNHOFF of OSHKOSH CITY OF. No other oi l reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing @nfpa.org. DEFINITIONS 33-7 process; (c) the interior of any limited finishing worksta procedures and apparatus set forth in 1.7.4. Flammable liq lion, spray booth, or spray room, as herein defined; (d) uids shall be classified as Class I as follows: Class I Liquid — the interior of any air recirculation particulate filter, sol- any liquid that has a closed -cup flash point below 37.8 °C vent concentrator unit, solvent distillation (recovery) (100 °F) and a Reid vapor pressure not exceeding 2.7 bar unit, or recirculation air supply unit. (40 psia) at 37.8 °C (100 °F), as determined by ASTM D 323, 3.3.1.3.1 Unenclosed Spray Area. Any spray area that is not Standard Method of Test for Vapor Pressure of Petroleum Products confined by a limited finishing workstation, spray booth, or (Reid Method). Class I liquids shall be further classified as I IIIII spray room, as herein defined. follows: (1) Class IA liquids — those liquids that have flash points below 22.8 °C (73 °F) and boiling points below 3.3.2 Chopper Gun. A device that feeds glass fiber roving 37.8 °C (100 °F); (2) Class IB liquids — those liquids that through a cutting unit and injects the cut glass fibers into a have flash points below 22.8 °C (73 °F) and boiling points at stream of catalyzed liquid resin that is then sprayed onto a or above 37.8 °C (100 °F); (3) Class IC liquids — those liq- surface. aids that have flash points at or above 22.8 °C (73 °F), but 3.3.3 Combustible Powder. Any finely divided solid coating below 37.8 °C (100 °F). [30:1.7] material that is capable of being ignited. 3.3.8 Material. id 3.3.4 [Electrical] Utilization Equipment. Equipment that uti- lizes electric energy for electronic, electromechanical, chemi- 3.3.8.1 Flammable or Combustible Material. Any material, I cal, heating, lighting, or similar purposes. [70:100] including its residue, that is used in the spray application process and also meets one of the following definitions, id 3.3.5 Fluidized Bed. A chamber holding powder coating ma- as given elsewhere in this section: (1) Flammable Liquid, terial that is aerated from below to form an air - supported, ex- (2) Combustible Liquid, (3) Combustible Powder. paraded cloud of the powder. The object or material being coated is preheated, then immersed into the cloud. 3.3.8.2 Noncombustible Material. A material that, in the 3.3.5.1 Electrostatic Fluidized Bed. A chamber holding form in which it is used and under the conditions antici- III powder coating material that is aerated from below to form paled, will not ignite, burn, support combustion, or re- an air - supported, expanded cloud of the powder. The pow- lease flammable vapors when subjected to fire or heat. 1 d er is electrically charged with a charge opposite to that of Materials that are reported as passing ASTM E 136, Stan - the object or material being coated. dard 'Pest Method for Behavior of Materials in a Vertical Tube Furnace at 750 °C, shall be considered noncombustible 3.3.6 Limited Combustible. Abuilding construction material materials. [220:2.1] not complying with the definition of noncombustible material that, in the form in which it is used, has a potential heat value 3.3.9 Nonincendive. Electrical equipment and associated wir- id not exceeding 8140 kJ /kg (3500 Btu /lb), where tested in ac- ing that are incapable, under normal operating conditions, of cordance with NFPA 259, Standard Test Method for Potential Heat releasing sufficient electrical or thermal energy to cause igni- of Building Materials, and complies with (a) or (b): (a) materi- tion of specific hazardous materials in their most easily ignited als having a structural base of noncombustible material, with a concentrations in air. i surfacing not exceeding a thickness of 3 mm (IA in.) that has a 3.3.10 Overspray. Any sprayed material that is not deposited flame spread index not greater than 50; and (b) materials, in on the intended object. the form and thickness used, other than as described in (a), 1 having neither a flame spread index greater than 25 nor evi- 3.3.11 Readily Accessible. Capable of being removed or ex- dente of continued progressive combustion and of such com- posed without damaging the equipment or system or the MIA position that surfaces that would be exposed by cutting building structure or finish, or not permanently enclosed. through the material on any plane would have neither a flame spread index greater than 25 nor evidence of continued pro- 3.3.12* Spray Booth. A power - ventilated enclosure for a gressive combustion. (Materials subject to increase in combus- spray application operation or process that confines and IA tibility or flame spread index beyond the Limits herein