HomeMy WebLinkAboutE-mail on venting 1/6/07
. .~,
Zarate, John F.
From:
Sent:
To:
Subject:
Chad C [ChadC@pellethead.com]
Saturday, January 06,20078:47 AM
Zarate, John F.
RE: 2365 Burnwood venting
John,
We replaced the venting about two weeks ago and haven't heard anything back. Can I assume we are good? Please let
me know.
Thank you,
Chad Curtis
ESES
From: Zarate, John F. [mailto:jzarate@ci.oshkosh.wi.us]
Sent: Tuesday, December 12, 2006 7:06 AM
To: Chad C
Subject: RE: 2365 Burnwood venting
That will be fine. As long as there is a minimum of 48" of separation between the vent termination of the pellet stove and
the makeup air inlet for the house. We can verify that for compliance when you have it corrected.
Thanks
John Zarate
-----Original Message-----
From: Chad C [mailto:ChadC@pellethead.com)
Sent: Monday, December 11,20063:49 PM
To: Zarate, John F.
Subject: RE: 2365 Burnwood venting
John,
1
.'"
I called the manufacturer (Quad) and they agreed with me that the manual was confusing. They couldn't or wouldn't
give me a straight answer so I would like to take the more cautious approach and raise the vent on the outside of the
house to reach the 4' clearance. Is that okay with you?
Thank you,
Chad
From: Zarate, John F. [mailto:jzarate@ci.oshkosh.wi.us]
Sent: Thursday, December 07, 2006 10:50 AM
To: Chad C
Subject: 2365 Burnwood venting
Chad,
I have the photos of the exterior venting attached. Hopefully they come through ok for you.
John Zarate
<<2365 Burnwood 12-1-06.doc>>
2