Loading...
HomeMy WebLinkAboutBuilding #T1-39-0506 Revision ~ OJHKOfH City of Oshkosh Division of Inspection Services 215 ChucchAvenue PO Box 1130 Oshkosh WI 54903-1130 www.ci.oshkosh.wi.us O",HE WATER May 10, 2006 Thomas Karrels Thomas R. Karrels P.E.S.C. 1934 Algoma Blvd Oshkosh, WI 54901 Oshkosh Tmck Corp 2307 Oregon St Oshkosh, WI 54902 Site: Oshkosh Truck Corp North Plant 2307 Oregon St Oshkosh WI 54902 For: Description: Tenant space alterations Object Type: Building only Class of Cons traction: 1m -11518 Sq Ft.; Occupancy: B: Business / Office Plan Number: Tl-39-0506 sprinklered The submittal described above has been reviewed for conformance with applicable Wisconsiu Administrative Codes and Wisconsiu Stalntes. The submittal has been CONDITIONALLY APPROVED. The owner, as defined in Chapter 101.01(10), Wisconsin Stalntes, is responsible for compliance with all code requirements Key Item(s) / Conditions: IBC 711.3 Any penetrations of fire rated assemblies are required to be protected with a listed firestopping system that matches the rating of the wall assembly being penetrated. Copies ofthe firestopping systems are required to be provided at the time of inspection. IBC 901.2 Fire protection systems shall be installed, repaired, operated and maintained in accordance with this code and the international fire code. (Construction of new walls may require the addition and or relocation of sprinkler heads to maintain required coverage, and not obstruct spray patterns offire sprinklers) IFC 901.4 Fire protection systems shall be maintained in accordance with the original installation standards for that system. Required fire protection systems shall be extended, altered, or augmented as necessary to maintain and continue protection whenever the building is altered, remodeled or added to. Alterations to fire protection systems shall be done in accordance with applicable standards. Submit plans for fire sprinkler modifications. IBC 906.1/ IFC 906.3 The maximum travel distance allowed to a fire extinguisher is 75 feet. IBC 1003.2.10 Exit signs are required to be installed per this section ¡r,\¡',Ümn\2006 Comm Plan 1\e,iew\"1"I-.'9-0506 2.JO7 O;ogon S, Bklg Only.doc Page 1 of3 IBC 1003.2.11 Means of egress illumination is required to be installed per this section. All paths of egress are required to have adequate emergency lighting to meet the performance requirements of IBC 1003.2.11.3. Existing means of egress emergency lighting is permitted to be maintained in compliance with the code in effect at the time of construction. Any altered path of egress, or new path of egress, and any new emergency lighting being installed is required to comply with current code requirements. IBC 2406.2 Glazing in an individual fixed or operable panel adjacent to a door where the nearest exposed edge of the glazing is within a 24 inch arc of either vertical edge of the door in a closed position and where the bottom exposed edge of the glazing is less than 60 inches above the walking surface is requires safety glazing materials. IBC 2902..1/ Table 2902 Drinking water is required to be provided, since no drinking fountain is shown on plans a bottled water cooler is required to be provided. IBC 3408.6 Alterations affecting an area containing a primary function. Where an alteration affects the accessibility to, or contains an area of primary function, the route to the primary function area shall be accessible. The accessible route to the primary function area shall include toilet facilities or drinking fountains serving the area of primary function. Per email on May 9'h men's room door on first floor will have power operator installed in lieu of removing wing wall to provide required clearance. Additionally per fax on May 4'", the men's room will be modified per sketch provided. Comm 61.30(3) This review does not include lighting. Comm 63.0001 Prior to installation, lighting plans and calculations shall be prepared in compliance with the code. The plans shall be available upon request. Comm 61.30(3) / IMC 507.2 This plan review does not include heating, ventilatiou, or air conditioning. HV AC plans are required to be submitted and approved prior to installation ofHV AC equipment. Comm 61.31(4) Revisions to approved plans. All proposed revisions and modifications which involve rules under this code and which are made to construction documents that have previously been granted approval by the department or its authorized representative, shall be submitted to the office that granted the approval. All revisions and modifications to plans shall be approved in writing by the department or its authorized representative prior to the work involved in the revision or modification being carried out. A revision or modification to a plan, drawing or specification shall be signed and sealed in accordance with Comm 61.31(1). SUBMIT: . Comm 61.50 (4) Supervision. Prior to the initial occupancy of an alteration the supervising professional shall file a compliance statement form SBD-9720 with this office. A copy of the approved plans, specifications, and this letter shall be on-site duriug construction. All pennits are required to be obtaiued prior to commencement of work. In grantiug this approval the City of Oshkosh Inspection Services Department reserves the right to require changes or additions should conditions arise making them necessary for code compliance. As per state stats 101.12(2), nothiug iu this review shan relieve the designer of the responsibility for designiug a safe buildiug, structnre, or component H::I,riann'200(i Comm Plan He,;ew'.TI..'9.()5ù62307 Oft'gon St Bldg Only.d."" Page2of3 Inquiries concerning this correspondence may be made to me at the number listed below or the address on this letterhead. R~/ k/~ Buildiug Systems Consultant (920) 236-5051 Monday- Friday 7:30 A.M. to 8:30 A.M and 12:30 AM to 1:30 P.M. bnoe@ci.oshkosh.wi.us cc: Property file Fee Required $ Fee Received $ Balance Due $ 770.00 770.00 0.00 ft\bri~m'2006 Comm Phm Rovicw\T1.39.0506 2307 O;egon St Bldg Only.doc Page 3 00