estab limits the escape of the material being sprayed, including fished through the effects of age, moisture, or other vapors, mists, dusts, and residues that are produced by the atmospheric condition shall be considered combustible.) spraying operation and conducts or directs these materials d 3.3.7 Liquid. Any material that has a fluidity greater than to an exhaust system. that of 300 penetration asphalt when tested in accordance 3.3.12.1 Thy Type Spray Booth. A spray booth that is not with ASTM D 5, Standard Test Method for Penetration of Bitumi equipped with a water- washing system to remove overspray 1 nous Materials. [30:1.7] from the exhaust airstream and is equipped with one or 3.3.7.1 Combustible Liquid. Any liquid that has a closed- more of the following: (1) distribution or baffle plates to cup flash point at or above 37.8 °C (100 °F), as determined promote an even flow of air through the booth or to reduce by the test procedures and apparatus set forth in 1.7.4. the overspray before it is pulled into the exhaust system; I Combustible liquids are classified as Class II or Class III as (2) dry media filters, either fixed or on rolls, to remove iii follows: Class Illiquid— any liquid that has a flash point at overspray from the exhaust airstream; (3) powder collec- or above 37.8 °C (100 °F) and below 60 °C (140 °F); ClassIIIA tion systems that capture powder overspray. — any liquid that has a flash point at or above 60 °C 3.3.12.2 Water-wash Spray Booth. A spray booth that is (140 °F), but below 93 °C (200 °F); Class IIIB — any liquid equipped with a water- washing system designed to mini - that has a flash point at or above 93 °C (200 °F). [30:1.7] mize the concentrations of dusts or residues entering ex- 3.3.7.2 Flammable Liquid. Any liquid that has a closed -cup haust ducts and to permit the collection of the dusts or 1 flash point below 37.8 °C (100 °F), as determined by the test residues. 2003 Edition ill I Copyright 2007 by National Fire Protection Association (NFPA). Licensed, by agreement, for Individual use and single download on November 5, 2007 to ALLYN DANNHOFF of OSHKOSH CITY OF. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing @nfpa.org. 33-14 SPRAYAPPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS (1) The sprayed materials used will not react and cause ignition of Chapter 8 Storage, Handling, and Distribution of the residue in the ducts. Flammable and Combustible Liquids (2) No nitrocellulose -based finishing material is used. rn (3) An air - cleaning system is provided to reduce the amount of over 8,1 * General. Storage, handling, and mixing of flammable spray carried into the duct manifold. and combustible liquids shall meet all the applicable require - (4) Automatic sprinkler protection is provided at the junction of each ments of NFPA 30. Storage, handling, and mixing of flam- booth exhaust with the manifold, in addition to the protection mable and combustible liquids at process areas shall also meet 110 required by Chapter 9. the requirements of this chapter. (5) The installation is approved by the authority having jurisdiction. 8.2 Storage in Process Areas. 7.7 Materials of Construction. Exhaust ducts and fasteners 8.2.1 There shall be not more than three approved flam- shall be constructed of steel. mable liquid storage cabinets in any single process area with - Exception: Other materials of construction shall be permitted to be out the approval of the authority having jurisdiction. Storage used in cases where the conveyed materials are not compatible with cabinets shall be listed or shall be designed and constructed to steel meet the requirements of NFPA 30. Any single cabinet shall III contain not more than 454 L (120 gal) of Class I, Class II, or 7.8* Support of Exhaust Ducts. Exhaust ducts shall be sup- Class ILIA liquids, of which not more than 227 L (60 gal) shall ported to prevent collapse under fire conditions. be Class I and Class II liquids. 7.8.1 Duct supports shall be designed to carry the weight of 8.2.2 The quantity of liquid located in the vicinity of spraying U the duct system itself, plus the anticipated weight of any resi- operations, but outside of a storage cabinet; an inside storage dues. If sprinkler protection is provided inside the duct sys- room; a cut -off room or attached building; or other specific tem, then the duct supports also shall be designed to carry the process area that is cut off by at Least a 2 -hour fire -rated sepa- anticipated weight of any accumulation of sprinkler discharge. ration from the spraying operations, shall not exceed the III 7.8.2 Hangers and supports shall be fastened securely to the quantity given in either (1) or (2), whichever is greater. building or to the structure to avoid vibration and stress on the (1) A supply for one day duct system. (2) 95 L (25 gal) of Class IA liquids in containers, plus 454 L (120 gal) of Class IB, Class IC, Class II, or Class III liquids 11 7.8.3 Hangers and supports shall be designed to allow for expansion and contraction. in containers, plus 2 portable tanks each not exceeding 2500 L (660 gal) of Class IB, Class IC, Class II, or Class IIIA 7.8.4 Exhaust ducts shall not use building walls, floors, ceil- liquids, plus 20 portable tanks each not exceeding 2500 L ings, or roofs as component parts. (660 gal) of Class IIIB liquids �j 7.9 Exhaust Duct Access Openings. Exhaust ducts shall be 8.2.3 The quantity of flammable and combustible liquids lo- provided with doors, panels, or other means to facilitate in- cated in a spray area or in a mixing room adjacent to a spray spection, maintenance, cleaning, and access to fire protection area shall meet the requirements of Section 8.3. devices. 8.3 Mixing. 7.10 Exhaust Fans and Drives. 8.3.1 Dispensing or transfer of liquids from containers, mix - ing of liquids, and filling of containers, including portable 7.10.1 The rotating element of the exhaust fan shall be II nonferrous or the fan shall be constructed so that a shift of mixing tanks and "pressure pots," shall be done only in a mix- the impeller or shaft will not permit two ferrous parts of the ing room or in a spray area. fan to rub or strike. There shall be ample clearance be- 8.3.2 Mixing rooms shall meet all of the following require - tween the rotating element and fan casing to avoid a fire by ments: friction, necessary allowances being made for ordinary ex- pansion and loading and to prevent contact between mov- (1) The mixing room shall meet the construction require - ing parts and the duct or fan housing. Fan blades shall be ments of Section 5.1. (2) The a mounted on a shaft that is sufficiently heavy to maintain area of the mixing room shall not exceed 14 m Iti alignment even when the blades of the fan are heavily (150 ft ). loaded. All bearings shall be of the self- lubricaten a or (3) The mixing room shall be designed to contain a spill of g tYP the contents in the room. shall be lubricated from a point outside the duct and pref- (4) The mixing room or a spray area used for mixing and erably shall be located outside the duct and the booth. dispensing operations shall be provided with continuous 1 7.10.2 Electric motors that drive exhaust fans shall not be mechanical ventilation capable of providirT not less than placed inside any spray area unless they meet the provisions of 0.3 m per minute of air movement per m of floor area 6.2.2. P (1 ft /ft or 4 m (150 ft /min), whichever is greater. The ventilation system shall be in operation 7.10.3 Belts shall not enter any spray area unless the belt and at all times. pulley within the spray area are completely enclosed. (5) Dispensing and mixing rooms shall be classified, for pur- 7.11* Drying Areas. Freshly sprayed workpieces shall be dried poses of electrical area classification, the same as enclosed only in spaces that are ventilated to prevent the concentration spray booths, room in accordance o vh d wi le of vapors from exceedin 25 ercent of the lower flammable (6) The mixing room shall be provided with an approved au- g P tomatic fire protection system that meets all applicable limit. (See also Chapter 13.) requirements of Chapter 9. m i 2003 Edition if _ ____ gm Copyright 2007 by National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on November 5, 2007 to ALLYN DANNHOFF of OSHKOSH CITY OF. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing ©nfpa.org. ELECTRICAL AND OTHER SOURCES OF IGNITION 33 - 0 shall be separated from the fixture to prevent the surface tem- Exception: This requirement shall not apply to drying, curing, or perature of the panel from exceeding 93 °C (200 °F). fusing apparatus covered by Chapter 13. 0 5.6 Ventilation. Spray areas that are equipped with ventilation 6.2.6* Any utilization equipment or apparatus that is capable distribution or baffle plates or with dry overspray collection of producing sparks or particles of hot metal and is located filters shall meet the requirements of 5.6.1 through 5.6.5. above or adjacent to either the spray area or the surrounding Division 2 or Zone 2 areas shall be of the totally enclosed type 5.6.1 Distribution plates or baffles shall be constructed of ffil noncombustible materials and shall be readily removable or or shall be constructed to prevent the escape of sparks or par - accessible for cleaning on both sides. titles of hot metal. 5.6.2 Filters shall not be used when applying materials known 6.3 Electrical Area Classification. to be highly susceptible to spontaneous heating or spontane- ous ignition. 6.3.1* Class I Locations. A Class I location shall be any loca- tion where a flammable gas or vapor is present or might be 5.6.3 Supports and holders for filters shall be constructed of present in the air in quantities sufficient to produce an explo- noncombustible materials. sive or ignitable mixture. mg 5.6.4 Overspray collection filters shall be readily removable 6.3.1.1* Class I, Division 1 Locations. A Class I, Division 1 or accessible for cleaning or replacement location shall be any location where one of the following con - 5.6.5 Filters shall not be alternately used for different types of ditions exist rim coating materials if the combination of the materials might result (1) Where an ignitable concentration of flammable gas or isi in spontaneous heating or ignition. (See also Section 10.8.) vapor can exist under normal operating conditions. (2) Where an ignitable concentration of flammable gas or vapor can exist frequently because of repair or mainte- PIA Chapter 6 Electrical and Other Sources of Ignition nance operations or because of leakage. (3) Where breakdown or faulty operation of equipment or 6.1 Scope. This chapter shall apply to electrical wiring and processes might release an ignitable concentration of electrical utilization equipment that is used in the spray area flammable gas or vapor and might also cause simulta- or in the vicinity of the spray area. This chapter shall also apply neous failure of electrical equipment in such a way as to to other sources of ignition. directly cause the electrical equipment to become a 6.2* General. source of ignition. 6.2.1 Electrical wiring and utilization equipment shall meet 6.3.1.2* Class I, Division 2 Locations. A Class I, Division 2 location shall be any location where one of the following con- all applicable requirements ofArticles 500, 501, 502, 505, and NI 516 of NFPA 70, National Electrical Code, and all applicable re- ditions exist: quirements of this chapter. (1) Where a flammable gas or a volatile flammable liquid is Exception No. 1: Powered vehicles shall meet the requirements of Sec- handled, processed, or used, but any flammable gas, va- Lion 5.4. por, or liquid is confined within a closed container or a Exception No. 2: Resin application operations shall meet the require- uire closed system from which it can escape only in case of meets of Chapter 17. q accidental rupture or breakdown of the container or sys tem or in case of abnormal operation of the equipment. 6.2.2* For the purposes of this standard, the Zone system of (2) Where an ignitable concentration of flammable gas or electrical area classification shall be applied as follows: vapor is normally prevented by positive mechanical venti- lation, but which might exist because of failure or abnor- (1) The inside of open or closed containers or vessels shall be mal operation of the ventilating equipment. IN considered a Class I, Zone 0 location. (2) AClass 1, Division 1 location shall be permitted to be alter- (3) Where an ignitable concentration of flammable gas or natively classified as a Class I, Zone 1 location, vapor might occasionally be transmitted from an adjacent (3) AClass I, Division 2 location shall be permitted to be alter- Class I, Division 1 location, unless such transmission is natively classified as a Class I, Zone 2 location. prevented by positive pressure ventilation from a source 6.2.3 For the purposes of electrical area classification, the failure are provided. Division system and the Zone system shall not be intermixed of clean air and effective safeguards against ventilation for any given source of release. 6.3.1.3* Class I, Zone 0 Locations. A Class I, Zone 0 location IIII 6.2.4 Where areas in the same facili are classified se aratel ; shall be any location where an ignitable concentration of flam- t l separately, a Class I, Zone 2 location shall be permitted to abut, but shall mable gas or vapor is present either continuously or for lon periods of time. not overlap, a Class I, Division 2 location. A Class I, Zone 0 or Class I, Zone 1 location shall not abut a Class I, Division 1 or a 6.3.1.4* Class I, Zone 1 Locations. AClass I, Zone 1 location shall MI Class I, Division 2 location. [70:505.7(B) ] be any location where one of the following conditions exist 6.2.5* Open flames, spark- producing equipment or processes, (1) Where an ignitable concentration of flammable gas or and equipment whose exposed surfaces exceed the autoigni- vapor is likely to exist under normal operating conditions. II/ tion temperature of the material being sprayed shall not be (2) Where an ignitable concentration of flammable gas or located in a spray area or in any surrounding area that is clas- sifted as Division 2 or Zone 2. vapor can exist frequently because of repair or mainte nance operations or because of leakage. id 2003 Edition N Iiir